Page 2 - Register online at; Serial Number; Registration Benefits
FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Par t 15 of the FCC Rules. These limits are designed to provide reasonable protec tion against harmful inter ference when the equipment is operated in a commercial environment. Th...
Page 3 - Important Information; Read This Section First
99-00881-20 A0 Important Information i Important Information Read This Section First NOTE: If you own a SMART product other than a Unifi™ 45 projector retrofit kit for SMART Board 500 series interactive whiteboards, refer to the installation manual that came with your product for relevant warnings a...
Page 4 - Safety Warnings
ii Important Information 99-00881-20 A0 Safety Warnings WARNING • Failure to follow the installation instructions included in this manual and other guides packaged with your Unifi 45 projector retrofit kit could result in personal injury or damage to the product. • Two people are required to mount t...
Page 6 - Other Precautions
iv Important Information 99-00881-20 A0 Other Precautions To ensure operating safety and to avoid product damage, observe the following precautions. • Never operate this unit immediately after moving it from a cold location to a warm location. When the unit is exposed to such a change in temperature...
Page 7 - Table of Contents
99-00881-20 A0 Table of Contents v Table of Contents Important Information i Read This Section First ................................................................................................................................... iSafety Warnings .....................................................
Page 8 - Customer Support
vi Table of Contents 99-00881-20 A0 Customer Support 47 Online Support ............................................................................................................................................. 47Training ...............................................................................
Page 9 - About Your Unifi 45 Projector Retrofit Kit; In This Chapter
99-00881-20 A0 About Your Unifi 45 Projector Retrofit Kit 1 About Your Unifi 45 Projector Retrofit Kit In This Chapter Your Unifi 45 projector retrofit kit enables you to combine the SMART Unifi 45 wall mounted short-throw projector with your SMART Board 580 or 560 interactive whiteboard to create a...
Page 11 - Standard Accessories; Unifi 45 Projector Remote Control
99-00881-20 A0 About Your Unifi 45 Projector Retrofit Kit 3 Standard Accessories SMART provides the following accessories with your Unifi 45 projector retrofit kit. If you need to purchase replacements, contact your authorized SMART reseller . Extended Control Panel (ECP) and Cable The new interacti...
Page 13 - Before Installing Your Unifi 45 Projector Retrofit Kit
99-00881-20 A0 Before Installing Your Unifi 45 Projector Retrofit Kit 5 Before Installing Your Unifi 45 Projector Retrofit Kit In This Chapter For instructions on installing your Unifi 45 projector retrofit kit, consult the installation documents found in your Unifi 45 projector boxes. Use these mat...
Page 14 - Environmental Requirements
6 Before Installing Your Unifi 45 Projector Retrofit Kit 99-00881-20 A0 Environmental Requirements Before installing your Unifi 45 projector retrofit kit, review the following environmental requirements. CAUTION • Never operate this unit immediately after moving it from a cold location to a warm loc...
Page 15 - Recommended Heights for Mounting
99-00881-20 A0 Before Installing Your Unifi 45 Projector Retrofit Kit 7 Before Installing Your SMART Board Interactive Whiteboard System Choose a location for your SMART Board interactive whiteboard system that’s far from bright light sources, such as a window or overhead lighting. Bright light sour...
Page 16 - After Installing Your Interactive Whiteboard System; Adjusting Image Alignment
8 Before Installing Your Unifi 45 Projector Retrofit Kit 99-00881-20 A0 After Installing Your Interactive Whiteboard System After you install the Unifi 45 projector with your SMART Board 500 eries interactive whiteboard, you must adjust the image alignment and focus. Adjusting Image Alignment When y...
Page 17 - NOTES; To set the projector boom’s height
99-00881-20 A0 Before Installing Your Unifi 45 Projector Retrofit Kit 9 The image appears taller on the left side when the distance from the projector mirror to the right of the screen is shorter than the distance to the left of the screen. The image appears taller at the right side of the image whe...
Page 18 - Lowest Point of
10 Before Installing Your Unifi 45 Projector Retrofit Kit 99-00881-20 A0 3. If the distance isn’t correct, adjust the center hex screw at the base of the projector boom to raise or lower the angle of the boom. TIP You may find it easier to turn the height adjustment screw if an assistant lifts up th...
Page 19 - To adjust the mirror’s depth and vertical angle for alignment
99-00881-20 A0 Before Installing Your Unifi 45 Projector Retrofit Kit 11 NOTE: This procedure sets the mirror to a neutral position. However, further adjustments will be required. 1. Remove the boom’s front cover. You can now access the adjustment screws. To adjust the mirror’s depth and vertical an...
Page 21 - To adjust the horizontal angle for alignment
99-00881-20 A0 Before Installing Your Unifi 45 Projector Retrofit Kit 13 1. Adjust thumbscrew 2 to center the mirror’s horizontal angle, as shown. NOTE: These images show the mirror from below. Make sure that the mirror isn’t angled too far left or too far right. To adjust the horizontal angle for a...
Page 23 - To perform an image alignment
99-00881-20 A0 Before Installing Your Unifi 45 Projector Retrofit Kit 15 Use the following procedure to obtain a rectangular image that is slightly smaller than the interactive whiteboard’s screen. NOTES • We recommend that you project a computer image while performing the following steps. If you do...
Page 27 - Connecting Your Interactive Whiteboard System; In this Chapter; Upgrading Your Version of SMART Board Software
99-00881-20 A0 Connecting Your Interactive Whiteboard System 19 Connecting Your Interactive Whiteboard System In this Chapter When you connect a computer with SMART Notebook software, you can display and interact with Ink Aware programs on your SMART Board interactive whiteboard system. After you co...
Page 28 - Connecting Your Computers to the Interactive Whiteboard System; COMPUTER 2 I
20 Connecting Your Interactive Whiteboard System 99-00881-20 A0 Connecting Your Computers to the Interactive Whiteboard System You must connect your computers’ video and audio outputs to your Unifi 45 projector or your Extended Control Panel (ECP). Use only one set of the following instructions for ...
Page 29 - ECP Input
99-00881-20 A0 Connecting Your Interactive Whiteboard System 21 Connecting Audio/Visual Outputs from Your Guest Computer to Your Interactive Whiteboard System’s ECP Input 1. Make sure that you have a shielded VGA cable (not included) and an audio cable with 3.5 mm plugs (optional, not included) long...
Page 30 - Connecting Peripheral Visual or Audio-Visual Devices
22 Connecting Your Interactive Whiteboard System 99-00881-20 A0 Connecting Peripheral Visual or Audio-Visual Devices To connect a DVD player, VCR, document camera, digital camera or other visual or audio-visual peripherals to the SMART Board interactive whiteboard system, you must connect your perip...
Page 31 - Using Your Interactive Whiteboard System; After Completing the Installation
99-00881-20 A0 Using Your Interactive Whiteboard System 23 Using Your Interactive Whiteboard System In This Chapter This chapter describes the basic operation of your interactive whiteboard system, how to retrieve system information and how to access the projector’s image adjustment options. • After...
Page 32 - Using Your Unifi 45 Projector
24 Using Your Interactive Whiteboard System 99-00881-20 A0 Using Your Extended Control Panel (ECP) Your ECP includes a Power button and four Input Selection buttons. The ECP enables you to connect up to three peripheral devices and one host computer at the same time. 1. Press the ECP’s Power button ...
Page 34 - Adjusting Your Projector Settings
26 Using Your Interactive Whiteboard System 99-00881-20 A0 Adjusting Your Projector Settings Image Adjustment Options Contrast This option adjusts projector contrast, from -16 to 16. Brightness This option adjusts projector brightness, from -16 to 16. Color, Tint and Sharpness Use these options to a...
Page 37 - Lamp Time
99-00881-20 A0 Using Your Interactive Whiteboard System 29 Lamp Reset Count This field shows the number of times the Lamp Time has been reset. Total Time This field shows your interactive whiteboard system’s operating time since initial startup. Version This field shows your projector firmware versi...
Page 39 - Maintaining Your Unifi 45 Projector System
99-00881-20 A0 Maintaining Your Unifi 45 Projector System 31 Maintaining Your Unifi 45 Projector System In This Chapter This chapter describes methods to prevent damage to your Unifi 45 projector system and explains how to properly clean and care for it. • Cleaning Your Unifi 45 Projector (this page...
Page 40 - Replacing Your Projector Lamp
32 Maintaining Your Unifi 45 Projector System 99-00881-20 A0 Replacing Your Projector Lamp If a lamp fails or if a replacement message appears on the screen, a qualified person can replace the projector lamp. Do not access the service panel without a replacement lamp and instructions in hand. WARNIN...
Page 41 - To remove the projector plate assembly from the projector boom
99-00881-20 A0 Maintaining Your Unifi 45 Projector System 33 1. Put the system in Standby mode by pressing the power button on the ECP. Wait for the system to enter Standby mode, and then turn the projector’s master power switch off to shut down the system. 2. Unplug the power cord and all connected...
Page 43 - Transporting Your Projector System
99-00881-20 A0 Maintaining Your Unifi 45 Projector System 35 Transporting Your Projector System Save your original Unifi 45 projector retrofit kit packaging so that it’s available if you need to transport your system. When required, repack it with as much of the original packaging as possible. This ...
Page 45 - Troubleshooting Your Interactive Whiteboard System; System Warning Lights; Extended Control Panel (ECP) Ready Light and System Status
99-00881-20 A0 Troubleshooting Your Interactive Whiteboard System 37 Troubleshooting Your Interactive Whiteboard System In this Chapter This chapter deals with basic troubleshooting issues for your SMART Board interactive whiteboard system that you can easily solve. For more complex issues, or issue...
Page 46 - Contacting SMART Technical Support
38 Troubleshooting Your Interactive Whiteboard System 99-00881-20 A0 Projector Ready Lights and Projector Status The three projector ready lights are located on the underside of the projector. They are marked Lamp, On/Standby and Temp (for temperature). Contacting SMART Technical Support SMART Techn...
Page 49 - Command Inventory
99-00881-20 A0 Appendix A: Remote Management of Your Interactive Whiteboard System 41 The embedded firmware program coordinates command sequencing and is capable of buffering up to 127 commands. In each power state, the buffer accepts valid commands until the program can process them. NOTES • In the...
Page 50 - on; set input vga1
42 Appendix A: Remote Management of Your Interactive Whiteboard System 99-00881-20 A0 1. Type on , and then press ENTER. 2. Type set input vga1 , and then press ENTER. To allow the ECP to sequence the commands To control the sequence programmatically
Page 53 - Regulatory Compliance; Waste Electrical and Electronic Equipment Regulations; Restriction of Certain Hazardous Substances (RoHS) Directives
99-00881-20 A0 Regulatory Compliance 45 Regulatory Compliance Waste Electrical and Electronic Equipment Regulations Waste Electrical and Electronic Equipment regulations apply to all electrical and electronic equipment sold within the European Union. When you dispose of any electrical or electronic ...
Page 55 - Address: SMART Technologies
99-00881-20 A0 Customer Support 47 Customer Support Online Support Visit www.smarttech.com/support to view and download user’s guides, “how-to” and troubleshooting articles, software and more. Training Visit www.smarttech.com/trainingcenter for training materials and information about our training s...
Page 57 - Index
99-00881-20 Index 49 Index A Adjusting Advanced image adjustment options 26Default settings 27 Auto input search 27Beep 27Blackboard mode 27Fan mode 28Keystone 27Lamp power 28No signal power off 27Power on 28Projection mode 28Resetting all 28 Image adjustment options 26 Brightness 26Color, tint and ...
Page 60 - SMART Technologies
SMART Technologies 1207 – 11 Avenue SW, Suite 300 Calgary, AB T3C 0M5 CANADA www.smarttech.com/support www.smarttech.com/contactsupport Support +1.403.228.5940 Toll Free 1.866.518.6791 (U.S./Canada) 99-00881-20 REV A0
