Page 2 - Notice
2 Notice The information contained in this document is subject to change withoutnotice. HEWLETT-PACKARD MAKES NO WARRANTY OF ANY KIND WITHREGARD TO THE MATERIAL, INCLUDING, BUT NOT LIMITED TOTHE IMPLIED WARRANTIES OF MERCHANTABILITY ANDFITNESS FOR A PARTICULAR PURPOSE. Hewlett-Packard shall notbe li...
Page 3 - Printing History; First Edition
Printing History The Printing History below identifies the edition of this manual and anyupdates that are included. Periodically, update packages are distributedwhich contain replacement pages to be merged into the manual,including an updated copy of this printing history page. Also, the updatemay c...
Page 4 - About This Manual
4 About This Manual The HP 9000 family of products embraces the D Class Enterprise Serverline which includes Series 800t, a NEBS-compatible version. Thisdocument explains how to install the seismic rack and DC power supplywhich provide NEBS compatibility for the system.
Page 5 - Contents; Addendum to D Class Enterprise Servers System Installation
Contents 5 1. Addendum to D Class Enterprise Servers System Installation Guide Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Purpose of this Addendum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Tools...
Page 8 - • Purpose of this Addendum
8 Chapter 1 Addendum to D Class Enterprise Servers System Installation Guide Contents Contents • Purpose of this Addendum • Seismic Rack Kit • Installation • DC Power Supply
Page 9 - Purpose of this Addendum; • Earthquake mounting of an HP9000 Series 800t D Class Server in a; Tools Needed; • Star-point Torx drivers, size 15 and 25
Chapter 1 9 Addendum to D Class Enterprise Servers System Installation Guide Purpose of this Addendum Purpose of this Addendum This addendum provides information and procedures for installation of aHewlett-Packard 9000 Series 800t D Class Server in a Central Office. Itprovides information about diff...
Page 10 - Seismic Rack Kit; Earthquake Rack-Mount Components; Assembly, Panel Latch
10 Chapter 1 Addendum to D Class Enterprise Servers System Installation Guide Seismic Rack Kit Seismic Rack Kit The HP 9000 Series 800t D Class Server can be fitted with a seismic rackmount kit for installation in a 19-inch open relay rack. This earthquakerack fulfills Bellcore requirements for Tele...
Page 11 - Ass’y, Cable Retractor
Chapter 1 11 Addendum to D Class Enterprise Servers System Installation Guide Seismic Rack Kit Split Lock Washer, #12 10 17 2190-0631 Flat Washer, #12 10 18 3050-0103 Screw 10-32 x, 38” Torx Pan 28 19 2680-0281 Flat Washer, #10 8 20 3050-0226 Nut w/lock, 10-32 8 21 2740-0003 Screw, 6-32 thread-formi...
Page 12 - Site Hazard Considerations
12 Chapter 1 Addendum to D Class Enterprise Servers System Installation Guide Seismic Rack Kit Site Hazard Considerations Hewlett Packard recommends the following environmental andmechanical factors for review and compliance prior to installation ofequipment. 85° F T mra - Manufacturer’s maximum rec...
Page 13 - Installation; Unpack the rack-mount kit and check the hardware, using the parts
Chapter 1 13 Addendum to D Class Enterprise Servers System Installation Guide Installation Installation Install the seismic rack kit and the HP 9000 Series 800t D Class Serverinto an open relay rack using the following steps. References to itemnumbers in these steps pertain to the item numbers liste...
Page 14 - D Class Server
14 Chapter 1 Addendum to D Class Enterprise Servers System Installation Guide Installation Figure 1-1 Seismic Rack Installation 5. Attach the right and left main bracket panels (items 2, 3 in Figure 1-2 on page 15) to the vertical mounting rails of the relay rack, usinghardware item 24, Table 1-1 on...
Page 19 - alignment of top cover (refer to Step 10) and tighten all fasteners.; Seismic Rack Installation; mounts attached to the rack.
Chapter 1 19 Addendum to D Class Enterprise Servers System Installation Guide Installation 18. Attach the latch panel (item 4) to front of mounting tray using five screws. 19. With the computer securely engaged within the rack assembly, check alignment of top cover (refer to Step 10) and tighten all...
Page 21 - DC Power Supply; WARNING; Connections; CAUTION
Chapter 1 21 Addendum to D Class Enterprise Servers System Installation Guide DC Power Supply DC Power Supply The HP 9000 Series 800t D Class Server contains a NEBS-compatibledirect current (DC) power supply, rather than the alternating current(AC) power supply furnished with the standard HP 9000 D ...
Page 23 - Safety Grounding Procedures; Front
Chapter 1 23 Addendum to D Class Enterprise Servers System Installation Guide DC Power Supply NOTE To protect the equipment from overload or short circuits that may causeequipment damage or fire, the power supply is fused internally. Foradded safety and integrity in the Central Office, the circuit w...
Page 24 - Specifications; DC Power Specifications; Input
24 Chapter 1 Addendum to D Class Enterprise Servers System Installation Guide DC Power Supply Specifications Replacement Power Supply To order a replacement DC Power Supply, order replacement partnumber Z7634-67003. Table 1-3 DC Power Specifications Specification Data Input -48V, 20A max under full ...
Page 25 - Regulatory/Safety Statements
Page 26 - Appendix A
26 Appendix A Regulatory/Safety Statements FCC Statement (USA Only) FCC Statement (USA Only) The Federal Communications Commission (in 47 CFR 15.105) hasspecified that the following notice be brought to the attention of the usersof this product. This equipment has been tested and found to comply wit...
Page 27 - International; Spécification ATI Classe A (France seulement); Le formulaire à utiliser est disponible auprès des préfectures.
Appendix A 27 Regulatory/Safety Statements International International VCCI Class A Statement (Japan Only) Spécification ATI Classe A (France seulement) DECLARATION D'INSTALLATION ET DE MISE EN EXPLOITATIONd'un matériel de traitement de l'information (ATI), classé A en fonctiondes niveaux de perturb...
Page 28 - At bystander position per ISO 7779.; Geräuschemission; Die Daten sind die Ergebnisse von Typprüfungen an
28 Appendix A Regulatory/Safety Statements International Arrêté du 27 Mars 1993, publié au J.O. du 28 Mars - ATI Product Noise Declaration (Germany Only) Acoustic Noise Emissions LpA: 57 dB At bystander position per ISO 7779. All data are the results from type tests of the product configurationhavin...
Page 29 - EMC Regulatory; EMC Certification; Safety Certification
Appendix A 29 Regulatory/Safety Statements EMC Regulatory EMC Regulatory EMC Certification prEN 55024-2prEN 55024-3prEN 55024-4For USA, FCC Class A, part 15For Europe, CISPR-22 Level AFor Japan, VCCI Class A EMC Labels CE MarkFCC StatementCanadian EMC StatementJapanese VCCI Statement Safety Safety C...
Page 30 - Hewlett-Packard Company; Manufacturer’s Address:; PA-RISC Computer System; conforms to the following Product Specifications:; kV Power Lines; Supplementary Information:; Frank Dembski, Quality Manager
30 Appendix A Regulatory/Safety Statements EMC Regulatory DECLARATION OF CONFORMITY according to ISO/IEC Guide 22 and EN 45104 Manufacturer’s Name: Hewlett-Packard Company Manufacturer’s Address: 8000 Foothills Blvd.Roseville, CA 95747, USA declares that the product: Product Name: PA-RISC Computer S...
