Chicago Electric 96299 - Manuals

Page 2 - PRODUCT SPECIFICATIONS; Save This Manual; GENERAL SAFETy RULES; READ AND UNDERSTAND ALL INSTRUCTIONS; Work Area; Keep your work area clean and well lit.; Cluttered benches and dark areas; Keep bystanders and children away while operating a power tool.; Distractions

SKU 96299 For technical questions, please call 1-800-444-3353. PAGE 2 PRODUCT SPECIFICATIONS Power Source 1.3Ah Battery Charge Time 5-7 Hours, after initial charge Charger Input 120V ~60Hz Chuck Type 3/8” Jacobs® Keyless Chuck Torque Settings 23 clutch settings/1 drill setting Variable Speed 0-500 R...

Page 4 - Service; tions in this manual.; SPECIFIC SAFETy RULES; Maintain a safe working environment.

SKU 96299 For technical questions, please call 1-800-444-3353. PAGE 4 Remove the battery from the tool and set the Rotation Button (6) to the cen- 4. ter, locked position, before making any adjustments, changing accessories, or storing the tool. These preventive safety measures reduce the risk of st...

Page 5 - tion where the Cordless Drill/Driver may contact hidden wiring.; Contact with; pull the Power Cord around sharp corners or edges.; Do not unplug the Charger; Avoid unintentional starting.; Make sure you are prepared to begin work before; PROPER BATTERy PACK CARE: Battery Pack (19) leakage may occur under; If Battery Pack fluid comes in contact

SKU 96299 For technical questions, please call 1-800-444-3353. PAGE 5 Hold the tool by its insulated gripping surfaces when performing an opera- 4. tion where the Cordless Drill/Driver may contact hidden wiring. Contact with a “live” wire will make exposed metal parts of the Cordless Drill/Driver “l...

Page 6 - GROUNDING; GROUNDED TOOLS: TOOLS WITH THREE PRONG PLUGS; FIGURE A; DOUBLE INSULATED TOOLS: WITH TWO PRONG PLUGS

SKU 96299 For technical questions, please call 1-800-444-3353. PAGE 6 GROUNDING WARNING! Improperly connecting the grounding wire can result in the risk of electric shock. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power co...

Page 7 - preceding illustration.; ExTENSION CORDS; Grounded; RECOMMENDED MINIMUM WIRE GAUGE FOR ExTENSION CORDS*; NAMEPLATE; Chart A

SKU 96299 For technical questions, please call 1-800-444-3353. PAGE 7 Double insulated tools may be used in either of the 120 volt outlets shown in the 2. preceding illustration. (See Figure B.) ExTENSION CORDS Grounded 1. tools require a three wire extension cord. Double Insulated tools can use eit...

Page 8 - Lithium Battery Charging Safety; Do not leave unattended while charging.; SyMBOLOGy; UNPACKING

SKU 96299 For technical questions, please call 1-800-444-3353. PAGE 8 Lithium Battery Charging Safety Do not leave unattended while charging. 1. Battery charging should be done by adults only. 2. Charge on non-flammable surface and keep away from flammable items. 3. Turn charger off when battery is ...

Page 9 - CHARGING; five to seven hours in order to operate at full power.

SKU 96299 For technical questions, please call 1-800-444-3353. PAGE 9 CHARGING The Battery Pack (19) requires charging before the initial use. The recommended 1. initial charge time is twelve hours, prior to initial use of the Cordless Drill/Driver. Place the Charger on a solid surface such as a gar...

Page 10 - OPERATING INSTRUCTIONS; the; Parts List & Assembly Diagram; Remove the Battery Pack (19) from the tool and set the Rotation; Never insert one of the included Bits (23) directly; Decide on which setting to choose for application:

SKU 96299 For technical questions, please call 1-800-444-3353. PAGE 10 OPERATING INSTRUCTIONS NOTE: For additional information regarding the parts listed in the following pages, refer to the Parts List & Assembly Diagram . WARNING! Remove the Battery Pack (19) from the tool and set the Rotation ...

Page 12 - inspect the general condition of the Cordless Drill/Driver.; Do not use damaged equipment.; With a soft brush or cloth, remove all dirt and debris from the; this tool must be recycled or disposed of properly.

SKU 96299 For technical questions, please call 1-800-444-3353. PAGE 12 Operate the Drill by squeezing the Trigger (12). The speed of the Drill can be con- 14. trolled by varying the pressure on the Trigger. If the clutch starts slipping before the screw is in all the way, stop the drill, put the 15....

Page 14 - PLEASE READ THE FOLLOWING CAREFULLy; LIMITED 90 DAy WARRANTy; which vary from state to state.; Record; individually as replacement parts.

SKU 96299 For technical questions, please call 1-800-444-3353. PAGE 14 PLEASE READ THE FOLLOWING CAREFULLy THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR...