Chicago Electric 3663 - Manual
Chicago Electric 3663 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SpEciFicAtiONS; Grinder not included.; Save this Manual; SAFEty WARNiNgS AND pREcAutiONS
- Page 3 – inhalation Hazard; Welding/plasma cutting produces tOxic FuMES and gASSES.; Exposure to welding or cutting gasses can increase the risk of; wearing an ANSi approved respirator, are ESSENtiAL to reduce the
- Page 4 – use proper size and type extension cord; AWg; Maintenance; uNpAcKiNg; FiguRE 1
- Page 5 – OpERAtiON; Saw blade preparation; Welding; FiguRE 3
- Page 6 – FiguRE 4
- Page 7 – test the repaired saw blade.; FiguRE 7
- Page 8 – MAiNtENANcE; Wiring Diagram
- Page 9 – FRONt pANEL pARtS LiSt AND DiAgRAM; pLEASE READ tHE FOLLOWiNg cAREFuLLy
- Page 10 – pARtS LiSt; part
- Page 11 – ASSEMBLy DRAWiNg
- Page 12 – LiMitED 1 yEAR / 90 DAy WARRANty; this
BANDSAW BLADE WELDER
Model
3663
SEt up AND OpERAtiNg iNStRuctiONS
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed exclusively by Harbor Freight tools
®
.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE tHiS MANuAL.
Copyright
©
2003 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or
any artwork contained herein may be reproduced in any shape or form without the express
written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
Revised 03d, 07k
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 SKU 3663 For technical questions, please call 1-800-444-3353. SpEciFicAtiONS Power Requirements 220 V~, 1-Phase, 60 Hz, 6 A ( Only use on a 20 amp circuit) Welding Current 280 A Welding Blade Sizes 1/8” to 1/2” Maximum Jaw Movement .137” Note: Grinder not included. Note: Performance of this t...
Page 3 SKU 3663 For technical questions, please call 1-800-444-3353. inhalation Hazard Welding/plasma cutting produces tOxic FuMES and gASSES. Exposure to welding or cutting gasses can increase the risk of developing certain cancers, such as cancer of the larynx and lung cancer. Also, some diseases ...
Page 4 SKU 3663 For technical questions, please call 1-800-444-3353. REV 04e, 04f, 07k use proper size and type extension cord 17. . If an extension cord is required, it must be of the proper size and type to supply the correct current to the tool without heating up. Otherwise, the extension cord co...
