Smart 800 - Manuals

Extending the USB with an SBX800 CAT5-XTextender You can use the SBX800 CAT5-XT extender to extend the USB interface of your 800 series interactive whiteboard. Using an SBX800 CAT5-XT extender Computer SBX800 CAT5-XT extender Cat 5 cable < 50' (15.25 m) Pen tray extender module Interactivewhitebo...

Chapter 2: Extending the USB ofSMART Board 800i seriesinteractive whiteboard systems Extending the USB with a bus-powered (active) extension cable 8 Using a single USB-XT extension cable 8 Using the USB A to mini-B cable 8 Using a standard USB cable with the USB adaptor 8 Using multiple USB-XT exten...

Using multiple USB-XT extension cables ....- . Computer USB-XT USB-XT USB A to mini B cable Interactive whiteboard system N O T E S l These aren’t plenum-rated solutions. Don’t route multiple USB-XT extension cables where they’re inaccessible, for example, inside walls or ceilings. l USB cable lengt...

Appendix A: USB 2.0 specification primer USB terminology 15 USB topology 17 Connecting USB devices 18 Powering USB devices 18 USB connectors and cables 19 USB connectors 19 USB cables 20 Prohibited cable assemblies 20 USB cable length 20 Extending USB connections 21 Basic USB connection 21 Compound ...

USB topology The USB physical network is a tiered star topology. A hub is at the center of each star. Each wire segment is a point-to-point connection between the host and a hub or function, or a hub connected to another hub or function. This figure illustrates the topology of a USB network. Root hu...

Connecting USB devices USB attachment points are provided by a special class of USB device known as a hub. The additional attachment points provided by a hub are called ports . A host includes an embedded hub called the root hub that can provide one or more attachment points. Hosts may also have oth...

USB connectors and cables USB connectors There are two types of full-size USB connectors: Series-A and Series-B, also known as Type-A and Type-B, respectively. Either connector type can be a receptacle or a plug. l Series-A receptacles are used as outputs from host systems and hubs. l Series-B recep...

USB cables For full-speed and high-speed connections, USB 2.0 specifications allow two types of cable assemblies: l a standard detachable cable that is terminated on one end with a Series-A plug, and terminated on the opposite end with a Series-B plug l a captive cable that is terminated on one end ...

Extending USB connections In USB topology, the hub is the only device that you can use to link USB devices. The distance between hosts and devices, therefore, is limited by the maximum USB cable length allowed between devices and the maximum number of hubs allowed in a path. Basic USB connection In ...

Host with internal non-root hub and compound device connection In this diagram, you can see that connecting a compound device and a host with an internal non-root hub further limits the maximum distance to 4 × 16' (5 m) = 64' (20 m). Host with non - root hub Compound device Root Hub Hub 1 Hub 2 Hub ...