Chicago Electric 95591-.75 HP - Manuals

Page 2 - SPECIFICATIOnS; SAVE THIS MAnUAL; gEnERAL SAFETY RULES; WARnIng! Read all instructions; The term “power tool” in all of the warnings listed; SAVE THESE InSTRUCTIOnS; WORK AREA; Keep your work area clean and well lit.; Cluttered benches and dark areas invite

SKU 95591/95592/95593 For technical questions, please call 1-800-444-3353 PAGE 2 SPECIFICATIOnS Model 95591 Model 95592 Model 95593 Motor 115 V~ / 60 Hz / 4 A / 3/4 HP 115 V~ / 60 Hz / 5.5 A / 1 HP 115 V~ / 60 Hz / 6 A / 1.5 HP Power Switch Type Automatic Float Switch Power Plug Type 3-Prong / Groun...

Page 3 - ELECTRICAL SAFETY; are in doubt as to whether the outlet is properly grounded.; PERSOnAL SAFETY; assembling this product.; TOOL USE And CARE; adjustments, changing accessories, or storing the Sump Pump.

SKU 95591/95592/95593 For technical questions, please call 1-800-444-3353 PAGE 3 ELECTRICAL SAFETY grounded tools must be plugged into a gFCI (ground Fault Circuit Interrupt- 1. er) outlet, properly installed, and grounded in accordance with all codes and ordinances. never remove the grounding prong...

Page 4 - SERVICE; Service must be performed only by qualified repair personnel.; SPECIFIC SAFETY RULES; wear non-skid rubber boots when water is on the floor and you must

SKU 95591/95592/95593 For technical questions, please call 1-800-444-3353 PAGE 4 Store idle equipment out of reach of children and other untrained persons. 2. Electrically-powered products are dangerous in the hands of untrained users. Check for misalignment or binding of moving parts, breakage of p...

Page 5 - Make sure to position the Pump on a flat, level, solid surface.; does; have a certified electrician install (within 10 feet of where the

SKU 95591/95592/95593 For technical questions, please call 1-800-444-3353 PAGE 5 This Pump is designed to move clean or dirty water only. Do not pump water hotter than 95 degrees Fahrenheit. Make sure the discharge pipe 7. (not included) is secured to a solid surface to ensure the stability of the P...

Page 6 - gROUndIng; Check with a qualified; grounded Tools: Tools with Three; which satisfies OSHA requirements; WARnIng

SKU 95591/95592/95593 For technical questions, please call 1-800-444-3353 PAGE 6 gROUndIng TO PREVEnT ELECTRIC SHOCK And dEATH FROM InCORRECT gROUndIng WIRE COnnECTIOn: Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. do not modify the power cord ...

Page 7 - Extension Cords; Grounded; Symbology

SKU 95591/95592/95593 For technical questions, please call 1-800-444-3353 PAGE 7 Double insulated tools may be used 2. in either of the 120 volt outlets shown in the preceding illustration. (See Outlets for 2-Prong Plug.) Extension Cords Grounded 1. tools require a three wire extension cord. Double ...

Page 8 - UnPACKIng; When unpacking, check to make sure all the parts shown on the; Parts List on; ASSEMBLY And OPERATIng InSTRUCTIOnS; to the; Assembly diagram; Always make sure to turn off the electricity powering the; Any outlet should be well above the water line.

SKU 95591/95592/95593 For technical questions, please call 1-800-444-3353 PAGE 8 UnPACKIng When unpacking, check to make sure all the parts shown on the Parts List on page 12 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this m...

Page 9 - FIgURE E; Make sure the Discharge

SKU 95591/95592/95593 For technical questions, please call 1-800-444-3353 PAGE 9 TO 115 VOLT, gROUndEd gFCI OUTLET 1/8” AIR BLEEd HOLE BASE (25) dISCHARgE PIPE (nOT InCLUdEd) CHECK VALVE OR UnIOn (nOT InCLUdEd) FIgURE E o 1-1/4” OR 1-1/2” n PT PVC 3. Connect the Discharge Pipe to the Base (25). nOTE...

Page 11 - To clean the Impeller Cover and Impeller:; nine; must only be performed by a qualified service technician.; TROUBLESHOOTIng; Problem

SKU 95591/95592/95593 For technical questions, please call 1-800-444-3353 PAGE 11 To clean the Impeller Cover and Impeller: 2. A clogged or dirty Impeller Cover or Impeller (28) will greatly reduce performance of the Pump. To clean the Impel- ler Cover (31), spray the Cover with clean water. To clea...

Page 12 - Part

SKU 95591/95592/95593 For technical questions, please call 1-800-444-3353 PAGE 12 PLEASE REAd THE FOLLOWIng CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRES...

Page 13 - ASSEMBLY dIAgRAM; Some parts are listed and shown for illustration purposes only

SKU 95591/95592/95593 For technical questions, please call 1-800-444-3353 PAGE 13 ASSEMBLY dIAgRAM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 31 Power Cord/Plug not shown. n ote: Some parts are listed and shown for illustration purposes only , and are not ava...

Page 14 - LIMITEd 90 dAY WARRAnTY; WARRANTIES OF MERCHANTABILITY AND FITNESS.

SKU 95591/95592/95593 For technical questions, please call 1-800-444-3353 PAGE 14 LIMITEd 90 dAY WARRAnTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this prod- uct is free from defect...