Smart 8084i-G4-SMP - Manuals

Chapter 1 1 smarttech.com/kb/170446 Chapter 1: Welcome About your interactive flat panel 2 Features 2 Touch-enabled interactivity 2 Gesture support 2 Dual user support 2 Presence detection 2 Audio 3 SMART software 3 Components 4 Screen 4 Cameras and reflective tape channel 5 Presence detection senso...

C H A P T E R 1 Welcome 2 smarttech.com/kb/170446 About your interactive flat panel Your SMART Board interactive flat panel features SMART’s proprietary DViT® (Digital Vision Touch) technology on an LCD screen with e-LED backlight which enables you to select, write and erase on the interactive surfa...

C H A P T E R 1 Welcome 4 smarttech.com/kb/170446 Components Your interactive flat panel consists of the following components: No. Name 1 Screen 2 Cameras and reflective tape channel 3 Presence detection sensor (×2) 4 Speakers 5 Pen (×2) 6 Eraser 7 Color select module 8 Front control panel 9 Remote ...

C H A P T E R 1 Welcome 8 smarttech.com/kb/170446 Remote control The remote control enables you to turn on and turn off your interactive flat panel, change the input source, adjust the volume, access the on-screen menu and more. For more information on the remote control, see Using the remote contro...

C H A P T E R 1 Welcome 9 smarttech.com/kb/170446 Item 8070i-G4-SMP 8084i-G4-SMP Video and audiooutputs VGA DVI-D Stereo 3.5 mm (×3) Stereo 3.5 mm (×4) Dual RCA audio Speaker wire connector Speaker wire connector Guide icons N O T E S l Other, minor differences between models are noted throughout th...

C H A P T E R 1 Welcome 10 smarttech.com/kb/170446 Other documentation and resources In addition to this guide, there are resources for individuals who install, maintain and use interactive flat panels. Specifications Your interactive flat panel’s specifications define the product’s dimensions, weig...

C H A P T E R 1 Welcome 11 smarttech.com/kb/170446 Help SMART software includes extensive Help which explains how to use both your interactive flat panel and the software. To view SMART software Help on your interactive flat panel 1. Press the Help button on the color select module. The Help and Sup...

Chapter 2 13 smarttech.com/kb/170446 Chapter 2: Mounting your interactiveflat panel Before mounting your interactive flat panel 13 Choosing a location 15 Choosing a height 15 You can either mount your interactive flat panel on a wall, as documented in this chapter, or install it on a stand as docume...

C H A P T E R 2 Mounting your interactive flat panel 15 smarttech.com/kb/170446 l Use M8 screws to fasten the wall bracket. The screws must be 14–15 mm long plus the thickness of the bracket and the washer. N O T E The recommended fasten force is 99.57–121.70 in-lb. (11.25–13.75 N·m). l Because the ...

Chapter 3 17 smarttech.com/kb/170446 Chapter 3: Connecting power and devices Connector panels 18 SMART Board 8070i-G4-SMP interactive flat panel connector panels 18 SMART Board8084i-G4-SMP interactive flat panel connector panels 20 Connecting power 21 Connecting the room computer 22 Connecting cable...

C H A P T E R 3 Connecting power and devices 18 smarttech.com/kb/170446 Connector panels There are connector panels on the top, left, right and bottom of your interactive flat panel as well as on the I/O extension module. SMART Board 8070i-G4-SMP interactive flat panel connector panels The following...

C H A P T E R 3 Connecting power and devices 20 smarttech.com/kb/170446 SMART Board8084i-G4-SMP interactive flat panel connector panels The following diagram and table present the connectors on SMART Board 8084i-G4-SMP interactive flat panels: No. Type Details Identifier Top connector panel 1 USB US...

C H A P T E R 3 Connecting power and devices 21 smarttech.com/kb/170446 No. Type Details Identifier 13 Audio out Speaker wire connectors 14 Room control in RS-232 connector 15 Room control out /pass-through RS-232 connector 16 Video in DisplayPort connector DPORT 17 Video in HDMI connector HDMI2 18 ...

C H A P T E R 3 Connecting power and devices 22 smarttech.com/kb/170446 Connecting the room computer Using the supplied USB and HDMI cables, connect the room computer to the USB1 receptacle and the HDMI3/PC connector on the I/O extension module, which is located on the back of your interactive flat ...

C H A P T E R 3 Connecting power and devices 24 smarttech.com/kb/170446 Connecting external speakers Your interactive flat panel includes two 10 W speakers below the screen. You can connect external speakers using the stereo 3.5 mm connectors on either side of the interactive flat panel. Alternative...

Chapter 4 27 smarttech.com/kb/170446 Chapter 4: Setting up your interactiveflat panel and room computer Turning on your interactive flat panel and room computer for the first time 27 Installing SMART software 28 Downloading and installing SMART software 28 Deploying SMART software to multiple comput...

C H A P T E R 4 Setting up your interactive flat panel and room computer 28 smarttech.com/kb/170446 Installing SMART software To take full advantage of your interactive flat panel’s features, you must download and install SMART software on your room computer. Downloading and installing SMART softwar...

Chapter 5 29 smarttech.com/kb/170446 Chapter 5: Using your interactive flat panel Turning on and turning off your interactive flat panel 29 Turning on and turning off SMART Board 8070i-G4-SMP interactive flat panels 30 Turning on and turning off SMART Board 8084i-G4-SMP interactive flat panels 31 Us...

C H A P T E R 5 Using your interactive flat panel 32 smarttech.com/kb/170446 N O T E If ECO Standby mode is enabled for SMART Board 8070i-G4-SMP interactive flat panels, presence detection functionality is limited. Presence detection settings can be changed with the on-screen display menu. For more ...

C H A P T E R 5 Using your interactive flat panel 34 smarttech.com/kb/170446 4. Press the Input Select button on the front control panel until the input source is HDMI2. T I P Alternatively, you can press the Input button on the remote control (see Remote control buttons on page 37). To connect a gu...

C H A P T E R 5 Using your interactive flat panel 36 smarttech.com/kb/170446 T I P The remote control for SMART Board 8070i-G4-SMP interactive flat panels has buttons for each input source ( HDMI1 , HDMI2 , HDMI3/PC and so on). Press one of these input source buttons to display the connected device’...

C H A P T E R 5 Using your interactive flat panel 37 smarttech.com/kb/170446 I M P O R T A N T The remote control might not function when the infrared remote control sensor is blocked or when it is in direct sunlight or strong lighting. Remote control buttons The remote control enables you to access...

C H A P T E R 5 Using your interactive flat panel 41 smarttech.com/kb/170446 No. Name Description 4 1/a/A Switch the number pad between number input (1, 2, 3),lowercase letter input (a, b, c) and uppercase letter input(A, B, C) 5 MARK/ARC Set the aspect ratio 6 VOL +/- Increase or decrease audio out...

C H A P T E R 6 Maintaining your interactive flat panel 44 smarttech.com/kb/170446 To open SMART Settings on Windows 8 operating systems 1. Open the Apps screen. 2. Press SMART Settings . SMART Settings appears. Updating software SMART Product Update (SPU) is included in the SMART software you insta...

C H A P T E R 6 Maintaining your interactive flat panel 45 smarttech.com/kb/170446 To update firmware 1. Ensure your interactive flat panel is connected to your computer. 2. Launch the firmware updater at the following location: Operatingsystem Location Windows (32-bit) C:\Program Files\SMART Techno...

C H A P T E R 6 Maintaining your interactive flat panel 46 smarttech.com/kb/170446 5. Press Calibrate . The calibration screen appears. This can take a few moments. 6. Press the red target with the tip of an interactive flat panel pen. Hold the tip at the center of the target until the target turns ...

C H A P T E R 6 Maintaining your interactive flat panel 47 smarttech.com/kb/170446 Replacing batteries in the remote control The remote control requires two 1.5V AAA batteries. W A R N I N G To reduce the risk associated with leaking batteries: l use only AAA type batteries l do not mix used and new...

C H A P T E R 6 Maintaining your interactive flat panel 49 smarttech.com/kb/170446 Cleaning the camera windows and reflective tape The DViT technology in your interactive flat panel uses four cameras in the corners of the frame and the reflective material between the screen and the bezels. Excessive...

C H A P T E R 6 Maintaining your interactive flat panel 50 smarttech.com/kb/170446 Preventing condensation Your interactive flat panel screen contains layers of glass that can collect condensation, especially in the following conditions: l Temperature extremes with high humidity l Rapid changes in h...

C H A P T E R 6 Maintaining your interactive flat panel 51 smarttech.com/kb/170446 I M P O R T A N T Follow the instructions included with the floor stand or mounting apparatus. To remove your interactive flat panel 1. Turn off your interactive flat panel and unplug the power cable from the wall out...

C H A P T E R 7 Troubleshooting your interactive flat panel 54 smarttech.com/kb/170446 Resolving blank screen issues Use the following troubleshooting table when your computer is turned on, but you don’t see an image on the interactive flat panel screen. Begin by looking at the interactive flat pane...

C H A P T E R 7 Troubleshooting your interactive flat panel 55 smarttech.com/kb/170446 Resolving image quality issues Symptom Causes Solution The image is too large, toosmall or doesn’t completelyfill the screen. The computer’s videoresolution settings don’tmatch your interactive flatpanel’s native ...

C H A P T E R 7 Troubleshooting your interactive flat panel 58 smarttech.com/kb/170446 Symptom Causes Solution Other display quality issues Return all on-screen displaymenu settings to their defaultvalues (see page 72 forSMART Board 8070i-G4-SMPinteractive flat panels or page 78for SMART Board 8084i...

C H A P T E R 7 Troubleshooting your interactive flat panel 60 smarttech.com/kb/170446 Symptom Causes Solution You try to erase usingsomething other than theeraser, but you draw moredigital ink. One of the colorselect button lights isflashing. You’re in Locked Ink modeand all objects areinterpreted ...

C H A P T E R 7 Troubleshooting your interactive flat panel 62 smarttech.com/kb/170446 Resolving presence detection issues The sensors for presence detection can detect when people are within 16' (5 m) of the interactive flat panel and automatically turn on or off the interactive flat panel. Symptom...

C H A P T E R 7 Troubleshooting your interactive flat panel 64 smarttech.com/kb/170446 Resolving issues using SMART BoardDiagnostics If you touch the interactive flat panel’s surface and nothing happens, or if there is no digital ink or the ink appears in some locations and not in others, use SMART ...

Appendix A 65 smarttech.com/kb/170446 Appendix A: Using the on-screen displaymenu Changing settings in the on-screen display menu 65 SMART Board 8070i-G4-SMP interactive flat panel on-screen display menu 66 SMART Board 8084i-G4-SMP interactive flat panel on-screen display menu 72 You can access the ...

Appendix B 81 smarttech.com/kb/170446 Appendix B: Remotely managing yourinteractive flat panel Connecting and configuring a room control system 82 Connecting a computer to an interactive flat panel 82 Configuring your computer’s serial interface settings 83 Power modes 83 Room control system program...

A P P E N D I X B Remotely managing your interactive flat panel 82 smarttech.com/kb/170446 Connecting and configuring a room controlsystem Connect a computer to the room control input on the interactive flat panel to remotely select video inputs, turn on or turn off your interactive flat panel and r...

A P P E N D I X B Remotely managing your interactive flat panel 83 smarttech.com/kb/170446 Configuring your computer’s serial interface settings You need to configure your computer’s serial interface before sending commands. To configure your computer’s serial interface 1. Turn on your interactive f...

A P P E N D I X B Remotely managing your interactive flat panel 84 smarttech.com/kb/170446 Room control system programming commandsand responses To access interactive flat panel information or to adjust interactive flat panel settings using the room control system, type commands after the command pr...

A P P E N D I X B Remotely managing your interactive flat panel 85 smarttech.com/kb/170446 Assigning a specific value You can assign a specific value for a setting within the command’s target range. In the example below, the user wants to set the contrast level for the interactive flat panel to 65. ...

A P P E N D I X B Remotely managing your interactive flat panel 86 smarttech.com/kb/170446 Assigning a value for a video control setting Use the set command to assign values for a video control setting. In the example below, the user wants to set the contrast to 70 for the HDMI1 video input. >set...

A P P E N D I X B Remotely managing your interactive flat panel 87 smarttech.com/kb/170446 Source Use the following commands to identify source settings. Command Response Possible values Standbymode get input input= [Value] l VGA1 l VGA2 l DVI l Video l S_Video l DVD/HD l DisplayPort l HDMI1 l HDMI2...

A P P E N D I X B Remotely managing your interactive flat panel 88 smarttech.com/kb/170446 Use the following commands to assign source settings. Command Possible values Response Standbymode set input [Value] l =VGA1 l =VGA2 l =DVI l =Video l =S_Video l =DVD/HD l =DisplayPort l =HDMI1 l =HDMI2 l =HDM...

A P P E N D I X B Remotely managing your interactive flat panel 90 smarttech.com/kb/170446 Command Possible values Response Standbymode set displaymode [Value] l =DYNAMIC l =STANDARD l =sRGB l =CINEMA l =SPORT l =GAME l =USER l =AMBIENT displaymode= [Value] No set saturation [Value] l + [Incremental...

A P P E N D I X B Remotely managing your interactive flat panel 92 smarttech.com/kb/170446 System information Use the following commands to identify system information settings. Command Response Possible values Standbymode get aspectratio aspectratio= [Value] l 1:1 l 16:9 l 4:3 l zoom1 l zoom2 No ge...

A P P E N D I X B Remotely managing your interactive flat panel 106 smarttech.com/kb/170446 Command Possible values Response Standbymode set monitorid [Value] =1–100 monitorid= [Value] No set opsfail [Value] l =on l =off opsfail= [Value] No set proximity [Value] l =on l =off proximity= [Value] No se...

Index 111 smarttech.com/kb/170446 A AAA batteries 47 air conditioning 15, 50 ambient lighting 67, 98 aspect ratio 4, 68, 74, 92, 103 audio about 3 configuring 69, 74, 90, 100 controlling volume 7, 39, 41 muting 7, 39, 41 troubleshooting 60 B backlight 73 balance, audio 69, 75, 90, 102 bass 69, 90 ba...