SIIG 04-0918A - Manuals - manualsarea.com

Page 2 - Layout; LED Lights; Touch the switch to adjust the LED light brightness; Mounting Holes; To be hooked up with; Wall mount bracket; when

2 Layout 1. LED Lights 18 LEDs with output up to 108 Lumens.Color Temperature: 5500K( Daylight Color) 2. One-Touch Dimmer Switch Touch the switch to adjust the LED light brightness or tap once to turn the power on or off. 1 2 4 5 6 7 8 3. Mounting Holes To be hooked up with Wall mount bracket when m...

Page 3 - Display Settings Buttons; Figure 3; Time/Temperature Display

3 Mode Time Date Day Temperature 5. Display Settings Buttons Press the buttons to change the alarm or time/date/ day setting. 6. CR2025 Battery Compartment Powers the Time/Temperature display via CR2025 battery. 7. Mini USB Charging Port Connect to USB power source to charge the internal rechargeabl...

Page 4 - Instructions for Use; Figure 5; LED Light; Figure 6

4 Instructions for Use 1 . When using the LED Light, hold the base stand by one hand, and pull the upper light arm upward by anotherhand to unfold it. Figure 5 hold the basestand Pull up or press down theupper light arm 2. Plug the Mini USB tip of included Mini USB charging cable into the LED Light ...

Page 5 - Figure 7; Figure 8

5 NOTE : Please use the included Mini USB charging cable to charge the LED Light . Using a different USB cable is not recommended. 3. Wait for the Charging Status LED goes off, the charging process is complete. NOTE: Please make sure the LED Folding Light is fully charged before use. 4. Before initi...

Page 6 - Figure 9a Figure 9b; Touch one time To turn on or turn off the LED light

6 6. Pull up or press down the upper light arm to the best angle to fit your needs. Figure 9a Figure 9b sensor When fully folded, the LEDsgo off automatically NOTE : There's a sensor on the back of the base stand (See Figure 9a ). If the unit is fully folded, the LED lights turn off automatically (S...

Page 7 - Press the; on the rear side of the

7 Time/Date Settings Press the Display Settings Buttons on the rear side of the change the Time/Date settings. MODE Press the button to switch between "time display mode" or "alarm mode". * In time display mode, it shows TIME on the display; in alarm mode, a clock symbol appears inst...

Page 8 - Application

8 Alarm Settings1 . Press the MODE button to change to Alarm mode. 2. Press the SET and UP/DOWN button to set your alarm time, alarm internal in snooze mode, and ring tone in order. NOTE : Snooze mode is supported by the LED Light ; the alarm will ring for 1 minute on regular interval. 3. Press the ...

Page 9 - NOTE; LED Folding Light; Mini USB Charging Port; Figure 11a Figure 11b

9 NOTE : For best adhesion, make sure to clean the wall surface before attaching the bracket to the wall. Place the LED Folding Light vertically. Make sure the Mini USB Charging Port is facing up. Line up the two Mounting Holes on the LED Light to the hooks of the Wall mount bracket , then insert it...

Page 10 - Desktop; Unfold and place on the desktop. See; Fully folded; Fully fold and carry anywhere.; Figure 12a Figure 12b

1 0 • Desktop Unfold and place on the desktop. See Figure 12a . • Fully folded Fully fold and carry anywhere. See Figure 12b . Figure 12a Figure 12b

Page 11 - Technical Support and Warranty

1 1 Technical Support and Warranty QUESTIONS? SIIG ’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit...

Page 12 - PRODUCT NAME; FCC COMPLIANCE STATEMENT:

About SIIG, Inc. Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB, and legacy I/O adapters) that bridge the connection between Desktop/ Notebook systems and external peripherals. SIIG continues to grow b...