SIIG 04-0541A - Manuals

SIIG 04-0541A – Manual in PDF format online.

Manuals:

Manual SIIG 04-0541A

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8

Summary

Page 2 - Caution; INSTALLATION AND OPERATING INSTRUCTIONS; Hardware Kit

Caution A G B H C I D J E K F L (×4) M8×16 screw (×4) M6×16 screw (×4) M8×80 bolt (×4) M5×35 screw (×4) Concrete anchor (×4) M8×35 screw (x2) Sponge sticker (×4) M6×35 screw (×4) M8 spacer When mounting to a wall that contains wood studs, confirm dead center of the wood stud prior to installation, i...

Page 3 - a) Wood Stud Installation; You should mark two positions total.; Step 1: Wall Plate Installation; Phillips head screw driver

1 2 3 4 5 3 4 5 7 8 a) Wood Stud Installation You should mark two positions total. Stud finder for drywall installation NOTE: When mounting to wood studs, the two wood studs must be a minimum of 16" apart. Use a high-quality electronic stud finder (commercially available) to locate dead center o...

Page 4 - NOTE: The concrete anchors must be used for concrete installation.; Do not tighten until all bolts are in place.

2 3 4 5 6 7 8 9 NOTE: The concrete anchors must be used for concrete installation. If necessary, a hammer can be used to lightly tap each anchor into place so that they are flush with the wall. CAUTION: Do not over-tighten bolts - doing so may cause unnecessary damage to the wall. CAUTION: Do not re...

SIIG Manuals