Chicago Electric 45338 - Manual
Chicago Electric 45338 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SAVE tHIS MANuAL; IMPORtANt SAFEtY; general Power tool Safety; Failure to follow the warnings and; the presence of flammable liquids,; sparks which may ignite the dust or
- Page 3 – or under the influence of drugs,
- Page 4 – a qualified repair person using; This will ensure that the safety of the; Drill and Impact Drill Safety
- Page 5 – Vibration Safety
- Page 6 – hands and fingers, increasing the risk; SAVE tHESE; gROuNDINg; Check with a qualified; grounded tools: tools with three
- Page 7 – which satisfies OSHA requirements; Extension Cords; Grounded
- Page 8 – Symbology
- Page 9 – SPECIFICAtIONS; uNPACKINg; Assembly; OPERAtINg INStRuCtIONS
- Page 10 – Plug the Line Cord into an electrical; Right position
- Page 11 – On Locking Button to keep the drill
- Page 12 – Procedures not specifically; Lubrication; es must be completed by a qualified; be replaced only by a qualified
- Page 13 – PARtS LISt; Part; PLEASE READ tHE FOLLOWINg CAREFuLLY
- Page 14 – able individually as replacement parts.; ASSEMBLY DIAgRAM
- Page 15 – LIMItED 90 DAY WARRANtY; WARRANTIES OF MERCHANTABILITY AND FITNESS.
HAMMER DRILL - 1/2 INCH
VARIABLE SPEED - REVERSIBLE
45338
SEt uP AND OPERAtINg INStRuCtIONS
Distributed exclusively by Harbor Freight tools
®
.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE tHIS MANuAL.
Copyright
©
2003 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Manual revised 08l
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
SKU 45338 For technical questions, please call 1-800-444-3353. Page 2 SAVE tHIS MANuAL Keep this manual for the safety warn- ings and precautions, assembly, operat- ing, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly dia...
SKU 45338 For technical questions, please call 1-800-444-3353. Page 3 plugs with grounded power tools. Unmodified plugs and matching out - lets will reduce risk of electric shock. Avoid body contact with grounded b. surfaces such as pipes, radiators, ranges and refrigerators. There is an increased r...
SKU 45338 For technical questions, please call 1-800-444-3353. Page 4 proved for the specific hazards in the work area. Power tool use and care 4. Do not force the power tool. use a. the correct power tool for your ap- plication. The correct power tool will do the job better and safer at the rate fo...
