Smart 6055i/8055i SMP/8055ie-SMP - Manual

Feature highlights Commercial-grade, touch-enabled flat panel Your SMART Board 8055i interactive flat panel features SMART’s proprietary DViT® (Digital Vision Touch) technology on an LCD screen which enables you to select, write and erase on the interactive surface. It enables you to do everything y...

For more information, see the SMART Ink user’s guide for Windows® operating systems ( smarttech.com/kb/170191 ) or SMART Ink user's guide for Mac OS X operating system software ( smarttech.com/kb/170192 ). Touch and gestures You can perform mouse functions with your finger, and write and erase digit...

Left side view The left side of your interactive flat panel has the menu control panel and the side terminal panel. Menu control panel The menu control panel enables you to access the on-screen display menu to adjust display and audio settings. For more information on the on-screen display menu, see...

Back view The back of the interactive flat panel includes the bottom terminal panel, the inside terminal panel and the speaker wire connections. I M P O R T A N T Connect all required cables before you wall-mount your interactive flat panel. Some connectors could be inaccessible after wall mounting....

Chapter 2: Installing your interactive flatpanel Environmental requirements 9 Wall-mounting your interactive flat panel 10 Important mounting considerations for trained installers 11 Choosing a mounting location 11 Choosing a mounting height 12 You need a team of professional installers to install y...

Environmental requirement Parameter Storage temperature -4°F to 140°F (-20°C to 60°C) Humidity 5% to 80% relative humidity, non-condensing Ventilation Maintain a 4" (10 cm) ventilation area around your interactive flat panel to enable its cooling fans to operate. Do not store or operate your int...

l Attach the speakers and connect the speaker wires to the interactive flat panel before you wall-mount it. For more information, see Installing the speakers on page 14. Important mounting considerations for trained installers Consider the following when mounting the interactive flat panel on a wall...

l Do not install the interactive flat panel in an area where it will be subjected to strong vibrations or dust. l Do not install the interactive flat panel near where the main power supply enters the building. l Ensure adequate ventilation or provide air conditioning around the interactive flat pane...

Chapter 3: Connecting computers andperipheral devices Installing the speakers 14 Connecting a room control system 15 Connecting computers to your interactive flat panel 16 Interactive flat panel touch control and video input connections 17 Connecting to power and computer 1 17 Computer 1 connection ...

Connecting a room control system You can control your interactive flat panel from a room control system. g To connect your interactive flat panel to a room control system Connect an RS-232 cable from the room control input on the inside terminal panel of the interactive flat panel to the serial outp...

Interactive flat panel touch control and video input connections The following table shows which touch control USB connection corresponds with which video input for each computer connection. Touch control Video input Installation steps Computer 1 USB 1 (inside terminalpanel) VGA 1 page 17 Computer 2...

g To connect your interactive flat panel to power and computer 1 1. Connect the included VGA cable from computer 1 to the VGA 1 receptacle on the bottom terminal panel. 2. Connect the included USB cable from the USB 1 receptacle on the inside terminal panel of the interactive flat panel to a USB rec...

Computer 2 connection diagram g To setup the computer 2 connection location 1. Connect a USB cable to the USB 2 receptacle on the inside terminal panel, and then run the cable to the laptop connection location, such as beside the interactive flat panel or on a conference table. 2. Connect a VGA vide...

Chapter 4: Installing SMART software Installing SMART Meeting Pro software 24 Installing SMART Notebook software 24 I M P O R T A N T If you already have SMART Meeting Pro software or SMART Notebook™ collaborative learning software installed on your computer, ensure your computer has SMART Product D...

Installing SMART Meeting Pro software You can download and install SMART Meeting Pro software from the SMART website. I M P O R T A N T Register your product at smarttech.com/registration so that you can obtain a software product key which is required for activation. g To download SMART Meeting Pro ...

Chapter 5: Using your interactive flat panel Turning on and turning off your interactive flat panel 28 Understanding presence detection 29 Using the infrared remote control 30 Installing batteries in the remote control 30 Infrared remote control sensor 31 Infrared remote control buttons 32 Getting s...

Understanding presence detection N O T E If ECO STANDBY is enabled, presence detection functionality is limited. For more information, see Setup settings on page 78 The interactive flat panel has two presence detection sensors on its frame that can detect people up to 16' (5 m) away. When the sensor...

Using the infrared remote control The infrared remote control enables you to turn on and turn off your interactive flat panel, change the input source, change the volume and more. You can also use the remote control to open the on- screen menu and then change the interactive flat panel’s settings. I...

g To install batteries in the remote control 1. Press the tab on the underside of the remote control, and then open the cover. 2. Remove the batteries if they are present. 3. Insert two new 1.5V AA batteries in the remote control. Ensure the + and - markings on the batteries align with the markings ...

Infrared remote control buttons The remote control enables you to access on-screen menus and change display and input settings. Use the remote control’s POWER ON button turn on your interactive flat panel and the STANDBY button to turn it off. Use the remote control’s input buttons to change input s...

Getting started with your SMART Boardinteractive flat panel Using your SMART Board interactive flat panel, you can write, draw and erase digital ink, manipulate objects and browse content on the screen. About SMART Ink SMART Ink enables you to write and draw in digital ink over open applications, fi...

About your SMART software SMART Ink and SMART Product Drivers are included with SMART Notebook collaborative learning software and SMART Meeting Pro software. SMART Product Drivers SMART Product Drivers enables your computer to detect input from your interactive flat panel. SMART Ink works with SMAR...

9. Press Save Tool Settings to save your settings. 10. Optionally, repeat steps 4 through 9 to customize other pens. 11. Press OK to close SMART Settings. Using Locked Ink mode Locked Ink mode enables you to write or draw digital ink using large objects, including eraser-sized objects. g To use Lock...

g To rotate an object 1. Using one finger on each hand, press the screen at opposite ends of the object. 2. Rotate your fingers in the direction you want to rotate the object. 3. When you reach the angle you want to rotate the object to, release your fingers. Browsing In addition to manipulating obj...

g To pan horizontally or vertically 1. Using two fingers on the same hand, press and hold the screen. 2. Keeping your fingers on the screen, move up, down, left or right. 3. When you reach the area you want to view, release your fingers. Playing audio files on your interactive flat panel Your intera...

Chapter 6: Using guest laptops with yourinteractive flat panel Connecting a guest laptop 47 Using a SMART GoWire cable 48 Connecting computer 2 50 Connecting a guest laptop You can connect a guest laptop to the side terminal panel of the interactive flat panel. When a guest laptop is connected, the ...

g To connect a guest laptop 1. Connect an HDMI cable from the guest laptop’s HDMI input to your interactive flat panel’s side terminal panel. 2. Connect a USB cable from the laptop's USB receptacle to your interactive flat panel’s side terminal panel. I M P O R T A N T The USB A receptacle is for US...

Chapter 7: Maintaining your interactive flatpanel Updating your SMART software and firmware 51 Updating SMART software 51 Updating your interactive flat panel firmware 52 Updating SMART Product Drivers 53 Calibrating your interactive flat panel 54 Orienting your interactive flat panel 55 Replacing a...

g To check for software updates 1. Start your SMART software program. 2. Click Help > Check for Updates . I M P O R T A N T If you do not see the Check for Updates option, contact your network administrator. 3. Click the Update button beside the software you want to update. SMART software updates...

Calibrating your interactive flat panel Digital cameras in the corners of the interactive flat panel track the position of the pens, eraser and your finger on the interactive surface, and then send the information to the SMART software, which interprets this information as mouse clicks, digital ink ...

Orienting your interactive flat panel When the location of your touch is misinterpreted (a pointer appears a distance from the actual contact), orient your interactive flat panel. g To orient the interactive flat panel 1. Press the orientation button on the color select module. The orientation windo...

Cleaning the screen Follow these instructions to clean the interactive flat panel screen without damaging its anti-glare coating or other product components. C A U T I O N l Do not use permanent or dry-erase markers on the screen. If dry-erase markers are used on the screen, remove the ink as soon a...

Cleaning the camera windows and reflective tape The DViT technology in your interactive flat panel uses four cameras in the corners of the frame and the reflective material between the screen and the bezels. Excessive dust buildup on the camera windows or reflective tape can impair touch performance...

Preventing condensation Your interactive flat panel screen contains layers of glass that can collect condensation, especially in the following conditions: l Temperature extremes with high humidity l Rapid changes in humidity, which can occur when you operate the product near water, such as a sink, p...

o Do not place the interactive flat panel on a sloping or unstable cart, stand or table, because the interactive flat panel could fall, resulting in injury or severe product damage. Transporting your interactive flat panel Save your original packaging so that you can repack your interactive flat pan...

Resolving poor image quality Symptom Causes Solution The image is too large, too small or doesn’t completely fill the screen. The computer’s video resolution settings don’t match your interactive flat panel’s native resolution. The interactive flat panel’s native resolution is1920 × 1080 at 60 Hz. I...

Resolving touch control and digital ink issues Use the following troubleshooting table if you can see your computer desktop on your interactive flat panel, but you do not have touch control over the desktop. For more information, see SMART Ink user’s guide for Mac OS X operating system software ( sm...

Resolving audio issues I M P O R T A N T Ensure you can see your computer’s desktop and have touch control and digital ink before using this table. If not, resolve those issues before completing the following steps in the table below. Symptom Causes Solution Sound doesn’t play when you play a sound ...

Resolving issues using SMART BoardDiagnostics If you touch the interactive flat panel’s surface and nothing happens, or if there is no digital ink or the ink appears in some locations and not in others, use SMART Board Diagnostics to help identify and resolve these issues. I M P O R T A N T Do not c...

Appendix A: Adjusting video settings with theon-screen display menu Changing settings in the OSD menu 75 Main menu settings 76 Picture settings 76 Adjustment settings 77 Audio settings 77 OSD settings 77 Setup settings 78 Proximity control settings 79 You can access the on-screen display (OSD) menu ...

6. Press the right arrow to select the setting you want to change and enter a setting sub-menu. OR Press the left arrow to decrease or the right arrow to increase the value. OR Press the left arrow or right arrow to select a value. 7. Press SET . 8. To change another setting in the menu, press the M...

Appendix B: Hardware environmentalcompliance SMART Technologies supports global efforts to ensure that electronic equipment is manufactured, sold and disposed of in a safe and environmentally friendly manner. Waste Electrical and Electronic Equipmentregulations (WEEE directive) Electrical and electr...

Packaging Many countries have regulations restricting the use of certain heavy metals in product packaging. The packaging used by SMART Technologies to ship products complies with applicable packaging laws. A P P E N D I X B Hardware environmental compliance 82

A Adjust settings See also Adjustment settings Adjustment settings 77 audio files playing 45 Audio settings 77 B batteries 81 bottom terminal panel computer 1 video input 18 computer 2 video input 19 connecting a peripheral device 21 connections 7 speaker wire connections 8 C calibration 54 cleaning...