Page 2 - Notice; is a trademark of Intel Corporation.
Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not ...
Page 3 - Connecting to a Netware 3.12 Server; Windows for; Vectra VL8
1 Connecting to a Netware 3.12 Server Windows for Workgroups Version 3.11 1 Connecting to a Netware 3.12 Server Windows for Workgroups Version 3.11 Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • Intel EtherExpress Pro 10+ ISA 10MBS Ethernet adapter card and drivers...
Page 5 - Intel EtherExpress TM PRO/10
1 Connecting to a Netware 3.12 Server Windows for Workgroups Version 3.11 ❒ C:\NOVELL\CLIENT32 ❒ C:\WINDOWS ❒ 16-bit LAN drivers ❒ Intel EtherExpress ™ PRO/10 15 Press “F10” to save and continue. 16 When prompted, insert the corresponding disks to complete file transfer and driver installation. 17 W...
Page 7 - Connecting to a Netware 3.12 Server; Requirements
1 Connecting to a Netware 3.12 Server Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2 installed. • Intel EtherExpress Pro 10+ ISA Ethernet card and drivers disk. • Driver Name for Vectra VL8 and VE7/VE8: NETPRO.INF Size: 12KB Date: 4/25/97. • Driver Name for Vectra VL7: EP...
Page 9 - Click on “Close” button, and files will copy.
1 Connecting to a Netware 3.12 Server Windows 95 SR2 15 Click on “Close” button, and files will copy. 16 When prompted for the file “NETAPI.DLL”, set the path to your Windows 95 files and click “OK.” (For HP preloaded HDD’s, set the path to C:\WIN95.SR2\) 17 Click on the “Yes” button to finish the i...
Page 11 - Connecting to a Netware 4.11 Server
2 Connecting to a Netware 4.11 Server Windows for Workgroups Version 3.11 2 Connecting to a Netware 4.11 Server Windows for Workgroups Version 3.11 Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • Intel EtherExpress Pro 10+ ISA 10MBS Ethernet adapter card and drivers...
Page 15 - Connecting to a Netware 4.11 Server
2 Connecting to a Netware 4.11 Server Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2 installed. • Intel EtherExpress Pro 10+ ISA Ethernet card and drivers disk Ver. 3.5. • Vectra VL8 and VE7/VE8 Driver Name: NETPRO.INF Size: 12KB Date: 4/25/97 • Vectra VL7 Driver Name: EP...
Page 19 - Connecting to a Windows NT Server 3.51
3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Version 3.11 3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Version 3.11 Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • Intel EtherExpress Pro 10+ ISA Ethernet adapter card and drivers...
Page 20 - Windows for Workgroups Version 3.11; Remove the Intel drivers diskette and reboot the machine.
Windows for Workgroups Version 3.11 7 Remove the Intel drivers diskette and reboot the machine. 8 After Windows loads, open the “NETWORK” program group, and double-click the “Network Setup.” 9 Select the “Networks” button in the “Network Setup” dialog box. 10 Click on the “Install Microsoft Windows ...
Page 23 - Connecting to a Windows NT Server 3.51
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2 • Intel EtherExpress PRO 10+ ISA Ethernet card and drivers disk. • Driver Name: PROW95.VXD Size: 6K Date: 8/7/96 • Microsoft Windows NT Server 3.51 machine that supports Net BEUI,TCP/I...
Page 24 - Click “OK” to the “Network” dialog box to provide computer / work group
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 If you are using a Vectra VE7/VE8, follow the instructions below to complete the procedure. If you are using a VL8 or VL7, go directly to step 9. a Click on "Start" then "Settings" and open the "Control Panel." b Double-...
Page 27 - Windows NT
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 Windows NT Workstation Version 3.51 Requirements • HP Vectra with Microsoft Windows NT Workstation 3.51 installed. • Intel EtherExpress Pro 10+ ISA Ethernet card and drivers disk. • Driver Name: EPRO.SYS Size: 10KB Date: 4/...
Page 28 - Select the “Network” icon, and click “YES” to install NT networking.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 on “Control Panel.” 9 Select the “Network” icon, and click “YES” to install NT networking. 10 Insert the Windows NT Workstation CD. 11 In the “Windows NT Setup”, set the path to your NT files, and click on the “Continue” bu...
Page 32 - When “Windows NT is now ready to start the network...” click on “Next.”
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 4.0 25 When “Windows NT is now ready to start the network…” click on “Next.” 26 Specify your Computer Name, Workgroup or Domain and click on “Next.” (If you do not have the required information, contact your network administrato...
Page 34 - Connecting to a Windows NT Server 4.0
4 Connecting to a Windows NT Server 4.0 Windows for Workgroups Version. 3.11 4 Connecting to a Windows NT Server 4.0 Windows for Workgroups Version. 3.11 Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • Intel EtherExpress Pro 10+ ISA Ethernet adapter card and drivers...
Page 37 - Connecting to a Windows NT Server 4.0
4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2. • Intel EtherExpress PRO 10+ ISA Ethernet card and drivers disk. • Driver Name: PROW95.VXD Size: 6K Date: 8/7/96 • Microsoft Windows NT Server 4.0 machine that supports Net BEUI,TCP/IP...
