Transition Networks SCSCF30XX-10X - Manuals

Transition Networks SCSCF30XX-10X – Manual in PDF format online.

Manuals:

Manual Transition Networks SCSCF30XX-10X

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7

Summary

Page 2 - Set the Loop-Back Switch; Installation; Set the Configuration Switches

2 SCSCF30xx-10x 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Part Number Port One - Copper Port Two - Single Fiber Optic SCSCF3029-102 and -103 are intended to be installed in the same network whereone is the local converter and the other is the remote converter. *Ty...

Page 3 - Set the Coax Grounding Jumpers; (located on the circuit board near the coax ports); Install the Coax Cable

4 SCSCF30xx-10x 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Installation -- Continued CAUTION: Wear a grounding device and observe electrostatic discharge precautionswhen setting the jumper. Failure to observe this caution could result in damage to, andsubsequent fa...

Page 4 - Power the Device; AC; Cable Specifications; Coax Cable; Peak pulse power in DBm; Fiber Cable

SCSCF30xx-10x 6 Operation After installation, the Device should function without operator intervention. Use thestatus LEDs to monitor the Device operation in the network. SDC Green on The coax link is up. Green flashing The coax link is in loop-back mode. Yellow on AIS (Alarm Indication Signal) on t...

Transition Networks Manuals