Smart 685ix2 - Manuals

vii smarttech.com/kb/170510 Contents Important information i Safety warnings, cautions and important information i Environmental requirements iv Chapter 1: About your interactive whiteboard system 1 SMART Board 685ix2 interactive whiteboard system features 2 Included accessories 4 Optional accessori...

Chapter 1 1 smarttech.com/kb/170510 Chapter 1: About your interactivewhiteboard system SMART Board 685ix2 interactive whiteboard system features 2 SMART Board 600 series interactive whiteboard 2 SMART UX80 projector 3 Extended Control Panel (ECP) 4 Included accessories 4 Remote control 4 Pens 5 Eras...

C H A P T E R 1 About your interactive whiteboard system 3 smarttech.com/kb/170510 l A durable tear-resistant surface optimized for projection and easily cleaned with whiteboard cleaner l A security cable lock feature that enables you to lock your interactive whiteboard to help safeguard it from the...

C H A P T E R 1 About your interactive whiteboard system 4 smarttech.com/kb/170510 l Self-protection timer for a hot re-strike of the projector lamp l Protected cable routing through the projector housing and a cable cover that prevent tampering and clutter l Secure mounting and installation system ...

C H A P T E R 1 About your interactive whiteboard system 5 smarttech.com/kb/170510 Pens The pens have rubberized grip areas and are colored to match four colors of digital ink: black, red, green and blue. You can use dry-erase markers to replace the included pens, as long as they’re a similar shape,...

Chapter 2 7 smarttech.com/kb/170510 Chapter 2: Installing your interactivewhiteboard system Choosing a location 8 Choosing a height 8 Routing the cables 9 Installing SMART software 9 Setting up the projector image 9 Focusing the image 10 Aligning the image 10 Projector connection diagram 11 Integrat...

C H A P T E R 2 Installing your interactive whiteboard system 8 smarttech.com/kb/170510 Choosing a location Choose a location for your interactive whiteboard system that’s far from bright light sources, such as windows and strong overhead lighting. Bright light sources can cause distracting shadows ...

C H A P T E R 2 Installing your interactive whiteboard system 9 smarttech.com/kb/170510 Routing the cables When connecting cables from the SMART UX80 projector to your interactive whiteboard, make sure that all cables pass between the two interactive whiteboard wall-mounting brackets and that the ca...

C H A P T E R 2 Installing your interactive whiteboard system 10 smarttech.com/kb/170510 Focusing the image Use the focus lever located on the bottom of the SMART UX80 projector to focus the projected image. To focus and adjust the image Turn the focus lever clockwise or counterclockwise until the i...

C H A P T E R 2 Installing your interactive whiteboard system 11 smarttech.com/kb/170510 Use the mechanical adjustments described in the installation document and the image alignment screen to adjust the projected image size, shape and location so that you can see the full projected image clearly. D...

C H A P T E R 2 Installing your interactive whiteboard system 12 smarttech.com/kb/170510 No. Connector Connect to: 6 HDMI 2 In Additional high-definition media (audio and video)source (not included) 7 Power Mains power supply 8 USB B Do not use (for service access only) 9 RJ45 (Cat 5) Network (for w...

Chapter 3 13 smarttech.com/kb/170510 Chapter 3: Using your interactivewhiteboard system Using your projector 13 Using your remote control 13 Using the remote control buttons 14 Adjusting projector settings 15 Using your interactive whiteboard 22 Using the Extended Control Panel (ECP) 22 This chapter...

C H A P T E R 3 Using your interactive whiteboard system 15 smarttech.com/kb/170510 Number Function Description 8 (Enter) Accept the selected mode or option. 9 (Volume Up) Increase audio amplification volume. 10 (Volume Down) Decrease audio amplification volume. N O T E The Mute , Volume Up and Volu...

C H A P T E R 3 Using your interactive whiteboard system 22 smarttech.com/kb/170510 Using your interactive whiteboard Refer to the SMART Board 600 and D600 series interactive whiteboard installation and user’s guide ( smarttech.com/kb/001414 ) for more information on using your interactive whiteboar...

Chapter 4 25 smarttech.com/kb/170510 Chapter 4: Maintaining your interactivewhiteboard system Maintaining your interactive whiteboard 25 Preventing damage to your interactive whiteboard 25 Keeping the writing surface clean 26 Cleaning the pen tray 26 Cleaning the projector 27 Focusing and adjusting ...

C H A P T E R 4 Maintaining your interactive whiteboard system 26 smarttech.com/kb/170510 l Don’t use adhesive tape on the interactive surface. l Don’t use abrasive erasers or harsh chemicals to clean your product. Keeping the writing surface clean Follow these tips to keep the interactive whiteboar...

C H A P T E R 4 Maintaining your interactive whiteboard system 27 smarttech.com/kb/170510 Cleaning the projector W A R N I N G Cleaning a wall-mounted projector can result in a fall or injury. Use caution when climbing a ladder. C A U T I O N l Before you clean the projector, press the Power button ...

C H A P T E R 4 Maintaining your interactive whiteboard system 30 smarttech.com/kb/170510 Replacing the remote control battery Follow this procedure to replace the remote control battery. W A R N I N G l Reduce the risk associated with a leaking battery in the projector’s remote control by following...

Chapter 5 31 smarttech.com/kb/170510 Chapter 5: Troubleshooting your interactivewhiteboard system Before you start 32 Locating status lights 32 Locating serial numbers 33 Determining your interactive whiteboard system’s status 34 Resolving interactive whiteboard issues 35 Resolving operation issues ...

C H A P T E R 5 Troubleshooting your interactive whiteboard system 32 smarttech.com/kb/170510 This chapter provides basic troubleshooting information for your interactive whiteboard system. For issues not covered in this chapter, consult the SMART Support website ( smarttech.com/support ) or contact...

C H A P T E R 5 Troubleshooting your interactive whiteboard system 33 smarttech.com/kb/170510 Locating serial numbers The serial number on your SMART Board 600 series interactive whiteboard is located on the lower- right edge of the interactive whiteboard’s frame. For more information, see the SMART...

C H A P T E R 5 Troubleshooting your interactive whiteboard system 35 smarttech.com/kb/170510 ProjectorPower light ProjectorService light ECP light InteractivewhiteboardReady light Projectedimage Touch andpen control Status and relatedtroubleshooting Solid green Off Solid green Off OR Solid red N/A ...

C H A P T E R 5 Troubleshooting your interactive whiteboard system 36 smarttech.com/kb/170510 l Confirm that the interactive whiteboard's USB cable is properly connected between the computer and the correct USB port on the ECP. l Reset the interactive whiteboard system. If necessary, complete additi...

C H A P T E R 5 Troubleshooting your interactive whiteboard system 37 smarttech.com/kb/170510 Resolving projector issues Resolving projector errors System administrators can resolve the following projector errors on their own prior to contacting SMART Support. Performing initial troubleshooting on y...

C H A P T E R 5 Troubleshooting your interactive whiteboard system 39 smarttech.com/kb/170510 Resolving image issues To resolve common image issues, complete the following tasks: l Ensure the computer or other video source is on and set to display a resolution and refresh rate supported by the proje...

C H A P T E R 5 Troubleshooting your interactive whiteboard system 42 smarttech.com/kb/170510 The projector image can slip if the projector is moved often or installed in a location prone to vibration, such as next to a heavy door. Follow these precautions to help prevent the image from becoming mis...

C H A P T E R 5 Troubleshooting your interactive whiteboard system 43 smarttech.com/kb/170510 l Check the ECP’s volume knob or use the projector’s remote control to ensure that the volume isn’t at the lowest setting. Use the projector’s remote control to ensure that the volume isn’t at the lowest se...

C H A P T E R 5 Troubleshooting your interactive whiteboard system 44 smarttech.com/kb/170510 Resolving ECP issues If the ECP isn’t receiving power, complete the following tasks: l Confirm that the ECP cable harness’s ECP connector is properly connected to the ECP. l Confirm that the ECP cable harne...

C H A P T E R 5 Troubleshooting your interactive whiteboard system 45 smarttech.com/kb/170510 Resetting the projector At some point during troubleshooting, you might need to reset all projector settings. I M P O R T A N T This action is irreversible. To reset all projector settings 1. Using the remo...

A P P E N D I X A Remotely managing your system through a network interface 48 smarttech.com/kb/170510 Accessing web page management Before you can access the web page, connect your projector to the network, and then enable the projector’s network functions using the projector’s menu. An IP address ...

A P P E N D I X A Remotely managing your system through a network interface 49 smarttech.com/kb/170510 Control panel This menu enables you to manage the projector audio and video status, alerts and appearances using an Internet browser. N O T E Image Adjustment settings displays only settings applic...

A P P E N D I X A Remotely managing your system through a network interface 52 smarttech.com/kb/170510 Submenu setting Description Emergency Alert Turns the on-screen alert broadcast message on or off. Whenenabled, this message displays over the current projected image. Alarm Message / Alert Message...

A P P E N D I X A Remotely managing your system through a network interface 53 smarttech.com/kb/170510 USB Control settings This menu allows you to associate a video source with a USB receptacle on the ECP. Submenu setting Description USB1 Source Enables touch for the selected video source ( VGA , H...

A P P E N D I X A Remotely managing your system through a network interface 56 smarttech.com/kb/170510 Simple Network Management Protocol (SNMP) Your projector supports a list of SNMP commands as described in the management information base (MIB) file. You can download this file by browsing to smart...

Appendix B 57 smarttech.com/kb/170510 Appendix B: Remotely managing your systemthrough an RS-232 serialinterface Connecting your room control system to the SMART UX80 projector 58 Pin configuration on the projector’s RS-232 connector 58 Serial interface settings 58 Projector programming commands 59 ...

A P P E N D I X B Remotely managing your system through an RS-232 serial interface 58 smarttech.com/kb/170510 Connecting your room control system to theSMART UX80 projector By connecting a computer or room control system to the RS-232 serial interface of the SMART UX80 projector, you can select vide...

A P P E N D I X B Remotely managing your system through an RS-232 serial interface 59 smarttech.com/kb/170510 3. Configure your serial interface settings using the values in the previous table, and then press ENTER. The > character appears as a command prompt. N O T E If no message or an error me...

A P P E N D I X B Remotely managing your system through an RS-232 serial interface 61 smarttech.com/kb/170510 Power state controls These commands put the projector in and out of Standby mode and request the projector’s current power state. The projector’s power state determines whether certain comma...

A P P E N D I X B Remotely managing your system through an RS-232 serial interface 62 smarttech.com/kb/170510 Display controls These commands control the video display of the projector. Usable Command by Power State Property Valid Values Notes Standby / Idle On get get videoinputs Returns a text lis...

A P P E N D I X B Remotely managing your system through an RS-232 serial interface 63 smarttech.com/kb/170510 Audio controls These commands control the audio of the projector. Usable Command by Power State Property Valid Values Notes Standby / Idle On set or get volumecontrol • on • off (default) Wh...

A P P E N D I X B Remotely managing your system through an RS-232 serial interface 64 smarttech.com/kb/170510 System controls These commands control the integration properties of the projector. Usable Command by Power State Property Valid Values Notes Standby / Idle On set or get set or get usb1sour...

A P P E N D I X B Remotely managing your system through an RS-232 serial interface 66 smarttech.com/kb/170510 Service and support controls These commands control the integration properties of the projector. Usable Command by Power State Property Valid Values Notes Standby / Idle On get modelnum [mod...

A P P E N D I X B Remotely managing your system through an RS-232 serial interface 68 smarttech.com/kb/170510 Network controls These commands control the integration properties of the projector. Usable Command by Power State Property Valid Values Notes Standby / Idle On set or get network • on • off...

A P P E N D I X B Remotely managing your system through an RS-232 serial interface 70 smarttech.com/kb/170510 Advanced display controls These commands control the integration properties of the projector. Usable Command by Power State Property Valid Values Notes Standby / Idle On set or get projectio...

A P P E N D I X B Remotely managing your system through an RS-232 serial interface 72 smarttech.com/kb/170510 3D function controls Us these commands to select the 3D function. Usable Command by Power State Property Valid Values Notes Standby / Idle On set or get 3denable • on • off (default) set or ...

Appendix C 81 smarttech.com/kb/170510 Appendix C: Integrating other devices Video format compatibility 81 Native video format 81 Video format compatibility 82 HD and SD signal format compatibility 83 Video system signal compatibility 84 Connecting peripheral sources and outputs 84 This appendix prov...

A P P E N D I X C Integrating other devices 83 smarttech.com/kb/170510 Resolution Mode Aspect ratio Refresh rate (Hz) “Match Input” appearance 1280 × 1024 SXGA3 75 5:4 75.025 Pillarbox 1280 × 1024 SXGA3 85 5:4 85.024 Pillarbox 1400 × 1050 SXGA+ 4:3 59.978 Pillarbox 1600 × 1200 UXGA 4:3 60 Pillarbox ...

A P P E N D I X C Integrating other devices 84 smarttech.com/kb/170510 Video system signal compatibility The following tables list the projector’s video system signal compatibility delivered over HDMI video connectors, which you can adjust by using the aspect ratio commands described in Adjusting pr...

Appendix D 87 smarttech.com/kb/170510 Appendix D: Remote control code definitions IR signal format: NEC1 Key Repeatformat Vendor code Key code Byte 1 Byte 2 Byte 3 Byte 4 Input F1 8B CA 14 EB Power ( ) F1 8B CA 12 ED Menu F1 8B CA 1B E4 Up ( ) F1 8B CA 40 BF Left ( ) F1 8B CA 42 BD Enter ( ) F1 8B C...

Appendix E 89 smarttech.com/kb/170510 Appendix E: Hardware environmentalcompliance SMART Technologies supports global efforts to ensure that electronic equipment is manufactured, sold and disposed of in a safe and environmentally friendly manner. Waste Electrical and Electronic Equipment andBattery ...

Index 91 smarttech.com/kb/170510 3 3.5 mm audio connectors 11 A accessories included 4 optional 5 alarms 52 aspect ratios 3, 51, 81-84 Aspect ratios 18, 76 audio controlling volume of 23, 49 muting 14 resolving issues with 42 B batteries 30, 89 Blu-ray 85 C closed captioning 49 connection diagrams E...