Page 2 - iSCSI SR2122 Storage Router: Getting Started Guide
2 iSCSI SR2122 Storage Router: Getting Started Guide © 2003 Hewlett-Packard development Company, L.P. Hewlett-Packard Company makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hew...
Page 3 - About this Document; Getting Started Guide Information; This Getting Started Guide covers the following major topics:; Intended Audience; The iSCSI SR2122 Storage Router kit also includes:
About this Document 3 iSCSI SR2122 Storage Router: Getting Started Guide About this Document This section describes the content reflected in this document, including: ■ Getting Started Guide Information , page 3 ■ Intended Audience , page 3 ■ Other iSCSI SR2122 Storage Router Documentation , page 3 ...
Page 4 - Figures
About this Document 4 iSCSI SR2122 Storage Router: Getting Started Guide Figures Figure 1:IP/FC Network Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Figure 2:GUI Display of the FC port WWPN . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 5 - iSCSI Protocol
About this Document 5 iSCSI SR2122 Storage Router: Getting Started Guide iSCSI Protocol The SCSI transport protocol iSCSI maps block-oriented (CDB) storage data over TCP/IP networks (through iSCSI PDUs). The iSCSI protocol enables universal access to storage devices and storage-area networks (SANs) ...
Page 6 - iSCSI in a Heterogeneous SAN; For further details please read “; Typical Network Structure; A typical IP/FC network example; iSCSI Initiator; Server; Workstation; Linux; SAN Storage; iSCSI Router
iSCSI in a Heterogeneous SAN 6 iSCSI SR2122 Storage Router: Getting Started Guide iSCSI in a Heterogeneous SAN Although the iSCSI protocol is written as a complete data transport from host to storage this chapter will only discuss the current HP supported topology of iSCSI hosts to Fibre Channel sto...
Page 7 - Connected to the same hosts
iSCSI in a Heterogeneous SAN 7 iSCSI SR2122 Storage Router: Getting Started Guide iSCSI Initiator The IP host, or iSCSI Initiator uses the iSCSI Driver to enable target resource recognition & attachment to the SR2122 over IP. The iSCSI driver is configured with the Gigabit Ethernet IP address of...
Page 8 - Fibre Channel SAN; Please read “
iSCSI in a Heterogeneous SAN 8 iSCSI SR2122 Storage Router: Getting Started Guide Fibre Channel SAN A Storage Area Network is a dedicated, centrally managed, secure information infrastructure, which enables any-to-any interconnection of servers and storage. SANs are built to incorporate the best of ...
Page 9 - SR2122 Hardware and Software Support; Storage Array Hardware Support
SR2122 Hardware and Software Support 9 iSCSI SR2122 Storage Router: Getting Started Guide SR2122 Hardware and Software Support This section lists the hardware, devices, and operating systems that are compatible with this SR2122 Storage Router. Storage Array Hardware Support The following HP Storage ...
Page 10 - Microsoft Initiator Support
SR2122 Hardware and Software Support 10 iSCSI SR2122 Storage Router: Getting Started Guide Microsoft Initiator Support ■ Windows 2000 server only with SP3 ■ Microsoft Windows 2003 ■ MSCS not supported ■ Secure Path & Auto Path not supported ■ IA64 not supported ■ iSNS server not supported Compaq...
Page 11 - ISCSI Host Rules; Table 2: iSCSI Host Rules
SR2122 Configuration Rules 11 iSCSI SR2122 Storage Router: Getting Started Guide SR2122 Configuration Rules SR2122 Router Rules ■ The SR2122’s 2 nd fibre Channel port (FC2) is not supported as a redundant SAN port for FC1. ■ Direct connect of the SR2122 FC ports to any HP storage array is not suppor...
Page 12 - Storage Array Rules; Read “; Fibre Channel Switch/Fabric Rules; CIM 7 Supports the SR2122’s SNMP management capabilities.
SR2122 Configuration Rules 12 iSCSI SR2122 Storage Router: Getting Started Guide Storage Array Rules ■ The HSG80 is supported in both SCSI-3 Transparent Failover Mode and Multibus Failover Mode. ■ Without HP Secure Path the Enterprise Virtual Array is supported with the SR2122 accessing only one EVA...
Page 13 - Configuring the SR2122 iSCSI Storage Router in a SAN; standalone router to preserve its configuration.; HP StorageWorks iSCSI storage router
Configuring the SR2122 iSCSI Storage Router in a SAN 13 iSCSI SR2122 Storage Router: Getting Started Guide Configuring the SR2122 iSCSI Storage Router in a SAN Configuring the SR2122 in a SAN takes on five distinct steps or sections: ■ Setup/configuration of the SR2122 itself ■ Adding the SR2122 to ...
Page 14 - Figure 2: GUI Display of the FC port WWPN; Adding a Standalone SR2122 to a SAN; Standalone SR2122 examples:
Configuring the SR2122 iSCSI Storage Router in a SAN 14 iSCSI SR2122 Storage Router: Getting Started Guide To find the WWPN of a FC ports using the SR2122’s GUI, click on the FC port in the Monitor window: Figure 2: GUI Display of the FC port WWPN Adding a Standalone SR2122 to a SAN The two SR2122 F...
Page 15 - Adding a Clustered SR2122 to a SAN
Configuring the SR2122 iSCSI Storage Router in a SAN 15 iSCSI SR2122 Storage Router: Getting Started Guide Figure 4: Standalone SR2122; Dual SANs Adding a Clustered SR2122 to a SAN The two SR2122 FC ports on all the clustered SR2122’s are recognized as F-Ports by the FC switch and as FC HBAs by the ...
Page 16 - Serving Fibre Channel Storage to the SR2122
Serving Fibre Channel Storage to the SR2122 16 iSCSI SR2122 Storage Router: Getting Started Guide Serving Fibre Channel Storage to the SR2122 Once the SR2122 is properly configured, connected and zoned within the SAN, the next step is to present storage to the router. Where normally the storage is p...
Page 17 - To present Unit 1 to the SR2122, the command would be:; must be added to the MSA1000 Unit.; HSG80> Show Connections
Serving Fibre Channel Storage to the SR2122 17 iSCSI SR2122 Storage Router: Getting Started Guide Box 1, Bay 6, (SCSI bus 0, SCSI id 5) Box 1, Bay 7, (SCSI bus 0, SCSI id 8) Box 1, Bay 8, (SCSI bus 1, SCSI id 0) Box 1, Bay 9, (SCSI bus 1, SCSI id 1) Box 1, Bay 11, (SCSI bus 1, SCSI id 3) Logical Vol...
Page 18 - The Show Connections command will now display:
Serving Fibre Channel Storage to the SR2122 18 iSCSI SR2122 Storage Router: Getting Started Guide The Show Connections command will now display: HSG80> show connections ISRFC1-P1 WINNT OTHER 1 0D0F00 OL other 80 HOST_ID=1000-0002-3D07-1E60 ADAPTER_ID=2800-0002-3D07-1E60 ISRFC1-P2 WINNT THIS 2 0D0...
Page 19 - must be added to the HSG80 Unit.; Presenting Enterprise Storage Array (EVA) LUNs to the SR2122; Caution; Open the Storage Array icon and click on hosts. Click the
Serving Fibre Channel Storage to the SR2122 19 iSCSI SR2122 Storage Router: Getting Started Guide Note: If using SR2122 Cluster mode the WWPN for a FC port on each SR2122 cluster member must be added to the HSG80 Unit. The SR2122 should now be able to present D81 as storage to iSCSI Initiators. Pres...
Page 20 - Figure 6: Host Properties; Click
Serving Fibre Channel Storage to the SR2122 20 iSCSI SR2122 Storage Router: Getting Started Guide Click button to save host information. Your host entry should now look like this: Figure 6: Host Properties After the Host entry is created it must be assigned to a LUN. To assign the Host entry to a LU...
Page 21 - Figure 7: Virtual Disk Properties Entry; Presenting VA LUNs to the SR2122; this port dedicated to the SR2122 fabric zone.; Additional required configurations are:
Serving Fibre Channel Storage to the SR2122 21 iSCSI SR2122 Storage Router: Getting Started Guide Figure 7: Virtual Disk Properties Entry Note: If using SR2122 Cluster mode the WWPN for a FC port on each SR2122 cluster member must be added to the HSV110 Unit. The SR2122 should now be able to present...
Page 22 - Presenting XP LUNs to the SR2122; Updated SAN support is available via HP's internal web at
Serving Fibre Channel Storage to the SR2122 22 iSCSI SR2122 Storage Router: Getting Started Guide Presenting XP LUNs to the SR2122 XP storage volume must be pre-configured before the LUN(s) can be detected and recognized by the SR2122. The XP can be configured either through the XP console (SVP) or ...
Page 23 - Serving Storage to the iSCSI Initiators from the SR2122 over IP; SR2122> Show Devices Rediscover
Serving Storage to the iSCSI Initiators from the SR2122 over IP 23 iSCSI SR2122 Storage Router: Getting Started Guide Serving Storage to the iSCSI Initiators from the SR2122 over IP Up to this point, this chapter has described the SR2122 and its impact on the fibre channel SAN. It’s now time to turn...
Page 24 - To add an IP address to this entry:
Serving Storage to the iSCSI Initiators from the SR2122 over IP 24 iSCSI SR2122 Storage Router: Getting Started Guide For example: Each SR2122 router must have an access list entry for each iSCSI initiator Access List entries may be created through the SR2122 GUI or using CLI commands. For example, ...
Page 25 - Figure 8: Access List Entry; Enter the iSCSI Initiator name and click ADD.; Figure 9: iSCSI Initiator Name; Enter the iSCSI Initiator IP address and IP mask and click ADD.
Serving Storage to the iSCSI Initiators from the SR2122 over IP 25 iSCSI SR2122 Storage Router: Getting Started Guide Figure 8: Access List Entry Enter the iSCSI Initiator name and click ADD. Figure 9: iSCSI Initiator Name Enter the iSCSI Initiator IP address and IP mask and click ADD.
Page 26 - Figure 10: iSCSI Initiator IP Address; The Access List entry will now display.; Figure 11: Completed Access List Entry; SR2122 SCSI Router Instances; The basic structure of a SCSI Router Instance is a follows:
Serving Storage to the iSCSI Initiators from the SR2122 over IP 26 iSCSI SR2122 Storage Router: Getting Started Guide Figure 10: iSCSI Initiator IP Address The Access List entry will now display. Figure 11: Completed Access List Entry SR2122 SCSI Router Instances Presenting SAN storage over IP to th...
Page 27 - Figure 12: SCSI Router Instance Structure; SCSI Router Instance; – Contains the IP address used by the iSCSI Initiator, the SR2122; Target; Creating a SCSI Router Instance; Standalone or Cluster Mode.; Using the SR2122 CLI the commands would be:; Table 4: SCSI Router Instance Example
Serving Storage to the iSCSI Initiators from the SR2122 over IP 27 iSCSI SR2122 Storage Router: Getting Started Guide Figure 12: SCSI Router Instance Structure SCSI Router Instance – Contains the IP address used by the iSCSI Initiator, the SR2122 GbE interface port to use, authentication information...
Page 28 - SR2122> scsirouter iSCSI03_Disks reserveproxy disable; To display the SCSI router Instance information:
Serving Storage to the iSCSI Initiators from the SR2122 over IP 28 iSCSI SR2122 Storage Router: Getting Started Guide SR2122> scsirouter iSCSI03_Disks password "none" SR2122> scsirouter iSCSI03_Disks primary "none" SR2122> scsirouter iSCSI03_Disks reserveproxy disable SR2122...
Page 29 - Figure 13: SCSI Router Instance Name and Description; At the Configure LUNs screen click Add LUN.
Serving Storage to the iSCSI Initiators from the SR2122 over IP 29 iSCSI SR2122 Storage Router: Getting Started Guide Figure 13: SCSI Router Instance Name and Description Enter the Target name, Access List entry, click the LUN Mapping radio button and click Add. Figure 14: Add Target Name and Access...
Page 30 - Figure 16: Add New Lun
Serving Storage to the iSCSI Initiators from the SR2122 over IP 30 iSCSI SR2122 Storage Router: Getting Started Guide Figure 15: Configure/Add LUN At the Add New LUN screen enter the SCSI LUN number that will be presented to the iSCSI Initiator, click the WWPN radio button and select the appropriate...
Page 31 - Figure 17: Add Second LUN; Click on SCSI Routers to display all SCSI Router Instances.
Serving Storage to the iSCSI Initiators from the SR2122 over IP 31 iSCSI SR2122 Storage Router: Getting Started Guide Figure 17: Add Second LUN After Clicking Add the browser will return you to the Configure LUNs screen displaying the two newly created LUNs. Figure 18: New LUNs Click on SCSI Routers...
Page 32 - Figure 19: All SCSI Router Instances; Click on the newly created Instance, iSCSI03.; Figure 20: Instance iSCSI03
Serving Storage to the iSCSI Initiators from the SR2122 over IP 32 iSCSI SR2122 Storage Router: Getting Started Guide Figure 19: All SCSI Router Instances Click on the newly created Instance, iSCSI03. Figure 20: Instance iSCSI03 Add ge2 from the Secondary Interface pull down menu, add the SCSI Route...
Page 33 - Figure 21: Secondary Interface; iSCSI Initiator Setup
Serving Storage to the iSCSI Initiators from the SR2122 over IP 33 iSCSI SR2122 Storage Router: Getting Started Guide Figure 21: Secondary Interface The SCSI Router Instance is now available on the IP network for iSCSI Initiator iSCSI03 to connect to once the iSCSI03 has its iSCSI driver loaded and ...
Page 34 - HP iSCSI Initiator Setup for Windows 2000 and Windows 2003; A reboot is necessary to finish the driver installation.; need a host reboot for the changes to take affect.
Serving Storage to the iSCSI Initiators from the SR2122 over IP 34 iSCSI SR2122 Storage Router: Getting Started Guide HP iSCSI Initiator Setup for Windows 2000 and Windows 2003 The iSCSI driver provides a transport for SCSI requests and responses for storage devices; however, instead of providing a ...
Page 35 - Figure 23: iSCSI Configuration Application; The; Status; address and it’s associated Targets.; This screen will not display the LUNs attached to the targets.
Serving Storage to the iSCSI Initiators from the SR2122 over IP 35 iSCSI SR2122 Storage Router: Getting Started Guide After the iSCSI Initiator reboot the iSCSI Configuration application can be found in the Control Panel. Figure 23: iSCSI Configuration Application Click on the ‘hp iSCSI Config’ icon...
Page 36 - Figure 25: iSCSI Connection Status; The other button options:
Serving Storage to the iSCSI Initiators from the SR2122 over IP 36 iSCSI SR2122 Storage Router: Getting Started Guide Figure 25: iSCSI Connection Status The other button options: Add: Used to define the IP addresses of iSCSI target nodes. Enter an IP address for each additional SCSI Router Instance ...
Page 38 - to set up iSCSI targets presented by SR2122.; Figure 26: iSCSI Initiator Properties
Serving Storage to the iSCSI Initiators from the SR2122 over IP 38 iSCSI SR2122 Storage Router: Getting Started Guide Microsoft iSCSI initiator Setup for Windows 2000 and Windows 2003 Server Please download the iSCSI driver from Microsoft's download page, and follow the install instructions to compl...
Page 39 - Figure 27: Add Target Portal
Serving Storage to the iSCSI Initiators from the SR2122 over IP 39 iSCSI SR2122 Storage Router: Getting Started Guide Figure 27: Add Target Portal Next, click on the Available Targets tab to list the targets found through the Available Portals. The Status should be Inactive. Next, log into the targe...
Page 40 - The Target Staus should change to connected.; Figure 29: Verify Connection
Serving Storage to the iSCSI Initiators from the SR2122 over IP 40 iSCSI SR2122 Storage Router: Getting Started Guide The Target Staus should change to connected. To verify that the server is now connected to the SR2122 LUNs click on the Active Sesisons tab, highlight the connected Session and click...
Page 41 - Figure 30: Session Details; only; in lower case letters. If the target; iSCSI Initiator Setup for Red Hat Linux; Loading the iSCSI Driver; Make
Serving Storage to the iSCSI Initiators from the SR2122 over IP 41 iSCSI SR2122 Storage Router: Getting Started Guide Figure 30: Session Details The iSCSI driver should now display all luns that are presented from the SR2122 target. Enter Window's Disk Management application and it should now report...
Page 42 - configuration file might include entries like this:; ANSI SCSI revision: 02; To manually stop the iSCSI driver enter:; Device Names
Serving Storage to the iSCSI Initiators from the SR2122 over IP 42 iSCSI SR2122 Storage Router: Getting Started Guide 4. Update /etc/iscsi.conf to include the IP addresses for your iSCSI targets. A sample configuration file might include entries like this: DiscoveryAddress=33.33.33.101 The iscsi.con...
Page 43 - Target Bindings
Serving Storage to the iSCSI Initiators from the SR2122 over IP 43 iSCSI SR2122 Storage Router: Getting Started Guide Under /dev/iscsi, there will be a directory tree containing subdirectories for each iSCSI bus number, each target id number on the bus, and each logical unit number for each target. ...
Page 44 - Mounting File systems
Serving Storage to the iSCSI Initiators from the SR2122 over IP 44 iSCSI SR2122 Storage Router: Getting Started Guide Mounting File systems Because the Linux boot process normally mounts file systems listed in /etc/fstab before the network is configured, adding mount entries in iSCSI devices to /etc...
Page 45 - Kernel Upgrades; Router; HA environments are not supported.
Serving Storage to the iSCSI Initiators from the SR2122 over IP 45 iSCSI SR2122 Storage Router: Getting Started Guide Each line will show the Linux host number, channel number, target id number, and logical unit number, as well as the IP address, TCP port, and iSCSI TargetName. If an iSCSI session e...
Page 46 - Figure 31: Secure Path configuration example; Secure Path Setup
Serving Storage to the iSCSI Initiators from the SR2122 over IP 46 iSCSI SR2122 Storage Router: Getting Started Guide Figure 31: Secure Path configuration example After configuring the SR2122 in Standalone, the following steps are necessary. ■ SAN/Storage Setup ■ SR2122 Setup ■ Secure Path Setup ■ i...
Page 47 - Setup for EVA; Connection Name
Serving Storage to the iSCSI Initiators from the SR2122 over IP 47 iSCSI SR2122 Storage Router: Getting Started Guide The FC ports emulate a FC HBA on the SAN fabric. Create a zone on each fabric that includes the SR2122 FC port and the storage controllers you want the SR2122 to access. Setup for EM...
Page 48 - Creating the SCSI Router Instance; from each port of the HSV110 to be accessed by iSCSI Initiator; Node A
Serving Storage to the iSCSI Initiators from the SR2122 over IP 48 iSCSI SR2122 Storage Router: Getting Started Guide SR2122 Setup Once storage is presented to Node A and Node B, each SR2122 node should recognize these new devices. If not, the SR2122 can be forced to rescan for devices either throug...
Page 49 - To display Node A router information:
Serving Storage to the iSCSI Initiators from the SR2122 over IP 49 iSCSI SR2122 Storage Router: Getting Started Guide NodeA> scsirouter iSCSI03_Disks primary "none" NodeA> scsirouter iSCSI03_Disks reserveproxy disable NodeA> scsirouter iSCSI03_Disks failover secondary none NodeA>...
Page 50 - another LUN on the storage controller.; Hp Storageworks Secure Path for Windows Setup
Serving Storage to the iSCSI Initiators from the SR2122 over IP 50 iSCSI SR2122 Storage Router: Getting Started Guide Router Target Status Accesslist Targetid Description Profile ---------- ---------------- -------- ---------- ---------- ----------- ------- iSCSI03_Disks HSV23_T1 enabled iSCSI03 non...
Page 51 - iSCSI; Figure 32: Iscsi03 HP Config Screen Example; hp iSCSI Config
Serving Storage to the iSCSI Initiators from the SR2122 over IP 51 iSCSI SR2122 Storage Router: Getting Started Guide Follow the prompts on the screen and accept the license agreement and at the iSCSI Configuration screen, you may enter the SCSI Router Instance IP addresses that the iSCSI Initiator ...
Page 52 - Figure 33: Checking that SR2122 Targets are Active; Windows MSCS Cluster Support
Serving Storage to the iSCSI Initiators from the SR2122 over IP 52 iSCSI SR2122 Storage Router: Getting Started Guide Figure 33: Checking that SR2122 Targets are Active The system may also report a new disk found and ask to write a signature. At this point you would treat this drive as you would any...
Page 53 - Figure 35: MSCS Cluster with SR2122 Routers Example
Serving Storage to the iSCSI Initiators from the SR2122 over IP 53 iSCSI SR2122 Storage Router: Getting Started Guide Figure 35: MSCS Cluster with SR2122 Routers Example As a SR2122 Access List Entry may contain multiple IP addresses, the first step is to create an Access List Entry on the SR2122 th...
Page 54 - Open the
Serving Storage to the iSCSI Initiators from the SR2122 over IP 54 iSCSI SR2122 Storage Router: Getting Started Guide Note: The Access List Name assigned to the IP address does not necessarily have to be the IP address's DNS name. The iSCSI Target(s) on both SR212 routers must contain the same MSCS ...
Page 55 - After the MSCS cluster reboots enter; Figure 36: Secure Path Manager Example
Serving Storage to the iSCSI Initiators from the SR2122 over IP 55 iSCSI SR2122 Storage Router: Getting Started Guide After the MSCS cluster reboots enter hp iSCSI Config again on each cluster member and check the Status of the driver to verify both the SR2122 targets are active. Verify the correct ...
Page 56 - SR2122 / Insight Manager 7 Service Pack 2 Integration; Integration Components; Insight Manager 7 SP 2; Management Server Feature
SR2122 / Insight Manager 7 Service Pack 2 Integration 56 iSCSI SR2122 Storage Router: Getting Started Guide SR2122 / Insight Manager 7 Service Pack 2 Integration The purpose of this section is to describe the integration of the HP SR2122 Storage Router and Insight Manager 7 (IM 7). To IM 7, it is si...
Page 57 - Help
SR2122 / Insight Manager 7 Service Pack 2 Integration 57 iSCSI SR2122 Storage Router: Getting Started Guide Management Server Operating System Microsoft Windows NT Server 4.0 Retail with Service Pack 6a or later Microsoft Windows NT Server 4.0 Enterprise with Service Pack 6a or later Microsoft Windo...
Page 58 - SR2122 SNMP V1 MIBs which effect IM 7 are:; Configuring the SR2122 to integrate with IM 7 SP2; Database Software for Server
SR2122 / Insight Manager 7 Service Pack 2 Integration 58 iSCSI SR2122 Storage Router: Getting Started Guide MSDE 2000 can be found on the Management CD and can be automatically installed for you if you do not already have a database available and running. You must have a database engine installed in...
Page 59 - Figure 37: Valid SR2122 Management Port TCP/IP Configuration; Next, Network Management information must be configured:; Figure 38: Network Management Configuration
SR2122 / Insight Manager 7 Service Pack 2 Integration 59 iSCSI SR2122 Storage Router: Getting Started Guide Figure 37: Valid SR2122 Management Port TCP/IP Configuration Next, Network Management information must be configured: Figure 38: Network Management Configuration Of particular note is the READ...
Page 60 - Configuring IM 7 SP2 to integrate with the SR2122; There are a number of ways that IM 7 can discover the SR2122:; Automatic Discovery
SR2122 / Insight Manager 7 Service Pack 2 Integration 60 iSCSI SR2122 Storage Router: Getting Started Guide If the user would like to see authentication traps (if users are speaking SNMP at the HP SR2122, with an incorrect community string) then they configure it to be enabled. Likewise, if you wish...
Page 61 - Figure 40: Discovery Filters
SR2122 / Insight Manager 7 Service Pack 2 Integration 61 iSCSI SR2122 Storage Router: Getting Started Guide Figure 40: Discovery Filters Manual Discovery You can also just add the device one at a time. But be aware that Device filters should be set properly to allow for network devices to be discove...
Page 62 - SNMP Customizations; SNMP Community Strings
SR2122 / Insight Manager 7 Service Pack 2 Integration 62 iSCSI SR2122 Storage Router: Getting Started Guide SNMP Customizations SNMP Community Strings The SNMP community strings for “Monitor” and “Control” of the devices must correspond to the HP SR2122’s Read and Write Community settings. SNMP Auth...
Page 63 - Figure 43: SNMP Trap Edit; Click on Enable Trap Handling then click Apply.; Figure 44: SNMP Network Query
SR2122 / Insight Manager 7 Service Pack 2 Integration 63 iSCSI SR2122 Storage Router: Getting Started Guide Figure 43: SNMP Trap Edit Click on Enable Trap Handling then click Apply. Figure 44: SNMP Network Query You will find that the HP SR2122 is a network device and will be found via the network d...
Page 64 - Sample Configurations; HP StorageWorks SAN Design Reference Guide
Sample Configurations 64 iSCSI SR2122 Storage Router: Getting Started Guide Sample Configurations For maximum supported SAN and Storage configurations, please refer to Chapters 3 and 4 of the " HP StorageWorks SAN Design Reference Guide ." For maximum supported IP configurations please consu...
Page 66 - Figure 47: Maximum SR2122 Cluster Configuration Using HA Ports
Sample Configurations 66 iSCSI SR2122 Storage Router: Getting Started Guide Figure 47: Maximum SR2122 Cluster Configuration Using HA Ports
