SIIG 04-0790A - Manuals - manualsarea.com

Page 2 - System Requirements; Notebook or desktop PC with an available; Package Contents; Enclosure

2 System Requirements • Notebook or desktop PC with an available USB 2.0/3.0 port (USB 3.0 recommended) • Windows® 7 (32-/64-bit) ) / Vista (32-/64- bit) / XP (32-/64-bit) / Server 2003 & 2008 (32-/64-bit) Package Contents • SuperSpeed USB 3.0 to SATA 2.5" Tool-less Enclosure • USB 3.0 Y-spl...

Page 3 - Layout

3 Layout USB 3.0 micro-B connector Power/Activity LED Slider to release the cases Figure 1: Back Panel Layout USB 3.0 Y-split Cable Figure 2: USB 3.0 Y-split Cable Connectors Top cover Bottom cover

Page 4 - Power and Activity LED; Hardware Installation

4 Power and Activity LED The LED indicator illuminates solid blue when the enclosure is connected and powered up. The LED flashes during data transfer. Do not disconnect the enclosure while the LED is flashing Hardware Installation The following section guides you through the installation of your dr...

Page 5 - Figure 6

5 2 . Open the inner top case, slide in the SATA HDD and connect it to the PCBA SATA connector (see Figure 5 and Figure 6 ). Figure 5 Figure 6 Note: This enclosure supports 12.5mm height hard drives. For a 9.5mm drive, attach the included sponge(s) to the inner top case to fill the gap and secure th...

Page 7 - less Enclosure; LED

7 Important: In most cases the Type-A data (blue) connector will supply enough power to the enclosure. If not, use the optional Type-A power (white) connector to supply more power. Before proceeding, first unplug the Type-A data (blue) connector, then plug the Type-A power (white) connector to an av...

Page 8 - Driver Installation; T o o l - l e s s E n c l o s u r e; Using the; SuperSpeed USB 3.0 to SATA; My; Disconnecting from the Computer; SuperSpeed USB 3.0 to

8 Driver Installation Windows will automatically detect and install drivers for the SuperSpeed USB 3.0 to SATA 2.5" T o o l - l e s s E n c l o s u r e . N o a d d i t i o n a l d r i v e r installation is needed. Using the SuperSpeed USB 3.0 to SATA 2.5" Tool-less Enclosure An additional dr...

Page 10 - Double click the; Safely Remove Hardware; icon located in the system tray by the system; Mass Storage Device; You can now unplug or turn off the

1 0 Windows XP / Server 2003 1 . Double click the Safely Remove Hardware icon located in the system tray by the system clock. 2 . Highlight Mass Storage Device , click Stop , OK, OK , and then Close . 3 . You can now unplug or turn off the SuperSpeed USB 3.0 to SATA 2.5" Tool-less Enclosure .

Page 11 - Technical Support and Warranty

1 1 Technical Support and Warranty QUESTIONS? SIIG ’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit...