HP L5006TM - Manuals

HP Compaq L5009tm Touchscreen ● Maximum resolution of XGA 1024 x 768. Compatible with VGA, SVGA and XGA (non-interlace)color video cards ● Integrated Acoustic Pulse Recognition (APR) technology from the Elo TouchSystems business ofTyco Electronics Corporation ● Sealed touchscreen responds to touch w...

2 Safety and Maintenance Guidelines Important Safety Information A power cord is included with the monitor. If another cord is used, use only a power source andconnection appropriate for this monitor. For information on the correct power cord set to use with themonitor, refer to the Power Cord Set R...

Maintenance Guidelines To enhance the performance and extend the life of the monitor: ● Do not open the monitor cabinet or attempt to service this product yourself. Adjust only thosecontrols that are covered in the operating instructions. If the monitor is not operating properly orhas been dropped o...

3 Setting Up the Monitor To set up the monitor, ensure that the power is turned off to the monitor, computer system, and otherattached devices, then follow the instructions below. Identifying Rear Connectors Figure 3-1 Rear Connectors Connector Function 1 AC Power Connects the AC power cord to the m...

Connecting the Cables NOTE: For the L5009tm model, it is best to install the APR driver before connecting the hardware. 1. Place the monitor in a convenient, well-ventilated location near the computer. 2. Connect one end of the power cable (1) to the AC power connector on the back of the monitor,and...

Installing the Serial or USB Touch Drivers The Touch driver software can be downloaded from the Web or from the HP software and documentationCD included with the monitor. Downloading Drivers from the Web 1. Insert the HP software and documentation CD in the computer’s CD-ROM drive. The CD will opent...

Tilting the Monitor For viewing clarity, tilt the monitor forward (up to -5 degrees) or backward (up to 90 degrees). Figure 3-3 Tilting the Monitor CAUTION: In order to protect the monitor, be sure to hold the base when adjusting the LCD, and take care not to touch the screen. Locating the Rating La...

4 Operating the Monitor Installing the Monitor Driver The CD that comes with the monitor contains monitor driver files you can install on your computer: ● an .INF (Information) file ● an .ICM (Image Color Matching) file PDF Complete is supplied on this CD and can be installed from the menu. NOTE: If...

Installing the .INF and .ICM Files After you determine that you need to update, you can install the .INF and .ICM files from the CD ordownload them. Installing from the CD To install the .INF and .ICM files on the computer from the CD: 1. Insert the CD in the computer CD-ROM drive. The CD menu is di...

Front Panel Controls Table 4-1 Monitor Front Panel Controls Control Function 1 Power Turns the monitor on or off. 2 Select Selects the adjustment items from the OSD menus. 3 Enter the brightness adjustment. Decrease value of the adjustment item. Select item counter-clockwise. 4 Enters contrast adjus...

Using the On-Screen Display Use the On-Screen Display (OSD) to display and select OSD menu functions. To access the OSD, dothe following: 1. Press the Menu button on the side panel to activate the OSD menu. 2. Use the up arrow or down arrow controls to move clockwise or counterclockwise through the ...

Icon OSD Control Description OSD Language Selects the language in which the OSD menu is displayed. Information Description Indicates the current resolution, H-Frequency and V-Frequency. NOTE: When adjusting the Clock and Clock Phase values, if the monitor images become distorted, continue adjusting ...

OSD and Power Lock/Unlock The OSD feature can be locked and unlocked. The monitor is shipped with the OSD menu and powerbutton in the unlocked position. To lock the OSD menu: 1. Press the Menu button and up arrow button simultaneously until a window displays "OSD Unlock."Continue to hold the...

A Troubleshooting Solving Common Problems The following table lists possible problems, the possible cause of each problem, and the recommendedsolutions. Problem Possible Cause Solution Screen is blank. Power cord is disconnected. Connect the power cord. Power button on front panel of themonitor is t...

Touchscreen Tips If you experience operational issues with the touchscreen system either during or after installation, usethe tips below to help you determine the source of the problem. ● If “No Elo touchmonitor found” is displayed on the screen, install the latest drivers. Touchmonitorswith the dua...

6. Exit regedit when done. 7. Shut Down and restart the machine. A restart is required before the setting will take effect. A cursor is not visible. To make the cursor visible, first, open Control Panel > Elo Touchscreen > Mode tab. Check if the Hide arrow mouse pointer box is checked; if yes,...

B Technical Specifications NOTE: All performance specifications are provided by the component manufacturers. Performance specifications represent the highest specification of all HP's component manufacturers' typical levelspecifications for performance and actual performance may vary either higher o...

IntelliTouch Surface Acoustic Wave Technology Table B-3 IntelliTouch Specifications Input Method Finger or gloved hand (cloth, leather or rubber) activation. Mechanical Positional Accuracy Standard deviation of error is less than 2.03 mm (0.080 in).Equates to less than ±1%. Touchpoint Density More t...

Acoustic Pulse Recognition Technology Table B-4 APR Specifications Input Method Finger, finger nail, solid stylus or gloved hand (cloth, leather orrubber) activation Mechanical Positional Accuracy 1% maximum error Resolution Accuracy Touchpoint density is based on controllers resolution of 4096x 409...

Recognizing Preset Display Resolutions The display resolutions listed below are the most commonly used modes and are set as factory defaults.This monitor automatically recognized these preset modes and they will appear properly sized andcentered on the screen. HP L5006tm and L5009tm Table B-5 Factor...

Energy Saver Feature When the monitor is in its normal operating mode, the monitor uses less than 21 watts and the Powerlight is green. The monitor also supports a reduced power state. The reduced power state will be entered into if themonitor detects the absence of either the horizontal sync signal...

C Agency Regulatory Notices Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuantto Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmfulinterference in a resid...

Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Germany German Ergonomics Notice HP products which bear the “GS” approval mark, when forming part of a system comprising HP brandcomputers, keyboards and monitors that bear the “GS” approval mark, meet the applicable ergonomic...

Product Environmental Notices Materials Disposal This HP product contains mercury in the fluorescent lamp in the display LCD that might require specialhandling at end-of-life. Disposal of this material can be regulated because of environmental considerations. For disposal orrecycling information, co...

11363-2006 11363-2006 Turkey EEE Regulation In Conformity with the EEE Regulation EEE Yönetmeli ğ ine Uygundur ENWW Product Environmental Notices 31

D Native Resolution The native resolution of a monitor is the resolution level at which the LCD panel is designed to performbest. The native resolution is 1024 x 768 for the 15 inch size. In almost all cases, screen images lookbest when viewed at their native resolution. You can lower the resolution...