Chicago Electric 94362 - Manual
Chicago Electric 94362 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Cluttered benches and dark areas
- Page 5 – SERVICE; Service; “Inspection, Maintenance, And Cleaning” section of this; may create a risk of electric shock or injury.; GROUNDING; outlet installed by a qualified electrician.
- Page 7 – EXTENSION CORDS; Grounded; tools require a three wire extension cord.; Double Insulated; tools; RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS*; FIGURE C
- Page 8 – SYMBOLOGY; SPECIFIC SAFETY RULES
- Page 12 – Sparking Hazard.; Some metal cutting will create sparks. Do not; UNPACKING; People with pacemakers should consult their physician(s) before; Parts Lists on pages 20
- Page 13 – ASSEMBLY INSTRUCTIONS
- Page 15 – Remove the; FIGURE H; FIGURE G
- Page 16 – FIGURE I; Replace the
- Page 17 – gradually into the workpiece.; Proper Operation During The Cutting Process:; Never pass hands and fingers directly in front of, to the rear, or
- Page 18 – Inspect the general condition of the Saw. Check for; Do not use damaged equipment.; INSPECTION AND MAINTENANCE; Always unplug the Saw from its electrical outlet before; The Saw Blade (10) must be sharp and clean to perform properly.; To Install A Saw Blade”; With a vacuum or compressed air, remove all metal debris from the; FIGURE J
- Page 19 – both Carbon Brushes immediately with approved; FIGURE K
- Page 20 – PARTS LIST; Description
- Page 21 – PLEASE READ THE FOLLOWING CAREFULLY
- Page 22 – ASSEMBLY DIAGRAM; LIMITED 90 DAY WARRANTY
7-1/4” METAL CUTTING SAW
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at: http://www.harborfreight.com
Copyright
©
2006 by Harbor Freight Tools
®
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions, please call 1-800-444-3353.
®
Due to continuing improvements, actual product may differ slightly from the product described herein.
94362
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 SKU 94362 For technical questions, please call 1-800-444-3353. PRODUCT SPECIFICATIONS SAVE THIS MANUAL You will need this manual for the safety warnings and precautions, assembly, operating,inspection, maintenance and cleaning procedures, parts list and assembly diagram.Keep your invoice with...
Page 5 SKU 94362 For technical questions, please call 1-800-444-3353. 22. Check for misalignment or binding of moving parts, breakage of parts, andany other condition that may affect the tool’s operation. If damaged, havethe tool serviced before using. Many accidents are caused by poorly maintained ...
Page 7 SKU 94362 For technical questions, please call 1-800-444-3353. EXTENSION CORDS 1. Grounded tools require a three wire extension cord. Double Insulated tools can use either a two or three wire extension cord. 2. As the distance from the supply outlet increases, you must use a heavier gaugeexte...
