SIIG 04-0343C - Manuals - manualsarea.com

Page 2 - Package Contents; CyberPro PCI 4S board; Layout; * Note: Make this connection only when two or

2 Package Contents • CyberPro PCI 4S board • 4-port fan-out cable • Low profile bracket (Dual Profile board only) • Driver CD • Quick installation guide Layout Full profile bracket 4-pin power connector (optional)* J P 1 (S1) J P 4 (S4) J P 2 (S2) J P 3 (S3) 44-pin connector Figure 1. Layout * Note:...

Page 3 - Hardware Installation

3 Fan-out Cable 44-pin connector Serial ports DB9 (9-pin) Figure 2. Fan-out cable Hardware Installation General instructions for installing the card are provided below. Since the design of computer cases and motherboards vary, refer to your computer’s reference manual for further information, if nee...

Page 4 - Driver Installation; CyberPro PCI 4S drivers.; Copying Files dialog box appears, type in

4 5. Set JP1-JP4 jumper settings to the desired voltage only if your serial device(s) needs additional power from the serial port. However, most serial devices do not require additional power. For more information, see Figure 1 on page 2. Skip this step if power is not required. 6. To install the ca...

Page 5 - Windows ME; CyberPro 4S PCI board and PCI Function should

5 Windows 98/98SE 1. At the Add New Hardware Wizard, click Next. 2. Select Search for the best driver for your device (Recommend), then click Next. 3. Insert the driver CD, check Specify a location, uncheck the other boxes, , type in D:\9x, then click Next. (Change D: to match your CD-ROM drive lett...

Page 6 - To Verify Windows NT 4.0 Installation

6 Windows NT 4.0 1. From the desktop click Start, then Run. 2. I n s e r t t h e d r i v e r C D , t y p e i n D:\NT4\Install_serial.exe, then click OK. (Change D: to match your CD-ROM drive letter) 3. Click Next when the Welcome window appears. 4. Select Install, then click Next. 5. Click Yes, then...

Page 8 - Windows Vista; Note: Windows Vista driver installation process; To Verify Windows Vista Installation; CyberPro 4S PCI board should be displayed.

8 2. Click on the + (plus sign) in front of Ports (COM & LPT), and CyberSerial PCI 16Cxxx... should be displayed four times. 3. Double click Multifunction adapters, SIIG CyberPro 4S PCI board should be displayed. To Verify Windows 2000/XP/Server 2003Installation 1. Right click My Computer, click...

Page 9 - Changing COM Port Address; CyberSerial PCI serial port you want to change.

9 Changing COM Port Address Some serial devices need a specific COM port in order to work. If your serial device works properly, do not change this setting. Windows 95/98/98SE/ME 1. From the Device Manager window double click Ports (COM & LPT), then double click the CyberSerial PCI serial port y...

Page 10 - Blank Page

Page 11 - Technical Support and Warranty

11 Technical Support and Warranty QUESTIONS? SIIG ’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support. Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit q...