SIIG ID-SC0511-S1 - Manuals

SIIG ID-SC0511-S1 – Manual in PDF format online.

Manuals:

Manual

Manual SIIG ID-SC0511-S1

Summary

Page 4 - System Requirement; IBM compatible computer or Mac

4 System Requirement  IBM compatible computer or Mac  Windows 2000, Windows XP, Windows Vista 32/64-bit, Windows 7, Mac 10.x  An available USB port  64 MB RAM or higher  Pentium  233 MHz or higher

Page 6 - Hardware Dimension

6 USB to 1-port RS-232 Hub Hardware Dimension 100mm

Page 7 - Hardware Introduction

Page 14 - RJ45 Pin Assignment

14 RJ45 Pin Assignment 3. Installation On Windows 2000/ Windows XP/ Windows Vista / Windows 7 Note: DO NOT connect the Serial to USB Device to computer before installing the driver. 1. Please insert the provided CD into CD-ROM and click driver setup file to install.

Page 15 - Finish; ” to process driver installation.

15 2. Please click “ Finish ” to process driver installation. When the installation completed, please connect the USB to Serial Converter to available USB port.

Page 16 - Installation Verification

16 Installation Verification To verify your installation, please launch Device Manager as following:  Under Windows  2000/ Windows  XP operating system: Right-Click My Computer and select Properties > System > ( Hardware ) > Device Manager .  Under Windows Vista  / Windows  7 operatin...

Page 17 - Continue

17 On Mac  OS X Support Mac Driver Installation:  Mac OS  X v10.1 and later for PowerPC Mac  Mac OS  X v10.4 and later for Intel Mac Installation: 1. Insert the provided driver CD into your CD-ROM drive. Double-click the CD and navigate to the directory of \Driver\Mac\Mac_OS X 10.x\/MCS7840Inst...

Page 18 - that you want to install and click; ” to perform a basic installation.

18 3. When the screen below appears, please choose the destination volume that you want to install and click Continue . 4. Please click “ Install ” to perform a basic installation.

Page 19 - Please enter your password as prompted.; Continue Installation; to install the software when the; Restart; to reboot the Mac.

19 5. Please enter your password as prompted. 6. Please select Continue Installation to install the software when the screen below prompted. 7. Please click Restart to reboot the Mac.

Page 20 - kextstat; ” to terminal bash.

20 8. Please connect the device to available USB port to your Mac. 9. Installation Verification: Please key in “ kextstat ” to terminal bash. When above dialog box appears, it means the driver installation has been installed successfully.

Page 21 - Connect Serial Port Device; Now you can connect your RS-232 device through the device.

21 Connect Serial Port Device Now you can connect your RS-232 device through the device.

Page 22 - Blank Page

Page 23 - Technical Support and Warranty

23 Technical Support and Warranty QUESTIONS? SIIG ’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit ...