Chicago Electric 95591-.75 HP - Manual
Chicago Electric 95591-.75 HP – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SPECIFICATIOnS; SAVE THIS MAnUAL; gEnERAL SAFETY RULES; WARnIng! Read all instructions; The term “power tool” in all of the warnings listed; SAVE THESE InSTRUCTIOnS; WORK AREA; Keep your work area clean and well lit.; Cluttered benches and dark areas invite
- Page 3 – ELECTRICAL SAFETY; are in doubt as to whether the outlet is properly grounded.; PERSOnAL SAFETY; assembling this product.; TOOL USE And CARE; adjustments, changing accessories, or storing the Sump Pump.
- Page 4 – SERVICE; Service must be performed only by qualified repair personnel.; SPECIFIC SAFETY RULES; wear non-skid rubber boots when water is on the floor and you must
- Page 5 – Make sure to position the Pump on a flat, level, solid surface.; does; have a certified electrician install (within 10 feet of where the
- Page 6 – gROUndIng; Check with a qualified; grounded Tools: Tools with Three; which satisfies OSHA requirements; WARnIng
- Page 7 – Extension Cords; Grounded; Symbology
- Page 8 – UnPACKIng; When unpacking, check to make sure all the parts shown on the; Parts List on; ASSEMBLY And OPERATIng InSTRUCTIOnS; to the; Assembly diagram; Always make sure to turn off the electricity powering the; Any outlet should be well above the water line.
- Page 9 – FIgURE E; Make sure the Discharge
- Page 11 – To clean the Impeller Cover and Impeller:; nine; must only be performed by a qualified service technician.; TROUBLESHOOTIng; Problem
- Page 12 – Part
- Page 13 – ASSEMBLY dIAgRAM; Some parts are listed and shown for illustration purposes only
- Page 14 – LIMITEd 90 dAY WARRAnTY; WARRANTIES OF MERCHANTABILITY AND FITNESS.
VERTICAL FLOAT SUMP PUMP
Model
Model
Model
95591 - .75 HP
95592 - 1 HP
95593 - 1.5 HP
SET UP And OPERATIng InSTRUCTIOnS
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
distributed exclusively by Harbor Freight Tools
®
.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MAnUAL.
Copyright
©
2006 by Harbor Freight Tools
®
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
Cover revised 07l
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
SKU 95591/95592/95593 For technical questions, please call 1-800-444-3353 PAGE 2 SPECIFICATIOnS Model 95591 Model 95592 Model 95593 Motor 115 V~ / 60 Hz / 4 A / 3/4 HP 115 V~ / 60 Hz / 5.5 A / 1 HP 115 V~ / 60 Hz / 6 A / 1.5 HP Power Switch Type Automatic Float Switch Power Plug Type 3-Prong / Groun...
SKU 95591/95592/95593 For technical questions, please call 1-800-444-3353 PAGE 3 ELECTRICAL SAFETY grounded tools must be plugged into a gFCI (ground Fault Circuit Interrupt- 1. er) outlet, properly installed, and grounded in accordance with all codes and ordinances. never remove the grounding prong...
SKU 95591/95592/95593 For technical questions, please call 1-800-444-3353 PAGE 4 Store idle equipment out of reach of children and other untrained persons. 2. Electrically-powered products are dangerous in the hands of untrained users. Check for misalignment or binding of moving parts, breakage of p...
