Smart 710.0026 - Manual
Smart 710.0026 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SmarTire LF Initiator Operating Instructions
- Page 3 – INTRODUCTION; New Installations; – programming sensor ID numbers & vehicle configuration into the; Sensor Replacement; - programming new sensor ID numbers into the receiver; Installation Verification; sensors are removed from a vehicle.; Initiate Button
- Page 4 – LED FUNCTIONS; GREEN = Working properly (approx 5 second illumination duration); USING THE LF INITIATOR
- Page 7 – SMARTIRE PRODUCT & SERVICE PART WARRANTY:
- Page 8 – FCC NOTICE
SmarTire LF Initiator Tool
PN: 710.0026
Revision 1.2
Instruction Manual
© Copyright 2006
SmarTire Systems Inc.
Duplication of this document in whole or in part for any purposes other than those for which it was originally
intended, without the written approval of SmarTire Systems Inc. is strictly prohibited.
This manual may be changed by SmarTire Systems Inc. at any time and without notice.
REFERENCE ONLY
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
710.0026 R1.2 SmarTire LF Initiator Operating Instructions 2 TABLE OF CONTENTS INTRODUCTION ................................................................................................................................ 3 OVERVIEW........................................................................
710.0026 R1.2 SmarTire LF Initiator Operating Instructions 3 INTRODUCTION The SmarTire LF Initiator is a handheld tool designed to provoke data transmissions from SmarTire High Pressure Sensors. The tool can be used to assist the installer during: • New Installations – programming sensor ID numbers ...
710.0026 R1.2 SmarTire LF Initiator Operating Instructions 4 Learn: Press this button to make a sensor transmit a ‘Learn’ transmission. Learn transmissions are used when reprogramming sensor ID numbers into the SmarTire receiver. LED FUNCTIONS Whenever a button is pressed, the LF Initiator Tool indi...
