Chicago Electric 90300 - Manual
Chicago Electric 90300 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – PRODUCT SPECIFICATIONS; Item; This product requires oil and fuel to be added before starting.; Fill the engine with the following:; Gal. of unleaded gasoline with no oil added; SAVE THIS MANUAL
- Page 3 – GENERAL SAFETY RULES; READ AND UNDERSTAND ALL INSTRUCTIONS; WORK AREA; Keep your work area clean and well lit.
- Page 6 – SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS
- Page 7 – Installation Precautions:
- Page 8 – Fire And Explosion Precautions:; Keep the Generator and surrounding area clean at all times.; Mechanical Precautions:
- Page 9 – Chemical Precautions:
- Page 10 – Electrical Precautions:; If an extension cord (not included) is used, make sure to use only UL; FIGURE A; REQUIRED MINIMUM EXTENSION CORD GAUGE – 120/ 240 VOLT
- Page 11 – INSTALLATION; The Generator weighs 155 pounds. Use care and the proper lifting
- Page 13 – OPERATING INSTRUCTIONS; Assembly Diagram; FIGURE C
- Page 14 – FIGURE D; FIGURE E
- Page 15 – FIGURE F
- Page 16 – Powering Tools And Equipment:; The Generator features; FIGURE I; position, and remove the Ignition Key from the Ignition Switch
- Page 17 – Always turn off the Engine and remove the Ignition Key. Allow; inspect the general condition of the Generator. Check for; Do not use damaged equipment.; check to make sure the Engine’s oil level is adequate. Refer; PLEASE READ THE FOLLOWING CAREFULLY
GENERATOR
9 HP ROBIN
®
ELECTRIC START
Model 90300
OPERATING INSTRUCTIONS
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at: http://www.harborfreight.com
Copyright
©
2003 by Harbor Freight Tools
®
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions, please call 1-800-444-3353.
Generators
Generators
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
SKU 90300 For technical questions, please call 1-800-444-3353. PAGE 2 PRODUCT SPECIFICATIONS Item Description Electrical Requirements 5400 Watt Surge Power 5 Min. Output @ 4400 Watts / Continuous Running Output 3600 Watts 15 AMPs @ 120V / 15 AMPs @ 240V 60 Hz Output 120V Dual Outlet: 15 AMP, 3 Prong...
SKU 90300 For technical questions, please call 1-800-444-3353. PAGE 3 GENERAL SAFETY RULES WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury. SAVE THESE INSTRUCTIONS WORK AREA 1. Keep your work area...
SKU 90300 For technical questions, please call 1-800-444-3353. PAGE 6 2. Use eye and hearing protection. Wear ANSI approved safety impact eye goggles and hearing protection when using this product. ANSI approved safety impact eyegoggles and hearing protectors are available from Harbor Freight Tools....
