SIIG L732 - Manuals

SIIG L732 – Manual in PDF format online.

Manuals:

Manual SIIG L732

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8

Summary

Page 2 - Caution; INSTALLATION AND OPERATING INSTRUCTIONS; Hardware Kit

Caution A G B H-1 C H-2 D I E J F K L (×4) M8×16 screw (×4) M6×16 screw (×1) Bubble level (×4) M5×35 screw (×4) M8×80 bolt (×4) M8×35 screw (×4) M8 spacer (×4) M6×35 screw (×4) Concrete anchor It is recommended that two people perform the installation. Injury and/or damage can result from dropping o...

Page 3 - a) Wood Stud Installation; You should mark two positions total.; Step 1: Wall Plate Installation; Phillips head screw driver

1 2 3 4 5 3 4 5 7 8 a) Wood Stud Installation You should mark two positions total. Stud finder for drywall installation NOTE: When mounting to wood studs, the two wood studs must be a minimum of 16" apart. Use a high-quality electronic stud finder (commercially available) to locate dead center o...

Page 4 - NOTE: The concrete anchors must be used for concrete installation.; Do not tighten until all bolts are in place.

2 3 4 5 6 7 8 9 NOTE: The concrete anchors must be used for concrete installation. If necessary, a hammer can be used to lightly tap each anchor into place so that they are flush with the wall. Tighten the bolt with the 1/2" socket or 1/2" open-end wrench by turning clockwise until tight. CA...

SIIG Manuals