Page 2 - Product registration
Product registration If you register your SMART product, we’ll notify you of new features and software upgrades. Register online at smarttech.com/registration . Keep the following information available in case you need to contact SMART Support. Serial number: Date of purchase: 1013787 Rev 03 FCC war...
Page 3 - Contents
Contents Chapter 1: Installing your interactive flat panel 1 What’s included 2 Components of your interactive flat panel 3 Wall-mounting your interactive flat panel 4 Chapter 2: Connecting computers and peripheral devices 7 Installing the speakers 8 Connecting a room control system 11 Connecting com...
Page 5 - Chapter 1
Chapter 1: Installing your interactive flatpanel What’s included 2 Installation hardware 2 Accessories 2 Documentation 2 Components of your interactive flat panel 3 Front view 3 Back view 3 Side view 4 Wall-mounting your interactive flat panel 4 Important mounting considerations for trained installe...
Page 6 - What’s included; Installation hardware
What’s included The following items are included with your interactive flat panel. Installation hardware l Five large clamps (for cable management) l Ten small clamps (for cable management) l Power cable l USB cable l VGA cable Accessories l Two speakers with mounting screws l Infrared remote contro...
Page 7 - Components of your interactive flat panel; Front view
Components of your interactive flat panel The following images identify the components of your interactive flat panel. Front view Back view C H A P T E R 1 Installing your interactive flat panel 3 | 1013787 Rev 03
Page 8 - Side view; Wall-mounting your interactive flat panel
Side view N O T E S l The computer connected to VGA 1 and USB 1 accesses the USB drive that's connected to the USB A receptacle. l To disable the USB A receptacle, see SMART Board 8055i interactive flat panel user’s guide ( smarttech.com/kb/170177 ). Wall-mounting your interactive flat panel Use a t...
Page 9 - Important mounting considerations for trained installers
packaging from your authorized SMART reseller ( smarttech.com/where ). l Attach the speakers and connect the speaker wires to the interactive flat panel before you wall-mount it. For more information, see Installing the speakers on page 8. Important mounting considerations for trained installers Con...
Page 10 - Choosing a mounting location; Choosing a mounting height
Choosing a mounting location Consider the following when you select a location for the interactive flat panel: l The wall must be strong enough to support the interactive flat panel and the mounting equipment. The interactive flat panel weighs 98 lb. (44.5 kg). l Do not install the interactive flat ...
Page 11 - Chapter 2
Chapter 2: Connecting computers andperipheral devices Installing the speakers 8 Connecting a room control system 11 Connecting computers to your interactive flat panel 12 Connecting to power and computer 1 13 Setting up the computer 2 connection location 14 Connecting a guest laptop 15 Connecting pe...
Page 12 - Installing the speakers
Installing the speakers Your interactive flat panel comes with two 15 W speakers. g To install the speakers 1. Attach the tether to the speaker. C H A P T E R 2 Connecting computers and peripheral devices 8 | 1013787 Rev 03
Page 15 - Connecting a room control system
Connecting a room control system You can control your interactive flat panel from a room control system. g To connect your interactive flat panel to a room control system Connect an RS-232 cable from the room control input on the inside terminal panel of the interactive flat panel to the serial outp...
Page 17 - Connecting to power and computer 1
Connecting to power and computer 1 g To connect your interactive flat panel to power and computer 1 1. Connect the included VGA cable from your computer to the VGA 1 connector on the bottom terminal panel. 2. Connect the included USB cable from the USB 1 receptacle on the inside terminal panel to a ...
Page 18 - Setting up the computer 2 connection location
Setting up the computer 2 connection location You can set up cabling that enables you to connect a second computer to your interactive flat panel from another location in the room such as on a conference table. By setting up this connection location, you make use of connection points that might not ...
Page 19 - Connecting a guest laptop
g To connect a computer to the computer 2 connection location 1. Place the computer beside the end of the wire bundle at the computer 2 connection location. 2. Connect the USB cable to the computer. 3. Connect the VGA cable to the computer. 4. Turn on the computer. 5. Press the VGA 2 button on the r...
Page 21 - Bottom terminal panel
Connecting peripheral devices to yourinteractive flat panel Connect peripheral devices to the bottom terminal panel. C A U T I O N The AC power outlet is designated for a component of the SMART Board 8055ie-SMP interactive flat panel with appliance. See Replacing the appliance on your SMART product ...
Page 23 - Installing SMART software; Chapter 3
Chapter 3: Installing SMART software Installing SMART Meeting Pro software 20 Using a SMART GoWire cable 20 Installing SMART Notebook software 21 Updating SMART Product Drivers 22 I M P O R T A N T If you already have SMART Meeting Pro software or SMART Notebook™ collaborative learning software inst...
Page 24 - Installing SMART Meeting Pro software; Using a SMART GoWire cable
Installing SMART Meeting Pro software You can download and install SMART Meeting Pro software from the SMART website. I M P O R T A N T Connect to the Internet before you install SMART software so that you can obtain a software product key and download software updates from smarttech.com/registratio...
Page 25 - Installing SMART Notebook software
g To use a SMART GoWire cable 1. Connect a video cable from your interactive flat panel to your laptop. 2. Connect the USB cable from the USB receptacle on your interactive flat panel to your laptop. 3. Change the video input to your laptop's video connection using the remote control or the front co...
Page 26 - Updating SMART Product Drivers
g To install SMART Notebook software 1. Place the included software DVD in your computer’s DVD tray. The installation wizard appears. 2. Follow the on-screen instructions. You’ll be prompted to enter your product key. You can register your interactive flat panel at smarttech.com/registration to rece...
Page 27 - Batteries; Perchlorate Material; Packaging
Appendix A: Hardware environmentalcompliance SMART Technologies supports global efforts to ensure that electronic equipment is manufactured, sold and disposed of in a safe and environmentally friendly manner. Waste Electrical and Electronic Equipmentregulations (WEEE directive) Electrical and electr...
