Chicago Electric 96531 - Manuals

Chicago Electric 96531 – Manual in PDF format online.

Manuals:

Manual

Manual Chicago Electric 96531

Summary

Page 2 - contents

Page 2 SKU 96531 For technical questions, please call 1-800-444-3353. contents iMportant saFetY inForMation ............................ 3 general saFetY rules ................................................. 3 Work area .................................................................................

Page 3 - saVe this Manual; iMportant saFetY inForMation; DANgEr

Page 3 SKU 96531 For technical questions, please call 1-800-444-3353. saVe this Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram...

Page 4 - general saFetY rules; The term “power tool” in all of the warnings listed

Page 4 SKU 96531 For technical questions, please call 1-800-444-3353. general saFetY rules Warning! read all instructions Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury. The term “power tool” in all of the warnings listed below refers to you...

Page 5 - use safety equipment. always wear eye protection.; Safety equipment; power tool use and care; Do not use the power tool if the switch does not turn it on and off.; Disconnect the plug from the power source and from the power tool; Such preventive safety measures reduce the risk of starting the; service; cal replacement parts.

Page 5 SKU 96531 For technical questions, please call 1-800-444-3353. use safety equipment. always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, heavy-duty work gloves, hard hat, or hearing protection used for appropriate conditions will re- duce personal injuries. ...

Page 6 - speciFic saFetY rules; et seq; saVe these instructions.; grounDing; improperly connecting grounding wire can result in electric; WArNINg

Page 6 SKU 96531 For technical questions, please call 1-800-444-3353. speciFic saFetY rules Maintain labels and nameplates on the tool. These carry important safety infor- mation. If unreadable or missing, contact Harbor Freight Tools for a replacement.Avoid unintentional starting. Prepare to begin ...

Page 7 - grounded tools: tools with three prong plugs; -prong plug and outlet; Double insulated tools: tools with two prong plugs; Grounded

Page 7 SKU 96531 For technical questions, please call 1-800-444-3353. before use. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician. grounded tools: tools with three prong plugs Tools marked with “Grounding Required” have a three wire cord and three prong...

Page 8 - recoMMenDeD MiniMuM Wire gauge For eXtension corDs*

Page SKU 96531 For technical questions, please call 1-800-444-3353. As the distance from the supply outlet increases, you must use a heavier gauge extension cord. Using extension cords with inadequately sized wire causes a serious drop in voltage, resulting in loss of power and possible tool damage....

Page 9 - symbology; speciFications; unpacking; on the cover of this manual as soon as possible.; list of contents; set up instructions

Page 9 SKU 96531 For technical questions, please call 1-800-444-3353. symbology Double Insulated V~ Volts Alternating Current Canadian Standards Association a Amperes Underwriters Laboratories, Inc. n0 xxxx/min. No Load revolutions per Minute (rPM) speciFications Electrical Requirements 120 V~ / 60 ...

Page 10 - to the Assembly Diagram near the end of this manual.; assembly; 20V AC electrical outlet.; Functions; The Digital Soldering Station is designed to heat; operating instructions; read the entire iMportant saFetY inForMation section at the; tool set up

Page 10 SKU 96531 For technical questions, please call 1-800-444-3353. note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual. assembly Match up holes in Plug (27) to pins in Cord Connection (6), plug in, and secu...

Page 11 - Work piece set up; the solder’s directions) to perform the soldering operation.; never use acid core; the joint which you are soldering.; general operating instructions

Page 11 SKU 96531 For technical questions, please call 1-800-444-3353. Place Handle in the Handle rest (black socket) and wait 20 seconds until Solder- ing Tip heats up. Work piece set up If wires are to be soldered, thoroughly clean and scrape the wires so that only the clean copper is showing. Spl...

Page 12 - Maintenance anD serVicing; risk of serious personal injury from accidental starting or

Page 12 SKU 96531 For technical questions, please call 1-800-444-3353. Check to be sure the objects being joined will not be damaged by the heat of soldering. This tool generates a temperature up to 96°F. Test a scrap piece or inconspicuous area of your work piece with the soldering tip before proce...

Page 13 - inspect the general condition of the tool. Check for dam-; Warning! if the supply cord of this power tool is damaged, it must be; Tip cannot heat up properly when cracked or eroded.; replacing the Fuse; replace cover and screw back into place.

Page 13 SKU 96531 For technical questions, please call 1-800-444-3353. (4), and unplug the tool from its electrical outlet before performing inspection, maintenance, or cleaning procedures.Damaged equipment can fail, causing personal injury. Do not use damaged equipment. if abnormal noise or vibrati...

Page 14 - parts list & asseMblY DiagraM; part

Page 14 SKU 96531 For technical questions, please call 1-800-444-3353. parts list & asseMblY DiagraM part Description Qty 1 Upper Cover 1 2 Base 1 3 Panel 1 4 Power Switch 1 5 LCD Display 1 6 Cord Connection 1 7 Anti-Static 1 Temperature Dial 1 9 Cushion 1 10 Power Wire group 1 11 Transformer 1 ...

Page 15 - liMiteD 90 DaY WarrantY; WArrANTIES OF MErCHANTABILITy AND FITNESS.; record; able individually as replacement parts.

Page 15 SKU 96531 For technical questions, please call 1-800-444-3353. liMiteD 90 DaY WarrantY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this prod - uct is free from defects in mater...