HP J9833AABA - Manuals

2 Wall Mounting : Install two 5/8-inch (15.875 mm) Number 12 wood screws, (included) into the mounting surface, positioned 6.3 inches (160 mm) apart. Use the wall anchors if necessary. Then, position the switch over the screws and slide to lock in place. Important: For wall-mounting, the network por...

4 5 . Power on and verify that Self-Test completes normally. The switch does not have a power switch. It is powered on by connecting the AC power adapter supplied with your switch. 6. Configure the switch (minimal configuration). Note: These procedures assume that you have a Dynamic Host Configurati...

5 Managing the Switch via the 192.168.2.10 Address If the switch does not acquire an IP address via the DHCP request, it defaults to the following configuration: To communicate with the switch via the 192.168.2.10 address, follow these procedures: 7. (Optional) Configure trunking (link aggregation) ...