Transition Networks CETTF10XX-105 - Manuals

Transition Networks CETTF10XX-105 – Manual in PDF format online.

Manuals:

Manual Transition Networks CETTF10XX-105

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7

Summary

Page 2 - Failure to observe this caution could result in; Set the 4-Position Switch; Hardware; Installation; Failure to observe this caution could result in damage to, and; Connect the Twisted-Pair Copper Cable

Installation CAUTION: Wear a grounding device and observe electrostatic discharge precautions when setting the 4-position switch and the jumper and wheninstalling the media converter. Failure to observe this caution could result in damage to, and subsequent failure of, the media converter. Set the 4...

Page 3 - Connect the fber cable; PointSystemTM; Operation; Status LEDs; PWR; SNMP; FocalPointTM

CETTF10xx-105 4 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Installation -- Continued Connect the fber cable 1. Locate or build IEEE 803.2 ™ compliant 10Base-FL fiber cable with male, two-stranded TX to RX connectors installed at both ends. 2. Connect the fiber cabl...

Page 4 - Product Features; AutoCross; Factory default is “enable AutoCross.” Transition networks; Link Pass Through; Cable Specifications; Fiber Cable

CETTF10xx-105 6 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Operation -- Continued Product Features AutoCross ™ When the AutoCross feature is activated, it allows either straight-through(MDI) or crossover (MDI-X) copper cables to be used when connecting to10Base-T d...

Transition Networks Manuals