Chicago Electric 41213 - Manual
Chicago Electric 41213 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – saVE this ManUal; iMPortant saFEtY inForMation; dangEr; Notice
- Page 3 – gEnEral saFEtY rUlEs
- Page 4 – Power tool use and care; disconnect the plug from the power source of the power tool before
- Page 5 – service; Vibration hazard; Maintain labels and nameplates on the tool
- Page 7 – saVE thEsE instrUctions.
- Page 8 – groUnding; Check with a qualified electrician if you are in doubt as to; grounded tools: tools with three Prong Plugs; double insulated tools: tools with two Prong Plugs; Warning
- Page 9 – Extension cords
- Page 10 – symbology
- Page 11 – sPEciFications; UnPacKing; list of contents; sEt UP instrUctions; assembly
- Page 12 – Figure 1
- Page 13 – iMPortant; harbor Freight tools cannot be held responsible for damage; harbor Freight tools; oPErating instrUctions
- Page 15 – sanding
- Page 16 – MaintEnancE and sErVicing; replaced only by a qualified service technician.; troubleshooting
- Page 17 – Parts list
- Page 18 – assEMblY diagraM
- Page 19 – liMitEd 90 daY WarrantY; PlEasE rEad thE FolloWing carEFUllY
7” ElEctric
PolishEr / sandEr
Model
41213
sEt UP and oPErating instrUctions
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
distributed exclusively by harbor Freight tools
®
.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
read this material before using this product.
Failure to do so can result in serious injury.
saVE this ManUal.
Copyright
©
2007 by Harbor Freight Tools
®
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 SKU 41213 For technical questions, please call 1-800-444-3353. saVE this ManUal Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram...
Page 3 SKU 41213 For technical questions, please call 1-800-444-3353. gEnEral saFEtY rUlEs Warning! read all instructions Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury. The term “power tool” in all of the warnings listed below refers to you...
Page 4 SKU 41213 For technical questions, please call 1-800-444-3353. Avoid accidental starting. Ensure the switch is in the off-position before plug- ging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents. Remove any adjusti...
