SIIG PCI 2S - Manuals - manualsarea.com

Page 2 - Package Contents; CyberPro PCI 2S board; Layout; Note: Most serial devices do not require additional; power through the serial port. Refer to your serial

2 Package Contents • CyberPro PCI 2S board • Driver CD • Quick installation guide Layout Figure 1. Layout Jumper Settings (JP1, JP2) Open = 0 volts (default)Short 1-2 = 5VShort 2-3 = 12V Note: Most serial devices do not require additional power through the serial port. Refer to your serial device's ...

Page 3 - Hardware Installation

3 Hardware Installation General instructions for installing the card are provided below. Since the design of computer cases and motherboards vary, refer to your computer’s reference manual for further information, if needed.Static Electricity Discharge may permanently damage your system. Discharge a...

Page 4 - Driver Installation; CyberPro PCI 2S drivers.; Copying Files dialog box appears, type in

4 Driver Installation This section provides information on how to install the CyberPro PCI 2S drivers. Windows 95 1. At the Update Device Driver Wizard, click Next. 2. Insert the driver CD, and click Other Locations. Type in D:\9x, click OK, then Finish. (Change D: to match your CD-ROM drive letter)...

Page 5 - Windows ME; CyberPro 2S PCI board and PCI Function should

5 Windows ME 1. At the Add New Hardware Wizard, select Specify the location of the driver (Advanced), click Next. 2. Insert the driver CD, check Specify a location, uncheck the other box, type in D:\Me, then click Next. (Change D: to match your CD-ROM drive letter) 3. Click Next, then Finish. 4. Rep...

Page 6 - the search, uncheck the other check box, type in; Continue Anyway, then Finish. Our driver has been

6 To Verify Windows NT 4.0 Installation 1. Click Start, Settings, Control Panel, double click Ports device icon. 2. Two new COM ports will be assigned when successfully installed. Windows 2000 1. At the Found New Hardware Wizard, click Next. 2. Select Search for a suitable driver for my device (reco...

Page 7 - Anyway, then Finish. Our driver has been tested for; CyberPro 2S PCI board should be displayed.

7 Windows Server 2003 1. At the Found New Hardware Wizard, choose Install from a list or specific location (Advanced), then click Next. 2. Insert the driver CD, check Include this location in the search, uncheck the other check box, type in D:\2003, and click Next. (Change D: to match your CD-ROM dr...

Page 8 - Changing COM Port Address; CyberSerial PCI serial port you want to change.

8 Changing COM Port Address Some serial devices need a specific COM port in order to work. If your serial device works properly, do not change this setting. Windows 95/98/98SE/ME 1. From the Device Manager window double click Ports (COM & LPT), then double click the CyberSerial PCI serial port y...

Page 9 - Technical Support and Warranty; Q U E S T I O N S ? S I I G ’ s O n l i n e S u p p o r t h a s a n s w e r s !

9 Technical Support and Warranty Q U E S T I O N S ? S I I G ’ s O n l i n e S u p p o r t h a s a n s w e r s ! Simply visit our website at www.siig.com and click on Support. Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few c...