Makita XRH03Z - Manuals

5 FUNCTIONAL DESCRIPTION CAUTION: • Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge 1 2 3 008829 • Always switch off the tool before insertion or removal of the battery cartr...

6 • When not operating the tool, always set the reversing switch lever to the neutral position. Selecting the action mode Rotation with hammering 1 2 3 007575 For drilling in concrete, masonry, etc., depress the lock button and rotate the action mode changing knob to the symbol. Use a tungsten-carbi...

7 1 2 001296 Insert the bit into the tool. Turn the bit and push it in until it engages. 1 2 007342 If the bit cannot be pushed in, remove the bit. Pull the chuck cover down a couple of times. Then insert the bit again. Turn the bit and push it in until it engages. After installing, always make sure...

8 attached to is as follows. Bit diameter Dust cup 5 6 mm - 14.5 mm Dust cup 9 12 mm - 16 mm 006382 OPERATION Hammer drilling operation 008833 Set the action mode changing knob to the symbol. Position the bit at the desired location for the hole, then pull the switch trigger. Do not force the tool. ...

9 Use the optional drill chuck assembly. When installing it, refer to "Installing or removing the bit" described on the previous page. Set the action mode changing knob so that the pointer points to the symbol. CAUTION: • Never use "rotation with hammering" when the drill chuck assem...