Page 3 - Safety warning notice
Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining ...
Page 5 - Table of contents
Table of contents 1 Product description 2 External component identification Top components ...................................................................................................................... 4 Pointing devices ..........................................................................
Page 12 - External component identification; Top components; Pointing devices
2 External component identification Top components Pointing devices Item Component Function (1) TouchPad light ● Blue: TouchPad is enabled. ● Amber: TouchPad is disabled. (2) TouchPad Moves the pointer and selects or activates items on the screen. (3) TouchPad horizontal scroll zone Allows you to sc...
Page 13 - Keys
Keys Item Component Function (1) Speakers Produce sound. (2) num lock key Enables numeric lock, turns on the embedded numeric keypad, and turns on the num lock light. (3) Embedded numeric keypad keys Can be used like the keys on an external numeric keypad. (4) Arrow keys Move the cursor around the s...
Page 14 - Front components
Front components Item Component Function (1) Power light ● On: The computer is on. ● Blinking: The computer is in the Sleep state. ● Off: The computer is off or in Hibernation. (2) Battery light ● On: A battery is charging. ● Blinking: A battery that is the only available power source has reached a ...
Page 18 - Illustrated parts catalog; Serial number location
3 Illustrated parts catalog Serial number location When ordering parts or requesting information, provide the computer serial number and model number located on the bottom of the computer. 10 Chapter 3 Illustrated parts catalog
Page 19 - Computer major components
Computer major components Computer major components 11
Page 23 - Display assembly components
Display assembly components Item Description Spare part number (1) Display bezel (for Compaq models only) 453525-001 (2) Display inverter (includes Mylar shield) 431391-001 (3) Display Hinge Kit 433288-001 (4) 15.4-inch, WXGA raw panel 442877-001 (5) Wireless Antenna Kit (includes wireless antenna t...
Page 24 - Plastics Kit
Plastics Kit Item Description Spare part number Plastics Kit 442891-001 (1) Hard drive cover (includes 2 captive screws, secured by C-clips) (2) Memory module compartment cover (includes 2 captive screws, secured by C-clips) 16 Chapter 3 Illustrated parts catalog
Page 25 - Mass storage devices; Miscellaneous parts
Mass storage devices Item Description Spare part number (1) Hard drives (all 5400-rpm, include frame and hard drive connector) 120-GB 442882-001 100-GB 444003-001 80-GB 442881-001 (2) Optical drives (include bezel and bracket) DVD±RW and CD-RW Super Multi Double-Layer Combo Drive 442884-001 DVD-RW a...
Page 27 - Sequential part number listing
Sequential part number listing Spare part number Description 309674-001 USB travel mouse 364727-001 USB digital drive 371693-001 Wired headset with volume control 394279-001 Power cord for use in Canada, French Canada, Latin America, Thailand, and the United States 394279-011 Power cord for use in A...
Page 30 - Preliminary replacement requirements; Tools required; Plastic parts
4 Removal and replacement procedures Preliminary replacement requirements Tools required You will need the following tools to complete the removal and replacement procedures: ● Flat-bladed screwdriver ● Hex 5.0-mm nutdriver ● Magnetic screwdriver ● Phillips P0 and P1 screwdrivers Service considerati...
Page 32 - Grounding guidelines; Electrostatic discharge damage
Grounding guidelines Electrostatic discharge damage Electronic components are sensitive to electrostatic discharge (ESD). Circuitry design and structure determine the degree of sensitivity. Networks built into many integrated circuits provide some protection, but in many cases, ESD contains enough p...
Page 34 - Unknown user password
Equipment guidelines Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation. ● When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexible straps with a minimum of one megohm ±10% resistance in the ground cords. To provide proper...
Page 36 - Component replacement procedures; Serial number
Component replacement procedures This chapter provides removal and replacement procedures. There are as many as 82 screws and standoffs, in 11 different sizes, that must be removed, replaced, or loosened when servicing the computer. Make special note of each screw and standoff size and location duri...
Page 37 - Battery
Battery Description Spare part number 6-cell, 2.20-Ah battery 441425-001 Before disassembling the computer, follow these steps: 1 . Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2 . D...
Page 38 - Hard drive
Hard drive Description Spare part number 5400-rpm, 120-GB 442882-001 5400-rpm, 100-GB 444003-001 5400-rpm, 80-GB 442881-001 Before removing the hard drive, follow these steps: 1 . Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then ...
Page 40 - Computer feet; Memory module
Computer feet Description Spare part number Rubber Feet Kit (includes 4 base enclosure rubber feet) 431431-001 The computer feet are adhesive-backed rubber pads. The feet attach to the base enclosure in the locations shown below. Memory module Description Spare part number 1024-MB (PC2-4200, 533-MHz...
Page 43 - WLAN module
WLAN module Description Spare part number 802.11a/b/g WLAN module for use in Canada and the United States 407160-001* 802.11a/b/g WLAN module for use in the People's Republic of China, Ecuador, Haiti, Honduras, Pakistan, Peru, Qatar, South Korea, Uruguay, and Venezuela 407160-002* 802.11b/g WLAN mod...
Page 44 - Optical drive
4 . Remove the WLAN module (3) by pulling it away from the socket at an angle . NOTE: WLAN modules are designed with a notch (4) to prevent incorrect installation into the WLAN module socket. Reverse this procedure to install a WLAN module. Optical drive NOTE: All optical drive spare part kits inclu...
Page 46 - Switch cover
Switch cover Description Spare part number Switch cover (includes display convertible hinge base cover) 442889-001 Before removing the switch cover, follow these steps: 1 . Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it...
Page 48 - Keyboard
Keyboard Country or region Spare part number Country or region Spare part number Denmark, Norway, Sweden France French Canada International Italy Latin America Korea 442887-DH1 442887-051 442887-121 442887-B31 442887-061 442887-161 442887-AD1 Saudi Arabia Spain Taiwan Thailand Turkey The United King...
Page 50 - Power button board
Power button board Description Spare part number Power button board (includes power button board cable) 443153-001 Before removing the power button board, follow these steps: 1 . Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then s...
Page 52 - Display assembly
Display assembly Description Spare part number 15.4-inch, WXGA, BrightView display assembly (includes wireless antenna transceivers and cables) 444896–002 Before removing the display assembly, follow these steps: 1 . Shut down the computer. If you are unsure whether the computer is off or in Hiberna...
Page 57 - Top cover
Top cover Description Spare part number Top cover (includes speakers, TouchPad, and TouchPad cable) 442888-001 Before removing the top cover, follow these steps: 1 . Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down t...
Page 59 - Audio board
6 . Remove the two Phillips PM2.0×6.0 screws (1) and the two Phillips PM2.5×5.0 screws (2) that secure the top cover to the computer. 7 . Lift the front edge of the top cover (1) until it disengages from the computer. 8 . Remove the top cover (2) . Reverse this procedure to install the top cover. Au...
Page 61 - USB/power connector board
USB/power connector board Description Spare part number USB/power connector board (includes USB/power connector board) 431445-001 Before removing the USB/power connector board, follow these steps: 1 . Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the c...
Page 66 - Fan/heat sink assembly
Fan/heat sink assembly Description Spare part number Fan/heat sink assembly (includes thermal paste and thermal pads) 431450-001 NOTE: To properly ventilate the computer, allow at least a 7.6-cm (3-inch) clearance on the right side and rear panel of the computer. The computer uses an electric fan fo...
Page 68 - Processor
Processor NOTE: All processor spare part kits include thermal paste. Description Spare part number AMD Turion TL-58 (1.9-GHz, 1-MB L2 cache) 448525-001 AMD Turion TL-56 (1.8-GHz, 1-MB L2 cache) 431373-001** AMD Turion 64 Mobile Technology TL-52 1.6-GHz processor (1-MB L2 cache) 431372-001 AMD Turion...
Page 70 - Setup Utility; Starting the Setup Utility
5 Setup Utility WARNING! Only authorized technicians trained by HP should repair this equipment. All troubleshooting and repair procedures are detailed to allow repair at only the subassembly or module level. Because of the complexity of the individual boards and subassemblies, do not attempt to mak...
Page 71 - Changing the language of the Setup Utility; Navigating and selecting in the Setup Utility
Changing the language of the Setup Utility The following procedure explains how to change the language of the Setup Utility. If the Setup Utility is not already running, begin at step 1. If the Setup Utility is already running, begin at step 2. 1 . To start the Setup Utility, turn on or restart the ...
Page 72 - Restoring default settings in the Setup Utility; Using advanced Setup Utility features
Restoring default settings in the Setup Utility The following procedure explains how to restore the Setup Utility default settings. If the Setup Utility is not already running, begin at step 1. If the Setup Utility is already running, begin at step 2. 1 . To start the Setup Utility, turn on or resta...
Page 73 - Closing the Setup Utility; Setup Utility menus; Main menu; Security menu
Closing the Setup Utility You can close the Setup Utility with or without saving changes. ● To close the Setup Utility and save your changes from the current session, use either of the following procedures: ◦ Press f10 , and then follow the instructions on the screen. — or — ◦ If the Setup Utility m...
Page 74 - System Configuration menu; Diagnostics menu
System Configuration menu Select To do this Language Support Change the Setup Utility language. Enhanced SATA support (select models only) Enable/disable enhanced SATA mode. Boot Options Set the following boot options: ● f10 and f12 Delay (sec.) ― Set the delay for the f10 and f12 functions of the S...
Page 75 - Specifications; Computer specifications
6 Specifications Computer specifications Metric U.S. Dimensions Length 35.7 cm 14.05 in Width 25.7 cm 10.12 in Height (varies front to rear) 4.1 cm 1.57 in Weight (with optical drive, hard drive, and battery) 2.7 kg 5.47 lbs Input power Operating voltage 18.5 V dc @ 3.5 A - 65 W Operating current 3....
Page 77 - Hard drive specifications
Hard drive specifications 120-GB* 100-GB* 80-GB* Dimensions Height 9.5 mm 9.5 mm 9.5 mm Width 70 mm 70 mm 70 mm Weight 101 g 101 g 101 g Interface type ATA-7 ATA-7 ATA-7 Transfer rate Synchronous (maximum) 100 MB/sec 100 MB/sec 100 MB/sec Security ATA security ATA security ATA security Seek times (t...
Page 79 - System DMA specifications
System DMA specifications Hardware DMA System function DMA0 Not applicable DMA1* Not applicable DMA2* Not applicable DMA3 Not applicable DMA4 Direct memory access controller DMA5* Available for PC Card DMA6 Not assigned DMA7 Not assigned *PC Card controller can use DMA 1, 2, or 5. System DMA specifi...
Page 80 - System interrupt specifications
System interrupt specifications Hardware IRQ System function IRQ0 System timer IRQ1 Standard 101-/102-Key or Microsoft® Natural Keyboard IRQ2 Cascaded IRQ4 COM1 IRQ6 Diskette drive IRQ7* Parallel port IRQ8 System CMOS/real-time clock IRQ9* Microsoft ACPI-compliant system IRQ12 Synaptics PS/2 TouchPa...
Page 81 - System I/O address specifications
System I/O address specifications I/O address (hex) System function (shipping configuration) 000 - 00F DMA controller no. 1 010 - 01F Unused 020 - 021 Interrupt controller no. 1 022 - 024 Opti chipset configuration registers 025 - 03F Unused 02E - 02F 87334 “Super I/O” configuration for CPU 040 - 05...
Page 83 - System memory map specifications
System memory map specifications Size Memory address System function 640 KB 00000000-0009FFFF Base memory 128 KB 000A0000-000BFFFF Video memory 48 KB 000C0000-000CBFFF Video BIOS 160 KB 000C8000-000E7FFF Unused 64 KB 000E8000-000FFFFF System BIOS 15 MB 00100000-00FFFFFF Extended memory 58 MB 0480000...
Page 99 - Backup and Recovery; Recovering system information; Backing up your information; When to back up
8 Backup and Recovery Recovering system information Tools provided by the operating system and Recovery Manager software are designed to help you with the following tasks for safeguarding your information and restoring it in case of a system failure: ● Back up your information regularly to protect y...
Page 100 - Using system restore points; When to create restore points
To copy the screen and paste it into a word-processing document: a . Display the screen. b . Copy the screen: To copy only the active window, press alt+fn+prt sc . To copy the entire screen, press fn+prt sc . c . Open a word-processing document, and then select Edit> Paste . Using system restore ...
Page 101 - Creating recovery discs; Reinstalling software programs and drivers
The System Restore window opens. 5 . Follow the on-screen instructions. Creating recovery discs Recovery Manager creates a set of recovery CDs or DVDs for the computer. Use recovery discs to restore the operating system and software programs to factory settings, in case of system failure or instabil...
Page 102 - Reinstalling preinstalled programs and drivers; Reinstalling programs from discs; Performing a recovery
Recovery Manager replaces corrupted system files and reinstalls deleted system files within the program. ● In most cases, if the program you are reinstalling is still on your computer, the reinstallation process does not affect your personal settings. ● In all cases, if a program has been deleted fr...
Page 103 - Deleting the recovery partition on the hard drive
Recovering from the recovery discs To restore the system from the recovery discs: 1 . Back up all personal files. 2 . Insert the first recovery disc into the optical drive and restart the computer. 3 . Follow the on-screen instructions. Recovering from the partition on the hard drive You can perform...
Page 104 - Updating reinstalled software
Updating reinstalled software After you perform a system recovery, connect to the Internet to update all reinstalled software. To access update links for the operating system and other software provided on your computer: ▲ Select Start > Help and Support . To update optional software, follow the ...
Page 105 - Connector pin assignments
9 Connector pin assignments Audio-out (headphone) Pin Signal 1 Audio out, left channel 2 Audio out, right channel 3 Ground Audio-in (microphone) Pin Signal 1 Audio signal in 2 Audio signal in 3 Ground Audio-out (headphone) 97
Page 106 - External monitor
External monitor Pin Signal 1 Red analog 2 Green analog 3 Blue analog 4 Not connected 5 Ground 6 Ground analog 7 Ground analog 8 Ground analog 9 +5 VDC 10 Ground 11 Monitor detect 12 DDC 2B data 13 Horizontal sync 14 Vertical sync 15 DDC 2B clock 98 Chapter 9 Connector pin assignments
Page 108 - Universal Serial Bus
S-Video-out Pin Signal 1 S-VHS color (C) signal 2 Composite video signal 3 S-VHS intensity (Y) signal 4 S-VHS color ground 5 TV-CD 6 S-VHS intensity ground 7 Composite video ground Universal Serial Bus Pin Signal 1 +5 VDC 2 Data - 3 Data + 4 Ground 100 Chapter 9 Connector pin assignments
Page 109 - Power cord set requirements; Requirements for all countries or regions
10 Power cord set requirements The wide range input feature of the computer permits it to operate from any line voltage from 100 to 120 or 220 to 240 volts AC. The 3-conductor power cord set included with the computer meets the requirements for use in the country or region where the equipment is pur...
Page 110 - Requirements for specific countries or regions
Requirements for specific countries or regions Country/region Accredited agency Applicable note number Australia EANSW 1 Austria OVE 1 Belgium CEBC 1 Canada CSA 2 Denmark DEMKO 1 Finland FIMKO 1 France UTE 1 Germany VDE 1 Italy IMQ 1 Japan METI 3 Korea EK 4 The Netherlands KEMA 1 Norway NEMKO 1 The ...
Page 111 - Recycling
11 Recycling Battery When a battery has reached the end of its useful life, do not dispose of the battery in general household waste. Follow the local laws and regulations in your area for computer battery disposal. Battery 103
Page 112 - Display
Display WARNING! The backlight contains mercury. Caution should be exercised when removing and handling the backlight to avoid damaging this component and causing exposure to the mercury. CAUTION: The procedures in this appendix can result in damage to display components. The only components intende...
Page 118 - Index
Index A AC adapter, spare part number 17, 19 administrator password 65 advanced Setup Utility features 64 arrow keys 5 audio board removal 51 spare part number 13, 20, 51 audio, product description 2 audio-in jack location 6 pin assignments 97 audio-out jack location 6 pin assignments 97 B back up 9...
