Chicago Electric 45338 - Manuals

Page 2 - SAVE tHIS MANuAL; IMPORtANt SAFEtY; general Power tool Safety; Failure to follow the warnings and; the presence of flammable liquids,; sparks which may ignite the dust or

SKU 45338 For technical questions, please call 1-800-444-3353. Page 2 SAVE tHIS MANuAL Keep this manual for the safety warn- ings and precautions, assembly, operat- ing, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly dia...

Page 3 - or under the influence of drugs,

SKU 45338 For technical questions, please call 1-800-444-3353. Page 3 plugs with grounded power tools. Unmodified plugs and matching out - lets will reduce risk of electric shock. Avoid body contact with grounded b. surfaces such as pipes, radiators, ranges and refrigerators. There is an increased r...

Page 4 - a qualified repair person using; This will ensure that the safety of the; Drill and Impact Drill Safety

SKU 45338 For technical questions, please call 1-800-444-3353. Page 4 proved for the specific hazards in the work area. Power tool use and care 4. Do not force the power tool. use a. the correct power tool for your ap- plication. The correct power tool will do the job better and safer at the rate fo...

Page 5 - Vibration Safety

SKU 45338 For technical questions, please call 1-800-444-3353. Page 5 parts can grab the surface and pull the tool out of your control.When using a handheld power tool, 7. maintain a firm grip on the tool with both hands to resist starting torque.Do not leave the tool unattended 8. when it is plugge...

Page 6 - hands and fingers, increasing the risk; SAVE tHESE; gROuNDINg; Check with a qualified; grounded tools: tools with three

SKU 45338 For technical questions, please call 1-800-444-3353. Page 6 who have impaired blood circulation to the hand, past hand injuries, ner- vous system disorders, diabetes, or Raynaud’s Disease should not use this tool. If you feel any symptoms related to vibration (such as tingling, numbness, a...

Page 7 - which satisfies OSHA requirements; Extension Cords; Grounded

SKU 45338 For technical questions, please call 1-800-444-3353. Page 7 of electric shock. (See 3-Prong Plug and Outlet.) The grounding prong in the plug is 2. connected through the green wire in- side the cord to the grounding system in the tool. The green wire in the cord must be the only wire conne...

Page 8 - Symbology

SKU 45338 For technical questions, please call 1-800-444-3353. Page 8 dition. Always replace a damaged extension cord or have it repaired by a qualified electrician before using it. Protect the extension cords from 8. sharp objects, excessive heat, and damp or wet areas. RECOMMENDED MINIMuM WIRE gAu...

Page 9 - SPECIFICAtIONS; uNPACKINg; Assembly; OPERAtINg INStRuCtIONS

SKU 45338 For technical questions, please call 1-800-444-3353. Page 9 SPECIFICAtIONS Electrical Requirements 120 V~ / 60 Hz / 6.3 A Motor No Load Speed 0-2800 RPM Chuck Capacity 3/64 to 1/2”, plus key chuck Chuck Thread 1/2" - 20 UNF E194601 uNPACKINg When unpacking, make sure that the item is i...

Page 10 - Plug the Line Cord into an electrical; Right position

SKU 45338 For technical questions, please call 1-800-444-3353. Page 10 tool Set up tO PREVENt SERIOuS INjuRY FROM ACCIDENtAL OPERAtION: turn the Power Switch of the tool to its “OFF” position and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning pr...

Page 11 - On Locking Button to keep the drill

SKU 45338 For technical questions, please call 1-800-444-3353. Page 11 Gear Setting Control Figure F (top view) 6. On the top of the Hammer Drill, push the Gear Setting Control to select plain drilling or hammer drilling. A symbol for a drill bit indicates plain drilling is selected. If a hammer is ...

Page 12 - Procedures not specifically; Lubrication; es must be completed by a qualified; be replaced only by a qualified

SKU 45338 For technical questions, please call 1-800-444-3353. Page 12 MAINtENANCE AND SERVICINg Procedures not specifically explained in this manual must be performed only by a qualified technician. tO PREVENt SERIOuS INjuRY FROM ACCIDENtAL OPERAtION: turn the Power Switch of the tool to its “OFF” ...

Page 13 - PARtS LISt; Part; PLEASE READ tHE FOLLOWINg CAREFuLLY

SKU 45338 For technical questions, please call 1-800-444-3353. Page 13 PARtS LISt Part Description Qty. 1 Screw, M6x25 1 2 Chuck 1 3 Chuck Key 1 4 Spindle 1 5 Steel Ball, 3 1 6 Circle Seal 1 7 Ball Bearing 1 8 Spring 1 9 Gear, Large 1 10 Needle Bearing, HK1207 1 11 Ratchet 1 12 Bearing Holder 1 13 W...

Page 14 - able individually as replacement parts.; ASSEMBLY DIAgRAM

SKU 45338 For technical questions, please call 1-800-444-3353. Page 14 Record Product’s Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not avail- able individually as ...

Page 15 - LIMItED 90 DAY WARRANtY; WARRANTIES OF MERCHANTABILITY AND FITNESS.

SKU 45338 For technical questions, please call 1-800-444-3353. Page 15 LIMItED 90 DAY WARRANtY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this prod- uct is free from defects in materi...