HP f1904 - Manuals

User’s Guide 2–1 2 Safety and Maintenance Guidelines Important Safety Information A power cord is included with your monitor. If another cord is used, use only a power source and connection appropriate for this monitor. For information on the correct power cord set to use with your monitor, refer to...

Safety and Maintenance Guidelines 2–2 User’s Guide Maintenance Guidelines To enhance the performance and extend the life of your monitor: ■ Do not open your monitor cabinet or attempt to service this product yourself. Adjust only those controls that are covered in the operating instructions. If your...

Safety and Maintenance Guidelines User’s Guide 2–3 ■ Slots and openings in the cabinet are provided for ventilation. These openings must not be blocked or covered. Never push objects of any kind into cabinet slots or other openings. ■ Do not drop your monitor or place it on an unstable surface. ■ Do...

User’s Guide 3–1 3 Setting Up the Monitor To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow these steps: 1. Place the monitor in a convenient, well-ventilated location near your computer. 2. Connect one end of the moni...

Setting Up the Monitor 3–6 User’s Guide Selecting the Signal Connectors and Cables There are two signal input connectors: One VGA connector and one DVI-I connector. The monitor will automatically determine which inputs have valid video signals. The inputs can be selected through the On-Screen Displa...

Setting Up the Monitor User’s Guide 3–7 Removing the Monitor Base You can remove the monitor base to mount the monitor on a wall, a swing arm or other mounting fixture. Read the caution and warning statements below before beginning the procedure. Ä CAUTION: Before beginning to disassemble the monito...

Setting Up the Monitor 3–8 User’s Guide 1. Disconnect and remove the signal and power cables from the back of the monitor. 2. Remove the four screws as shown in the following illustration. Ä CAUTION: Ensure that the bottom of the monitor base is positioned over a table or desktop before removing the...

User’s Guide 4–1 4 Operating the Monitor Installing the Drivers The monitor comes with driver software allowing you to take advantage of the Plug and Play feature of the Microsoft ® Windows ® Me, Windows 2000, or Windows XP operating system. This software enables the computer to communicate with the...

Operating the Monitor 4–2 User’s Guide 3. Click the Settings tab. 4. Click Advanced Properties or Advanced , and select the Monitor tab. 5. Click Properties . 6. Click the Driver tab. 7. Click Update Driver and click Next . 8. Select the recommended option and then click Next . 9. Select the Specify...

Operating the Monitor User’s Guide 4–3 Windows XP users ✎ The procedure for installing the driver for your operating system may vary. To install the driver for the f1904 monitor: 1. Click Start . 2. Click Control Panel . 3. Click Appearance and Themes . 4. Click Display . 5. Select the Settings tab....

Operating the Monitor 4–4 User’s Guide Front Panel Components ‘ 1 2 3 4 5 No. Control Function 1 On/Off Turns the monitor on and off 2 Menu • When OSD is active, closes setting screens and exits OSD. • When OSD is inactive, opens and closes OSD. 3 Left or Down Browse/ Input 1 • When OSD is active, n...

Operating the Monitor User’s Guide 4–5 Adjusting Monitor Settings Press the menu button on the front panel of your monitor to view the On-Screen Display (OSD) Menu. The Main Controls window pops up and you can make adjustments to your monitor’s various features. Use the left arrow and right arrow ke...

Operating the Monitor 4–6 User’s Guide Using the On-Screen Display The adjustments for screen settings are located in the On-Screen Display (OSD) menus. Two OSD menus are available; one for basic adjustments, and one for advanced adjustments.To access the Basic OSD Menu, press the Menu button on the...

Operating the Monitor 4–8 User’s Guide Using the Auto-Adjustment Function You can easily optimize the screen performance for the VGA interface by using the Auto button and the auto-adjustment pattern software on the CD-ROM disc provided. 1. Insert the provided CD-ROM disc into the computer. 2. Run t...

Operating the Monitor User’s Guide 4–9 Optimizing Analog Video This monitor contains advanced circuitry that allows the flat panel screen to function as a standard monitor. Two controls in the on-screen display can be adjusted to improve image performance: Clock and Clock Phase. Use these controls o...

User’s Guide A–1 A Troubleshooting Solving Common Problems The following table lists possible problems, the possible cause of each problem, and the recommended solutions. Problem Possible Cause Solution Screen is blank. Power cord is disconnected. Connect the power cord. Power switch is turned off. ...

Troubleshooting User’s Guide A–3 Using the World Wide Web Before contacting customer services, refer to the support Web site at: http://www.hp.com Preparing to Call Technical Support If you cannot solve a problem using the troubleshooting tips in this section, you may need to call technical support....

User’s Guide B–1 B Technical Specifications f1904 Flat Panel Monitor DisplayType 19.0 inchesTFT LCD 48.3 cm Viewable Image Size 19.0-inch diagonal 48.3 cm TiltSwivel –5 to 20 o +35 to –35 o Face Treatment Anti-glare polarizer with hard coating Maximum Weight(Unpacked) 17.2 lbs. 7.8 kg (unpacked) Dim...

Technical Specifications User’s Guide B–3 Recognizing Preset Display Resolutions The display resolutions listed below are the most commonly used modes and are set as factory defaults. This monitor automatically recognizes these preset modes and they will appear properly sized and centered on the scr...

Technical Specifications User’s Guide B–5 Entering User Modes The video controller signal may occasionally call for a mode that is not preset if: ■ You are not using a standard graphics adapter. ■ You are not using a preset mode. If this occurs, you may need to readjust the parameters of the monitor...

User’s Guide C–1 C Agency Regulatory Notices Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inte...

Agency Regulatory Notices C–2 User’s Guide Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Hewlett-Packard Company may void the user’s authority to operate the equipment. Cables Connections to this device...

Agency Regulatory Notices User’s Guide C–3 Canadian Notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Avis Canadien Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Ca...

Agency Regulatory Notices C–4 User’s Guide Korean Notice EPA Energy Star Compliance Monitors that are marked with the Energy Star ® Logo meet the requirements of the EPA Energy Star program. As an Energy Star Partner, Hewlett-Packard Company has determined that this product meets the Energy Star gui...

Agency Regulatory Notices User’s Guide C–5 Power Cord Set Requirements The monitor power supply is provided with Automatic Line Switching (ALS). This feature allows the monitor to operate on input voltages between 100–120V or 200–240V .The power cord set (flexible cord or wall plug) received with th...

User’s Guide D–1 D TCO ‘03 Requirements Congratulations! The display you have just purchased carries the TCO’03 Display label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a hi...

TCO ‘03 Requirements D–2 User’s Guide Energy ■ Energy-saving mode after a certain time — beneficial both for the user and the environment. ■ Electrical safety. Emissions ■ Electromagnetic fields. ■ Noise emissions. Ecology ■ The product must be prepared for recycling and the manufacturer must have a...