HP BL30p - Manuals - manualsarea.com

Page 2 - At A Glance; QuickSpecs; HP ProLiant BL30p Server Blade; Overview

At A Glance Maximum density ProLiant BL30p server blade Up to two Intel Xeon 3.2-GHz/533-MHz with 2MB L3 cache processors with Hyper-Threading TechnologyServerWorks GC-LE chipset1024-MB PC2100-MHz Registered ECC DDR memory (1 x 1-GB), expandable to 4-GB, flex memory supports interleaved and non-inte...

Page 4 - OR

BL p-Class Server Blade Enclosure with enhanced backplane components + OR Patch Panel (shown) or Patch Panel 2 GbE Interconnect Switch (shown) or GbE2 Interconnect Switch (fiber- or copper-based) BL p-Class Interconnects + BL p-Class power enclosure(s) and power supplies (three phase recommended) + ...

Page 5 - Configuration Steps

OR OR Mini bus bars Scalable bus bars Bus boxes BL p-Class power distribution Configuration Steps For a complete ProLiant BL30p blade solution, do the following: Select desired model, configuration and quantity of ProLiant BL30p server blades PLUS 1. Determine how many BL30p blade sleeves are requir...

Page 10 - ProLiant BL p-Class Server Blade Enclosure and Interconnects; Standard Features (Server Blade Enclosure and Interconnects)

ProLiant BL p-Class Server Blade Enclosure and Interconnects ProLiant BL p-ClassServer Blade Enclosure 6U (10.5-inch), 19-inch wide Holds up to: Eight (8) ProLiant BL20p series server bladesSixteen (16) ProLiant BL30p series server blades (BL30p blade sleeves required)Two (2) ProLiant BL40p series s...

Page 14 - Standard Features (Power System and Rack Information)

ProLiant BL p-ClassPower System andRack Information NOTE: To determine power configuration, please refer to the ProLiant BL p-Class Overview and Planning Whitepaperand sizing utility at http://www.hp.com/products/servers/proliant-bl/p-class/info/ . ProLiant BL p-ClassPower Enclosure 3U (5.25-inch), ...

Page 19 - Models

ProLiant BL30p X3.2-2MB,1GB (2P)360329-B21 Processor(s) Two (2) Intel Xeon 3.2-GHz standard (up to 2 supported) Cache Memory 2-MB Level 3 writeback per processor Memory 1024-MB (standard) to 4-GB (maximum) of PC2100 DDR SDRAM running at 266-MHz(1 x 1-GB); 2-way interleaved when an identical pair ins...

Page 21 - Step 1: Base Server Blade Configuration; Step 3: Choose Additional Options for Factory Integration; Configuration Information - Factory Integrated Models

NOTE: HP does not allow factory integration of options into standard models listed above.Configure-to-order servers must start with a CTO Chassis. Step 1: Base Server Blade Configuration Model HP ProLiant BL30p Configurable Model 367243-405 Configurable Model ships with:- Two embedded NC7781 PCI-X G...

Page 22 - Options

NOTE: Some options may not be factory integratable. Please contact your local sales representative for additional information. Unique Options ATA Hard Drive Kit for ProLiant BL30p, 2.5" parallel ATA drive, 60GB, 5400 rpm (option) 354052-B21 ProLiant BL30p Blade Sleeve Kit (option) 354101-B21 NOT...

Page 31 - Memory

ProLiant BL30p Server Blade (all models) Standard Memory1024-MB PC2100 MHz Registered DDR SDRAM DIMM installed (1 x 1-GB SDRAM DIMM) Standard Memory Replaced with Optional MemoryUp to 4096-MB of DDR SDRAM DIMM memory is available with the removal of standard memory and the installation of optional S...

Page 32 - Technical Specifications

ProLiant BL p-ClassServer Blade Enclosurewith enhanced backplanecomponents Dimensions Height 10.5 in (26.67 cm) Width 17.60 in (44.70 cm) Depth 28.86 in (73.30 cm) Input Specifications Rated input voltage -43 VDC to -53 VDC Nominal -48 VDC Rated input current 125 A at -48 VDC Rated input Power 6000 ...