Page 2 - Product registration
Product registration If you register your SMART product, we’ll notify you of new features and software upgrades. Register online at smarttech.com/registration . Keep the following information available in case you need to contact SMART Support. Serial number: Date of purchase: smarttech.com/kb/17044...
Page 3 - Important information
i smarttech.com/kb/170446 Important information W A R N I N G l Failure to follow the installation instructions shipped with your SMART product could result in personal injury and product damage which may not be covered by your warranty. l Do not open or disassemble the SMART product. You risk elect...
Page 7 - Contents
v smarttech.com/kb/170446 Contents Important information i Chapter 1: Welcome 1 About your interactive flat panel 2 About this guide 9 Other documentation and resources 10 Chapter 2: Mounting your interactive flat panel 13 Before mounting your interactive flat panel 13 Choosing a location 15 Choosin...
Page 9 - Chapter 1; Welcome
Chapter 1 1 smarttech.com/kb/170446 Chapter 1: Welcome About your interactive flat panel 2 Features 2 Touch-enabled interactivity 2 Gesture support 2 Dual user support 2 Presence detection 2 Audio 3 SMART software 3 Components 4 Screen 4 Cameras and reflective tape channel 5 Presence detection senso...
Page 10 - About your interactive flat panel; Features
C H A P T E R 1 Welcome 2 smarttech.com/kb/170446 About your interactive flat panel Your SMART Board interactive flat panel features SMART’s proprietary DViT® (Digital Vision Touch) technology on an LCD screen with e-LED backlight which enables you to select, write and erase on the interactive surfa...
Page 12 - Components
C H A P T E R 1 Welcome 4 smarttech.com/kb/170446 Components Your interactive flat panel consists of the following components: No. Name 1 Screen 2 Cameras and reflective tape channel 3 Presence detection sensor (×2) 4 Speakers 5 Pen (×2) 6 Eraser 7 Color select module 8 Front control panel 9 Remote ...
Page 16 - Differences between models
C H A P T E R 1 Welcome 8 smarttech.com/kb/170446 Remote control The remote control enables you to turn on and turn off your interactive flat panel, change the input source, adjust the volume, access the on-screen menu and more. For more information on the remote control, see Using the remote contro...
Page 17 - About this guide
C H A P T E R 1 Welcome 9 smarttech.com/kb/170446 Item 8070i-G4-SMP 8084i-G4-SMP Video and audiooutputs VGA DVI-D Stereo 3.5 mm (×3) Stereo 3.5 mm (×4) Dual RCA audio Speaker wire connector Speaker wire connector Guide icons N O T E S l Other, minor differences between models are noted throughout th...
Page 18 - Other documentation and resources; Installation instructions; Cabling guides
C H A P T E R 1 Welcome 10 smarttech.com/kb/170446 Other documentation and resources In addition to this guide, there are resources for individuals who install, maintain and use interactive flat panels. Specifications Your interactive flat panel’s specifications define the product’s dimensions, weig...
Page 19 - Help; Training
C H A P T E R 1 Welcome 11 smarttech.com/kb/170446 Help SMART software includes extensive Help which explains how to use both your interactive flat panel and the software. To view SMART software Help on your interactive flat panel 1. Press the Help button on the color select module. The Help and Sup...
Page 21 - Chapter 2; Before mounting your interactive flat panel
Chapter 2 13 smarttech.com/kb/170446 Chapter 2: Mounting your interactiveflat panel Before mounting your interactive flat panel 13 Choosing a location 15 Choosing a height 15 You can either mount your interactive flat panel on a wall, as documented in this chapter, or install it on a stand as docume...
Page 23 - Choosing a location
C H A P T E R 2 Mounting your interactive flat panel 15 smarttech.com/kb/170446 l Use M8 screws to fasten the wall bracket. The screws must be 14–15 mm long plus the thickness of the bracket and the washer. N O T E The recommended fasten force is 99.57–121.70 in-lb. (11.25–13.75 N·m). l Because the ...
Page 25 - Chapter 3; Connecting power and devices
Chapter 3 17 smarttech.com/kb/170446 Chapter 3: Connecting power and devices Connector panels 18 SMART Board 8070i-G4-SMP interactive flat panel connector panels 18 SMART Board8084i-G4-SMP interactive flat panel connector panels 20 Connecting power 21 Connecting the room computer 22 Connecting cable...
Page 26 - SMART Board 8070i-G4-SMP interactive flat panel connector panels
C H A P T E R 3 Connecting power and devices 18 smarttech.com/kb/170446 Connector panels There are connector panels on the top, left, right and bottom of your interactive flat panel as well as on the I/O extension module. SMART Board 8070i-G4-SMP interactive flat panel connector panels The following...
Page 28 - SMART Board8084i-G4-SMP interactive flat panel connector panels
C H A P T E R 3 Connecting power and devices 20 smarttech.com/kb/170446 SMART Board8084i-G4-SMP interactive flat panel connector panels The following diagram and table present the connectors on SMART Board 8084i-G4-SMP interactive flat panels: No. Type Details Identifier Top connector panel 1 USB US...
Page 29 - Connecting power
C H A P T E R 3 Connecting power and devices 21 smarttech.com/kb/170446 No. Type Details Identifier 13 Audio out Speaker wire connectors 14 Room control in RS-232 connector 15 Room control out /pass-through RS-232 connector 16 Video in DisplayPort connector DPORT 17 Video in HDMI connector HDMI2 18 ...
Page 30 - Connecting the room computer; Connecting cables for laptops
C H A P T E R 3 Connecting power and devices 22 smarttech.com/kb/170446 Connecting the room computer Using the supplied USB and HDMI cables, connect the room computer to the USB1 receptacle and the HDMI3/PC connector on the I/O extension module, which is located on the back of your interactive flat ...
Page 32 - Disabling the USB receptacles
C H A P T E R 3 Connecting power and devices 24 smarttech.com/kb/170446 Connecting external speakers Your interactive flat panel includes two 10 W speakers below the screen. You can connect external speakers using the stereo 3.5 mm connectors on either side of the interactive flat panel. Alternative...
Page 35 - Chapter 4
Chapter 4 27 smarttech.com/kb/170446 Chapter 4: Setting up your interactiveflat panel and room computer Turning on your interactive flat panel and room computer for the first time 27 Installing SMART software 28 Downloading and installing SMART software 28 Deploying SMART software to multiple comput...
Page 36 - Installing SMART software; Downloading and installing SMART software; Deploying SMART software to multiple computers
C H A P T E R 4 Setting up your interactive flat panel and room computer 28 smarttech.com/kb/170446 Installing SMART software To take full advantage of your interactive flat panel’s features, you must download and install SMART software on your room computer. Downloading and installing SMART softwar...
Page 37 - Chapter 5; Using your interactive flat panel
Chapter 5 29 smarttech.com/kb/170446 Chapter 5: Using your interactive flat panel Turning on and turning off your interactive flat panel 29 Turning on and turning off SMART Board 8070i-G4-SMP interactive flat panels 30 Turning on and turning off SMART Board 8084i-G4-SMP interactive flat panels 31 Us...
Page 40 - Using SMART software; Using the USB receptacle
C H A P T E R 5 Using your interactive flat panel 32 smarttech.com/kb/170446 N O T E If ECO Standby mode is enabled for SMART Board 8070i-G4-SMP interactive flat panels, presence detection functionality is limited. Presence detection settings can be changed with the on-screen display menu. For more ...
Page 42 - Connecting a guest laptop through a SMART GoWire cable
C H A P T E R 5 Using your interactive flat panel 34 smarttech.com/kb/170446 4. Press the Input Select button on the front control panel until the input source is HDMI2. T I P Alternatively, you can press the Input button on the remote control (see Remote control buttons on page 37). To connect a gu...
Page 44 - Remote control sensor
C H A P T E R 5 Using your interactive flat panel 36 smarttech.com/kb/170446 T I P The remote control for SMART Board 8070i-G4-SMP interactive flat panels has buttons for each input source ( HDMI1 , HDMI2 , HDMI3/PC and so on). Press one of these input source buttons to display the connected device’...
Page 45 - Remote control buttons
C H A P T E R 5 Using your interactive flat panel 37 smarttech.com/kb/170446 I M P O R T A N T The remote control might not function when the infrared remote control sensor is blocked or when it is in direct sunlight or strong lighting. Remote control buttons The remote control enables you to access...
Page 49 - Menu control panel
C H A P T E R 5 Using your interactive flat panel 41 smarttech.com/kb/170446 No. Name Description 4 1/a/A Switch the number pad between number input (1, 2, 3),lowercase letter input (a, b, c) and uppercase letter input(A, B, C) 5 MARK/ARC Set the aspect ratio 6 VOL +/- Increase or decrease audio out...
Page 52 - Updating software; Updating firmware
C H A P T E R 6 Maintaining your interactive flat panel 44 smarttech.com/kb/170446 To open SMART Settings on Windows 8 operating systems 1. Open the Apps screen. 2. Press SMART Settings . SMART Settings appears. Updating software SMART Product Update (SPU) is included in the SMART software you insta...
Page 53 - Calibrating your interactive flat panel
C H A P T E R 6 Maintaining your interactive flat panel 45 smarttech.com/kb/170446 To update firmware 1. Ensure your interactive flat panel is connected to your computer. 2. Launch the firmware updater at the following location: Operatingsystem Location Windows (32-bit) C:\Program Files\SMART Techno...
Page 54 - Orienting your interactive flat panel
C H A P T E R 6 Maintaining your interactive flat panel 46 smarttech.com/kb/170446 5. Press Calibrate . The calibration screen appears. This can take a few moments. 6. Press the red target with the tip of an interactive flat panel pen. Hold the tip at the center of the target until the target turns ...
Page 55 - Replacing batteries in the remote control; Replacing a pen nib
C H A P T E R 6 Maintaining your interactive flat panel 47 smarttech.com/kb/170446 Replacing batteries in the remote control The remote control requires two 1.5V AAA batteries. W A R N I N G To reduce the risk associated with leaking batteries: l use only AAA type batteries l do not mix used and new...
Page 57 - Cleaning the camera windows and reflective tape; Maintaining ventilation
C H A P T E R 6 Maintaining your interactive flat panel 49 smarttech.com/kb/170446 Cleaning the camera windows and reflective tape The DViT technology in your interactive flat panel uses four cameras in the corners of the frame and the reflective material between the screen and the bezels. Excessive...
Page 58 - Preventing condensation; Checking the interactive flat panel installation
C H A P T E R 6 Maintaining your interactive flat panel 50 smarttech.com/kb/170446 Preventing condensation Your interactive flat panel screen contains layers of glass that can collect condensation, especially in the following conditions: l Temperature extremes with high humidity l Rapid changes in h...
Page 59 - Transporting your interactive flat panel
C H A P T E R 6 Maintaining your interactive flat panel 51 smarttech.com/kb/170446 I M P O R T A N T Follow the instructions included with the floor stand or mounting apparatus. To remove your interactive flat panel 1. Turn off your interactive flat panel and unplug the power cable from the wall out...
Page 62 - Resolving blank screen issues
C H A P T E R 7 Troubleshooting your interactive flat panel 54 smarttech.com/kb/170446 Resolving blank screen issues Use the following troubleshooting table when your computer is turned on, but you don’t see an image on the interactive flat panel screen. Begin by looking at the interactive flat pane...
Page 63 - Resolving image quality issues
C H A P T E R 7 Troubleshooting your interactive flat panel 55 smarttech.com/kb/170446 Resolving image quality issues Symptom Causes Solution The image is too large, toosmall or doesn’t completelyfill the screen. The computer’s videoresolution settings don’tmatch your interactive flatpanel’s native ...
Page 66 - Resolving touch control and digital ink issues
C H A P T E R 7 Troubleshooting your interactive flat panel 58 smarttech.com/kb/170446 Symptom Causes Solution Other display quality issues Return all on-screen displaymenu settings to their defaultvalues (see page 72 forSMART Board 8070i-G4-SMPinteractive flat panels or page 78for SMART Board 8084i...
Page 68 - Resolving audio issues
C H A P T E R 7 Troubleshooting your interactive flat panel 60 smarttech.com/kb/170446 Symptom Causes Solution You try to erase usingsomething other than theeraser, but you draw moredigital ink. One of the colorselect button lights isflashing. You’re in Locked Ink modeand all objects areinterpreted ...
Page 70 - Resolving presence detection issues
C H A P T E R 7 Troubleshooting your interactive flat panel 62 smarttech.com/kb/170446 Resolving presence detection issues The sensors for presence detection can detect when people are within 16' (5 m) of the interactive flat panel and automatically turn on or off the interactive flat panel. Symptom...
Page 72 - Checking the camera view
C H A P T E R 7 Troubleshooting your interactive flat panel 64 smarttech.com/kb/170446 Resolving issues using SMART BoardDiagnostics If you touch the interactive flat panel’s surface and nothing happens, or if there is no digital ink or the ink appears in some locations and not in others, use SMART ...
Page 73 - Appendix A; Changing settings in the on-screen display menu
Appendix A 65 smarttech.com/kb/170446 Appendix A: Using the on-screen displaymenu Changing settings in the on-screen display menu 65 SMART Board 8070i-G4-SMP interactive flat panel on-screen display menu 66 SMART Board 8084i-G4-SMP interactive flat panel on-screen display menu 72 You can access the ...
Page 89 - Appendix B
Appendix B 81 smarttech.com/kb/170446 Appendix B: Remotely managing yourinteractive flat panel Connecting and configuring a room control system 82 Connecting a computer to an interactive flat panel 82 Configuring your computer’s serial interface settings 83 Power modes 83 Room control system program...
Page 90 - Connecting a computer to an interactive flat panel
A P P E N D I X B Remotely managing your interactive flat panel 82 smarttech.com/kb/170446 Connecting and configuring a room controlsystem Connect a computer to the room control input on the interactive flat panel to remotely select video inputs, turn on or turn off your interactive flat panel and r...
Page 91 - Configuring your computer’s serial interface settings; Power modes
A P P E N D I X B Remotely managing your interactive flat panel 83 smarttech.com/kb/170446 Configuring your computer’s serial interface settings You need to configure your computer’s serial interface before sending commands. To configure your computer’s serial interface 1. Turn on your interactive f...
Page 92 - Command inventory
A P P E N D I X B Remotely managing your interactive flat panel 84 smarttech.com/kb/170446 Room control system programming commandsand responses To access interactive flat panel information or to adjust interactive flat panel settings using the room control system, type commands after the command pr...
Page 93 - Designating video control settings for a specific video input
A P P E N D I X B Remotely managing your interactive flat panel 85 smarttech.com/kb/170446 Assigning a specific value You can assign a specific value for a setting within the command’s target range. In the example below, the user wants to set the contrast level for the interactive flat panel to 65. ...
Page 94 - Power state
A P P E N D I X B Remotely managing your interactive flat panel 86 smarttech.com/kb/170446 Assigning a value for a video control setting Use the set command to assign values for a video control setting. In the example below, the user wants to set the contrast to 70 for the HDMI1 video input. >set...
Page 95 - Source
A P P E N D I X B Remotely managing your interactive flat panel 87 smarttech.com/kb/170446 Source Use the following commands to identify source settings. Command Response Possible values Standbymode get input input= [Value] l VGA1 l VGA2 l DVI l Video l S_Video l DVD/HD l DisplayPort l HDMI1 l HDMI2...
Page 96 - Video control
A P P E N D I X B Remotely managing your interactive flat panel 88 smarttech.com/kb/170446 Use the following commands to assign source settings. Command Possible values Response Standbymode set input [Value] l =VGA1 l =VGA2 l =DVI l =Video l =S_Video l =DVD/HD l =DisplayPort l =HDMI1 l =HDMI2 l =HDM...
Page 98 - Audio control
A P P E N D I X B Remotely managing your interactive flat panel 90 smarttech.com/kb/170446 Command Possible values Response Standbymode set displaymode [Value] l =DYNAMIC l =STANDARD l =sRGB l =CINEMA l =SPORT l =GAME l =USER l =AMBIENT displaymode= [Value] No set saturation [Value] l + [Incremental...
Page 100 - System information
A P P E N D I X B Remotely managing your interactive flat panel 92 smarttech.com/kb/170446 System information Use the following commands to identify system information settings. Command Response Possible values Standbymode get aspectratio aspectratio= [Value] l 1:1 l 16:9 l 4:3 l zoom1 l zoom2 No ge...
Page 114 - Service information
A P P E N D I X B Remotely managing your interactive flat panel 106 smarttech.com/kb/170446 Command Possible values Response Standbymode set monitorid [Value] =1–100 monitorid= [Value] No set opsfail [Value] l =on l =off opsfail= [Value] No set proximity [Value] l =on l =off proximity= [Value] No se...
Page 119 - Index
Index 111 smarttech.com/kb/170446 A AAA batteries 47 air conditioning 15, 50 ambient lighting 67, 98 aspect ratio 4, 68, 74, 92, 103 audio about 3 configuring 69, 74, 90, 100 controlling volume 7, 39, 41 muting 7, 39, 41 troubleshooting 60 B backlight 73 balance, audio 69, 75, 90, 102 bass 69, 90 ba...
