SIIG 04-0743A - Manuals - manualsarea.com

Page 2 - Package Contents; Spare low profile bracket; Layout

2 Package Contents • DP SATA 6Gb/s 2-Port PCIe adapter • Spare low profile bracket • SATA data cable • Driver CD • Quick installation guide Layout Figure 1: DP SATA 6Gb/s 2-Port PCIe Port 1A Port 2A Serial ATA Connector Hard Disk LED Pins (connect horizontally)

Page 3 - Hardware Installation

3 Hardware Installation For Low profile systems, install the spare lowprofile bracket now.General instructions for installing the card areprovided below. Since the design of computercases and motherboards vary, refer to yourc o m p u t e r ’ s r e f e r e n c e m a n u a l f o r f u r t h e rinforma...

Page 4 - Device Connection; Note; : For hard drives with both SATA

4 5 . To install the card, carefully align the card'sbus connector with the selected PCI Expressslot on the motherboard. Push the boarddown firmly, but gently, until it is wellseated. 6 . Replace the slot bracket holding screw tosecure the card. Device Connection The DP SATA 6Gb/s 2-Port PCIe is a d...

Page 5 - Connect one end of the Serial ATA cable to; Attach the other end of the Serial ATA data; Software Installation

5 3 . Connect one end of the Serial ATA cable to the hard disk drive. Serial ATA Power Figure 2. SATA hard disk drive connections 4 . Attach the other end of the Serial ATA data cable to the Serial ATA connector on the DPSATA 6Gb/s 2-Port PCIe. 5 . Follow the same instructions to connect the s e c o...

Page 12 - : Do not remove the floppy diskette

1 2 Server 2003 (32-bit) For A New InstallationA new installation requires a floppy disk for thedriver installation. To make this floppy disk,copy the contents of the 32bit folder, found onthe driver CD, onto a blank floppy disk thenfollow the directions below. 1 . Install the board and follow Micro...

Page 13 - Press Enter again to finish the driver; Install the board and boot up Windows.; At the Found New Hardware window,

1 3 6 . Press Enter again to finish the driver installation, then follow the on-screeninstructions to complete your Windowsinstallation. For Existing Installation1 . Install the board and boot up Windows. 2 . At the Found New Hardware window, click Cancel. 3 . Insert driver CD, click Start menu, Run...

Page 18 - To Verify Windows Installation; For Windows XP / Server 2003: Right click; click Manage, click Device; F o r W i n d o w s S e r v e r 2 0 0 8 : R i g h t c l i c k; . A s m e d i a 1 0 6 x S A T A; For Windows XP / Server 2003: Double click

1 8 To Verify Windows Installation 1 . Use Device Manager to verify installation.For Windows 7: Right click Computer, click Manage , click Device Manager. For Windows Vista: Right click Computer, click Manage, click Continue. Click DeviceManager . For Windows XP / Server 2003: Right click My Compute...

Page 19 - Technical Support and Warranty

1 9 Technical Support and Warranty QUESTIONS? SIIG ’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support. Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away.You can also submit q...