Chicago Electric 96299 - Manual
Chicago Electric 96299 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – PRODUCT SPECIFICATIONS; Save This Manual; GENERAL SAFETy RULES; READ AND UNDERSTAND ALL INSTRUCTIONS; Work Area; Keep your work area clean and well lit.; Cluttered benches and dark areas; Keep bystanders and children away while operating a power tool.; Distractions
- Page 4 – Service; tions in this manual.; SPECIFIC SAFETy RULES; Maintain a safe working environment.
- Page 5 – tion where the Cordless Drill/Driver may contact hidden wiring.; Contact with; pull the Power Cord around sharp corners or edges.; Do not unplug the Charger; Avoid unintentional starting.; Make sure you are prepared to begin work before; PROPER BATTERy PACK CARE: Battery Pack (19) leakage may occur under; If Battery Pack fluid comes in contact
- Page 6 – GROUNDING; GROUNDED TOOLS: TOOLS WITH THREE PRONG PLUGS; FIGURE A; DOUBLE INSULATED TOOLS: WITH TWO PRONG PLUGS
- Page 7 – preceding illustration.; ExTENSION CORDS; Grounded; RECOMMENDED MINIMUM WIRE GAUGE FOR ExTENSION CORDS*; NAMEPLATE; Chart A
- Page 8 – Lithium Battery Charging Safety; Do not leave unattended while charging.; SyMBOLOGy; UNPACKING
- Page 9 – CHARGING; five to seven hours in order to operate at full power.
- Page 10 – OPERATING INSTRUCTIONS; the; Parts List & Assembly Diagram; Remove the Battery Pack (19) from the tool and set the Rotation; Never insert one of the included Bits (23) directly; Decide on which setting to choose for application:
- Page 12 – inspect the general condition of the Cordless Drill/Driver.; Do not use damaged equipment.; With a soft brush or cloth, remove all dirt and debris from the; this tool must be recycled or disposed of properly.
- Page 14 – PLEASE READ THE FOLLOWING CAREFULLy; LIMITED 90 DAy WARRANTy; which vary from state to state.; Record; individually as replacement parts.
10.8 VOLT CORDLESS DRILL/DRIVER
Model
96299
OPERATING INSTRUCTIONS
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed exclusively by Harbor Freight Tools
®
.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SaVe THiS manual.
Copyright
©
2007 by Harbor Freight Tools
®
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
SKU 96299 For technical questions, please call 1-800-444-3353. PAGE 2 PRODUCT SPECIFICATIONS Power Source 1.3Ah Battery Charge Time 5-7 Hours, after initial charge Charger Input 120V ~60Hz Chuck Type 3/8” Jacobs® Keyless Chuck Torque Settings 23 clutch settings/1 drill setting Variable Speed 0-500 R...
SKU 96299 For technical questions, please call 1-800-444-3353. PAGE 4 Remove the battery from the tool and set the Rotation Button (6) to the cen- 4. ter, locked position, before making any adjustments, changing accessories, or storing the tool. These preventive safety measures reduce the risk of st...
SKU 96299 For technical questions, please call 1-800-444-3353. PAGE 5 Hold the tool by its insulated gripping surfaces when performing an opera- 4. tion where the Cordless Drill/Driver may contact hidden wiring. Contact with a “live” wire will make exposed metal parts of the Cordless Drill/Driver “l...
