Chicago Electric 95283 - Manual
Chicago Electric 95283 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – WORK AREA
- Page 3 – sparks which may ignite the dust or fumes.
- Page 4 – SPECIFIC SAFETY RULES AND PRECAUTIONS; IMPORTANT! Your Warranty is voided if:
- Page 5 – KICKBACK PRECAUTIONS
- Page 6 – ELECTRICAL PRECAUTIONS; NEVER use the Polesaw/Pruner in damp or wet conditions.; CARBON MONIXIDE PRECAUTIONS; Keep the Polesaw/Pruner and surrounding areas clean at all times.
- Page 7 – Use only Engine manufacturer recommended fuel and oil.; MECHANICAL PRECAUTIONS
- Page 8 – around the Polesaw/Pruner when it is running.; UNPACKING; FIGURE A
- Page 9 – PRODUCT FEATURES; FIGURE B
- Page 10 – until sag does not exist. Then, retighten the; “Pre-Start Instructions” section of this; when cold, must be primed with fuel prior to
- Page 11 – “Pre-Start Instructions” section in this manual for; position. When starting a; “Pre-Start Instructions” section in this manual for full details on; PRE-START INSTRUCTIONS; To Fill The Chain Oil Tank:
- Page 12 – To Fill The Fuel Tank:; OPERATING INSTRUCTIONS
- Page 16 – FIGURE C
- Page 18 – D e scription
- Page 21 – ASSEMBLY DIAGRAM -ENGINE
- Page 22 – Emission Control System Warranty
- Page 23 – WARRANTY; LIMITED
©
TO PREVENT SERIOUS INJURY,
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
Do to continuing improvements, actual product may differ slightly from the product described herein.
You do not operate the Polesaw/Pruner with the proper 50:1 fuel mix in its fuel tank.
Never run the Engine with an improper fuel mix, low or no fuel mix.
Running the Engine with an improper fuel mix, low or no fuel mix, will permanently damage the unit.
CAUTION!
Your Warranty Is Voided If:
®
Copyright
2006 by Harbor Freight Tools
®
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions, please call 1-800-444-3353.
GAS POWERED
POLESAW/PRUNER
1 HP
Model 95283
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at: http://www.harborfreight.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
PRODUCT SPECIFICATIONS SAVE THIS MANUAL You will need this manual for the safety warnings and precautions, assembly, operating,inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keepyour invoice with this manual. Write the invoice number on the inside of the front cove...
PERSONAL SAFETY 1. Stay alert. Watch what you are doing, and use common sense whenoperating a power tool. Do not use a power tool while tired or under theinfluence of drugs, alcohol, or medication. A moment of inattention whileoperating power tools may result in serious personal injury. 2. Dress pro...
any other condition that may affect the tool’s operation. If damaged, havethe tool serviced before using. Many accidents are caused by poorlymaintained tools. SKU 95283 For technical questions, please call 1-800-444-3353 PAGE 4 6. Use only accessories that are recommended by the manufacturer for you...
