Page 3 - Safety warning notice
Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the device, do not place the device directly on your lap or obstruct the device air vents. Use the device only on a hard,flat surface. Do not allow another hard surface, such as an adjoining optional ...
Page 5 - Table of contents
Table of contents 1 Product description ........................................................................................................................................ 1 2 External component identification ........................................................................................
Page 9 - Product description
1 Product description Category Description Intel HM70 computer model Intel HM77 with internal graphics (UMA) computer model Intel HM77 with discrete graphics computer model AMD A68M computer model ProductName HP Pavilion Sleekbook 14 √ √ √ √ HP Pavilion Ultrabook 14 √ √ Processors 3rd Generation Int...
Page 15 - External component identification
2 External component identification Display Component Description (1) WLAN antennas (2)* Send and receive wireless signals to communicate with wirelesslocal area networks (WLANs). (2) Webcam light On: The webcam is in use. (3) HP TrueVision HD Webcam Records video, captures still photographs, and al...
Page 16 - Top; TouchPad
Top TouchPad Component Description (1) TouchPad light (not supported on UbuntuLinux) ● Amber: The TouchPad is off. ● Off: The TouchPad is on. (2) TouchPad on/off button (not supported onUbuntu Linux) Turns the TouchPad on or off. (3) TouchPad zone Moves the on-screen pointer and selects or activates...
Page 17 - Lights
Lights Component Description (1) Power light ● White: The computer is on. ● Blinking white: The computer is in the Sleep (Suspend)state, which is an energy-saving mode. The computershuts off power to the display and other unneededcomponents. ● Off: The computer is off or in Hibernation. Hibernationi...
Page 18 - Buttons and speakers
Buttons and speakers Component Description (1) Power button ● When the computer is off, press the button to turn onthe computer. ● When the computer is in the Sleep (Suspend) state,press the button briefly to exit that state. ● When the computer is in Hibernation, press the buttondown briefly to exi...
Page 19 - Keys
Keys Component Description (1) esc key Displays system information when pressed in combinationwith the fn key (for Windows computer models). (2) fn key Displays system information when pressed in combinationwith the esc key (for Windows computer models). (3) Operating system key For Windows computer...
Page 20 - Left side
Left side Component Description (1) Security cable slot Attaches an optional security cable to the computer. NOTE: The security cable is designed to act as a deterrent, but it may not prevent the computer from beingmishandled or stolen. (2) Vent Enables airflow to cool internal components. NOTE: The...
Page 24 - Illustrated parts catalog; Service label
3 Illustrated parts catalog Service label When ordering parts or requesting information, provide the computer serial number and modeldescription provided on the service label. The service label is located on the bottom of the computer. NOTE: Your label may look slightly different from the illustrati...
Page 30 - Display assembly subcomponents
Display assembly subcomponents Item Component Spare part number (1) Display bezel 697907-001 (2) Display Hinge Kit (includes left and right display hinges and brackets) 697908-001 (3) 35.6 cm (14.0 in), HD, WLED, SVA BrightView flat display panel 698523-001 (4) Webcam/microphone module 697903-001 (5...
Page 37 - Removal and replacement procedures; Tools required; Service considerations; Plastic parts
4 Removal and replacement procedures Preliminary replacement requirements Tools required You will need the following tools to complete the removal and replacement procedures: ● Flat-bladed screwdriver ● Magnetic screwdriver ● Phillips P0 and P1 screwdrivers Service considerations The following secti...
Page 38 - Drive handling; Grounding guidelines; Electrostatic discharge damage
Drive handling CAUTION: Drives are fragile components that must be handled with care. To prevent damage to the computer, damage to a drive, or loss of information, observe these precautions: Before removing or inserting a hard drive, shut down the computer. If you are unsure whetherthe computer is o...
Page 41 - Component replacement procedures
Equipment guidelines Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation. ● When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexiblestraps with a minimum of one megohm ±10% resistance in the ground cords. To provide properg...
Page 43 - Battery
Battery Description Spare part number 4 cell, 37 Whr, 2.55 Ah Li-ion battery 695192-001 Before disassembling the computer, follow these steps: 1. Shut down the computer. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the po...
Page 44 - Computer feet
2. Reset the battery release lock (2) to the locked position. Computer feet Description Spare part number Rubber Feet Kit 697906-001 The computer feet are adhesive-backed rubber pads. There are 5 rubber feet that attach tothe base enclosure in the locations illustrated below. 36 Chapter 4 Removal an...
Page 45 - Display panel
Display panel Description Spare part number Display bezel 697907-001 35.6 cm (14.0 in), HD, WLED, SVA BrightView flat display panel 698523-001 IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement. Before removing the display panel, follow these s...
Page 51 - Top cover
Reverse this procedure to install the keyboard. Top cover NOTE: The top cover spare part kit includes the TouchPad support, TouchPad board and TouchPad cable. Description Spare part number Ruby red top cover 697920-001 Sparkling black top cover 698488-001 IMPORTANT: Make special note of each screw a...
Page 53 - Power button board
6. Gently lift around the edges of the top cover (1) and lift to remove the top cover (2) . When replacing the top cover, be sure that the following components are removed from the defectivetop cover and installed on the replacement top cover: ● Power button board and cable (see Power button board o...
Page 55 - Hard drive
Hard drive NOTE: The hard drive spare part kit does not include the hard drive cable, or hard drive bracket and screws. Description Spare part number 9.5 mm (0.37 in) × 6.35 cm (2.50 in) SATA 1 TB, 5400 rpm 676521-005 750 GB, 7200 rpm 633252-005 750 GB, 5400 rpm 634250-005 640 GB, 5400 rpm 669300-00...
Page 59 - WLAN module
WLAN module Description Spare part number Intel Centrino Wireless-N 2230 802.11 b/g/n 2×2 WiFi and Bluetooth 4.0 combination adapter, for use with computer models with Intel processors 670290-005 Qualcomm Atheros AR9485 802.11 b/g/n 1×1 WiFi Adapter 675794-005 Qualcomm Atheros AR9565 802.11 b/g/n 1×...
Page 62 - System board
System board NOTE: The processor is included on the system board. The system board Thermal Material Kit, part number 680571-001, includes replacement thermalpaste and pads. Description Spare part number System boards supporting switchable discrete graphics and Intel processors For use with computer ...
Page 67 - Memory module
Memory module WARNING! To reduce the risk of electric shock and damage to the equipment, unplug the power cord and remove all batteries before installing a memory module. CAUTION: Electrostatic discharge (ESD) can damage electronic components. Before beginning any procedure, ensure that you are disc...
Page 70 - RTC battery
RTC battery Description Spare part number RTC battery 697917-001 IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement. Before removing the RTC battery, follow these steps: 1. Shut down the computer. 2. Disconnect all external devices connected to...
Page 71 - mSATA solid-state drive
mSATA solid-state drive Description Spare part number mSATA solid-state drive, 32 GB drive (for use with computer models with Intel Core processors, not supported on Ubuntu Linux) 698524-001 IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement. B...
Page 74 - Heat sink
Heat sink Description Spare part number UMA graphics heat sink 697915-001 Switchable discrete graphics heat sink 697916-001 IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement. Before removing the heat sink, follow these steps: 1. Shut down the ...
Page 76 - Fan
c. Loosen the captive screws (1) and lift the UMA graphics heat sink (2) from the system board. d. Thoroughly clean the thermal connections (1) on the system board and the heat sink (2) before replacing a heat sink onto a system board. 3. Reverse this procedure to replace the heat sink. Replace the ...
Page 77 - Speaker assembly
3. Disconnect the power from the computer by first unplugging the power cord from the AC outletand then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 35 ). 5. Remove the keyboard (see Keyboard on page 39 ). 6. Remove the top cover (see Top cover on page 43 )...
Page 79 - Display assembly
3. Disconnect the power from the computer by first unplugging the power cord from the AC outletand then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 35 ). 5. Remove the keyboard (see Keyboard on page 39 ). 6. Remove the top cover (see Top cover on page 43 )...
Page 83 - Power connector
b. Detach and release the display panel cable (it is attached to the display enclosure withdouble-sided tape), and remove the cable (2) . 5. If it is necessary to replace the wireless antenna cables and transceivers: a. Release the wireless antenna cables from the clips (1) built into the display en...
Page 85 - Updating the BIOS; Determining the BIOS version
5 Windows 8 – Using Setup Utility (BIOS)and System Diagnostics Setup Utility, or Basic Input/Output System (BIOS), controls communication between all the input andoutput devices on the system (such as disk drives, display, keyboard, mouse, and printer). SetupUtility (BIOS) includes settings for the ...
Page 86 - Downloading a BIOS update
Downloading a BIOS update CAUTION: To reduce the risk of damage to the computer or an unsuccessful installation, download and install a BIOS update only when the computer is connected to reliable external power using theAC adapter. Do not download or install a BIOS update while the computer is runni...
Page 87 - Using System Diagnostics
Using System Diagnostics System Diagnostics allows you to run diagnostic tests to determine if the computer hardware isfunctioning properly. To start System Diagnostics: 1. Turn on or restart the computer, quickly press esc , and then press f2 . 2. Click the diagnostic test you want to run, and then...
Page 88 - Changing the language of Setup Utility; Navigating and selecting in Setup Utility
6 Ubuntu Linux – Using Setup Utility(BIOS) and System Diagnostics Setup Utility, or Basic Input/Output System (BIOS), controls communication between all the input andoutput devices on the system (such as disk drives, display, keyboard, mouse, and printer). SetupUtility includes settings for the type...
Page 91 - Using Advanced System Diagnostics
NOTE: After a message on the screen reports a successful installation, you can delete the downloaded file from your hard drive. Using Advanced System Diagnostics Advanced System Diagnostics allows you to run diagnostic tests to determine if the computerhardware is functioning properly. The following...
Page 92 - Specifications; Computer specifications
7 Specifications Computer specifications Metric U.S. Dimensions: Width 34.7 cm 13.67 in Depth 23.8 cm 9.37 in Height (front to back) 2.1 cm .83 in Weight: 1.8 kg 3.96 lbs Input power Operating voltage and current 18.5 V dc @ 3.5 A or 19.5 V dc @ 3.33 A – 65 W Temperature Operating (writing to optica...
Page 93 - Hard drive specifications
35.6 cm (14.0 in), display specifications Metric U.S. Dimensions Width 32.4 cm 12.8 in Height 19.3 cm 7.6 in Diagonal 35.6 cm 14.0 in Number of colors 262K (6 bit) Contrast ratio 500:1 (typical) Brightness 200 cd/m 2 (nits) (typical) Backlight WLED Total power consumption 3.2 W (max) Viewing angle ±...
Page 94 - Creating recovery media and backups
8 Windows 8 – Backing up, restoring,and recovering Your computer includes tools provided by HP and the operating system to help you safeguard yourinformation and retrieve it if you ever need to. These tools will help you return your computer to aproper working state or even back to the original fact...
Page 95 - Creating HP Recovery media
choose to reset the computer by reinstalling Windows or choose to recover using HP RecoveryManager. NOTE: File History is not enabled by default, so you must turn it on. For more information and steps for enabling Windows File History, see Windows Help andSupport. From the Start screen, type h , and...
Page 96 - Restore and recovery
Restore and recovery There are several options for recovering your system. Choose the method that best matches yoursituation and level of expertise: ● If you need to restore your personal files and data, you can use Windows File History to restoreyour information from the backups you created. For mo...
Page 98 - Recovering using HP Recovery Manager; What you need to know
3. Click Change PC settings in the bottom-right corner of the screen, and then select General from the PC settings screen. 4. Under Remove everything and reinstall Windows , select Get started , and follow the on- screen instructions. Recovering using HP Recovery Manager HP Recovery Manager software...
Page 99 - Using HP Recovery media to recover; Changing the computer boot order; Removing the HP Recovery partition
Using HP Recovery media to recover You can use HP Recovery media to recover the original system. This method can be used if yoursystem does not have an HP Recovery partition or if the hard drive is not working properly. 1. If possible, back up all personal files. 2. Insert the first HP Recovery disc...
Page 100 - Performing a system recovery; Creating the restore DVDs
9 Ubuntu Linux – Backing up, restoring,and recovering Recovery after a system failure is as good as your most recent backup. As you add new software anddata files, you should continue to back up your system on a regular basis to maintain a reasonablycurrent backup. Performing a system recovery The D...
Page 101 - Performing recovery using the restore media; Backing up your information
To create the restore image: 1. Click the System menu icon at the far right of the top panel, and then click System Settings > Backup . 2. Select Storage from the panel on the left side of the window, click the down-arrow next to Backup location , and select the USB device from the drop-down list...
Page 103 - 0 Power cord set requirements; Requirements for all countries
10 Power cord set requirements The wide-range input feature of the computer permits it to operate from any line voltage from 100 to120 V ac, or from 220 to 240 V ac. The 3-conductor power cord set included with the computer meets the requirements for use in thecountry or region where the equipment i...
Page 104 - Requirements for specific countries and regions
Requirements for specific countries and regions Country/region Accredited agency Applicable note number Argentina IRAM 1 Australia SAA 1 Austria OVE 1 Belgium CEBEC 1 Brazil ABNT 1 Canada CSA 2 Chile IMQ 1 Denmark DEMKO 1 Finland FIMKO 1 France UTE 1 Germany VDE 1 India ISI 1 Israel SII 1 Italy IMQ ...
Page 107 - Index
Index A AC adapter lights 14spare part number 23, 24, 28 action keys identifying 11 Advanced System Diagnostics using for Ubuntu Linux computer models 83 antenna removal 75spare part number 22, 26, 71 Antenna Kit spare part number 22, 26, 71 applications key, identifying 11audio, product description...
