HP B2C43UT#ABA - Manuals

2 External component identification 4 Chapter 2 External component identification

Buttons 6 Chapter 2 External component identification

Keys Item Component Description (1) esc key Displays system information when pressed in combinationwith the fn key. (2) fn key Displays system information when pressed in combinationwith the esc key. (3) Windows logo key Displays the Windows Start menu. (4) Windows applications key Displays a shortc...

TouchPad Item Component Description (1) TouchPad light ● On: The TouchPad is off. ● Off: The TouchPad is on. (2) TouchPad on/off button Turns the TouchPad on and off. Quickly double-tap theTouchPad on/off button to turn the TouchPad on and off. (3) TouchPad zone Moves the pointer and selects or acti...

Right side Item Component Description (1) Digital Media Slot Supports the following digital card formats: ● MultiMediaCard ● SD Card ● Secure Digital High-Capacity (SDHC) Card ● Secure Digital Extended Capacity (SDxC) Card (2) Audio-out (headphone) jack Produce sound when connected to optional power...

3 Illustrated parts catalog 14 Chapter 3 Illustrated parts catalog

Computer major components 16 Chapter 3 Illustrated parts catalog

Item Component Spare part number Screws (not illustrated) (4) External optical drive: Blu-ray ROM DVD±R/RW Super Multi Double-Layer Drive 659941-001 DVD±RW and CD-RW Super Multi Double-Layer Combo Drive 659940-001 Miscellaneous parts Component Spare part number 65-W PFC RC V 3-wire HP Smart AC adapt...

4 Removal and replacementprocedures Preliminary replacement requirements Tools required You will need the following tools to complete the removal and replacement procedures: ● Flat-bladed screwdriver ● Magnetic screwdriver ● Phillips P0 and P1 screwdrivers Service considerations The following sectio...

Drive handling CAUTION: Drives are fragile components that must be handled with care. To prevent damage to the computer, damage to a drive, or loss of information, observe these precautions: Before removing or inserting a hard drive, shut down the computer. If you are unsure whetherthe computer is o...

Component replacement procedures This chapter provides removal and replacement procedures. There are as many as 44 screws that must be removed, replaced, or loosened when servicingthe computer. Make special note of each screw size and location during removal and replacement. Service tag When orderin...

Item Component Description (3) Part number/Product number (p/n) This number provides specific information about theproduct’s hardware components. The part number helpsa service technician determine what components andparts are needed. (4) Warranty period This number describes the duration of the war...

SIM NOTE: The SIM is provided by the end-user as a security measure for the WWAN module. The SIM should be removed, placed into a static-dissipative container, and then replaced when the computeris reassembled. Before removing the SIM, follow these steps: 1. Shut down the computer. If you are unsure...

Display panel Description Spare part number 11.6-in, LED, HD, BrightView SVA display panel 668353-001 Before removing the display panel, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turnthe computer on, and then shut it down through ...

WLAN module Description Spare part number Ralink 3592BC8 802.11a/b/g/n 2×2 WiFi and Bluetooth 3.0+HS Combo Adapter 630813-001 CAUTION: To prevent an unresponsive system, replace the wireless module only with a wireless module authorized for use in the computer by the governmental agency that regulat...

WWAN module NOTE: This section applies only to computer models equipped with an Intel processor. Description Spare part number HP hs2340 HSPA+ Mobile Broadband Module 632155-001 CAUTION: To prevent an unresponsive system, replace the wireless module only with a wireless module authorized for use in ...

RTC battery Description Spare part number For use only on computer models with WWAN compatibility 664994-001 For use only on computer models without WWAN compatibility 599516-001 Before removing the RTC battery, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is...

Hard drive NOTE: The hard drive spare part kit does not include the hard drive bracket, connector cable, isolators, or screws. These components are included in the Hard Drive Hardware Kit, spare partnumber 664913-001. Description Spare part number 500-GB, 5400-rpm, SATA, 7.0-mm 669299-001 320-GB, 54...

Memory module Description Spare part number 4-GB memory module (PC3, 10600, 1333-MHz) 621569-001 2-GB memory module (PC3, 10600, 1333-MHz) 621565-001 Before removing a memory module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turnt...

Keyboard NOTE: The keyboard spare part kit includes a keyboard cable. For use in country or region: Spare part number: For use in country or region: Spare part number: Keyboard in charcoal finish: For use in Brazil 659500-201 For use in Latin America 659500-161 For use in Canada 659500-121 For use i...

Display assembly NOTE: The display assembly subcomponents are spared as individual components. Before removing the display assembly subcomponents, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turnthe computer on, and then shut it dow...

i. Remove the wireless antenna cables and transceivers (6) . The WLAN antenna are available in the Wireless Antenna Kit, spare part number 659492-001. Reverse this procedure to reassemble and install the display assembly. Top cover Description Spare part number Top cover in charcoal finish (includes...

7. Remove the four Phillips PM2.5×7.0 screws that secure the top cover to the computer. 8. Lift the rear edge of the top cover (1) until the left and right sides disengage from the base enclosure. 9. Remove the top cover (2) . Reverse this procedure to install the top cover. Speakers Description Spa...

TouchPad button board Description Spare part number TouchPad button board (includes cable) 664993-001 Before removing the TouchPad button board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turnthe computer on, and then shut it down ...

4. Remove the TouchPad button board (3) and cable. Reverse this procedure to install the TouchPad button board and cable. System board NOTE: The system board spare part kit includes replacement thermal material. Description Spare part number For use only with computer models equipped with an AMD E45...

Power connector cable Description Spare part number Power connector cable (includes bracket) 664995-001 Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turnthe computer on, and then shut it dow...

Heat sink Description Spare part number Heat sink (includes replacement thermal material) 664999-001 NOTE: To properly ventilate the computer, allow at least 7.6 cm (3 in) of clearance on the left side of the computer. The computer uses an electric fan for ventilation. The fan is controlled by a tem...

5 Setup Utility (BIOS) and SystemDiagnostics Using Setup Utility Setup Utility, or Basic Input/Output System (BIOS), controls communication between all the input andoutput devices on the system (such as disk drives, display, keyboard, mouse, and printer). Setup Utilityincludes settings for the types...

Navigating and selecting in Setup Utility To navigate and select in Setup Utility, follow these steps: 1. Turn on or restart the computer, and then press esc while the “Press the ESC key for Startup Menu” message is displayed at the bottom of the screen. ● To select a menu or a menu item, use the ta...

Restoring factory settings in Setup Utility NOTE: Restoring defaults will not change the hard drive mode. To return all settings in Setup Utility to the values that were set at the factory, follow these steps: 1. Turn on or restart the computer, and then press esc while the “Press the ESC key for St...

Determining the BIOS version To determine whether available BIOS updates contain later BIOS versions than those currently installedon the computer, you need to know the version of the system BIOS currently installed. BIOS version information (also known as ROM date and System BIOS) can be displayed ...

BIOS installation procedures vary. Follow any instructions that are displayed on the screen after thedownload is complete. If no instructions are displayed, follow these steps: 1. Windows 7 —Open Windows Explorer by selecting Start > Computer . Windows XP —Open Windows Explorer by selecting Start...

6 Specifications Computer specifications Metric U.S. Dimensions Width 29.16 cm 11.48 in Depth 2.15 cm 8.46 in Height (front to back) 2.11 to 3.19 cm 0.83 to 1.26 in Weight With 6-cell battery 1.60 kg 3.53 lb With 3-cell battery 1.46 kg 3.22 lb Input power Operating voltage and current 18.5 V dc @ 3....

Hard drive specifications *640-GB *500-GB *320-GB *250-GB Dimensions Height 9.5 mm 9.5 mm 9.5 and 7.0 mm 9.5 and 7.0 mm Length 100.2 mm 100.4 mm 100.4 mm 100.4 mm Width 69.9 mm 69.9 mm 69.9 mm 69.9 mm Weight 98 g 110 g 110 g 110 g Interface type SATA SATA SATA SATA Transfer rate Synchronous (maximum...

7 Backup and recovery Your computer includes tools provided by the operating system and HP to help you safeguard yourinformation and restore it if ever needed. This chapter provides information on the following topics: ● Creating a set of recovery discs or a recovery flash drive (Recovery Manager so...

Creating restore media HP recommends that you create either a set of recovery discs or a recovery flash drive to be sure thatyou can restore your computer to its original factory state if the hard drive fails, or if for any reason youcannot restore using the recovery partition tools. Create these di...

Performing a system restore Recovery Manager software allows you to repair or restore the computer to its original factory state.Recovery Manager works from recovery discs, a recovery flash drive, or from a dedicated recoverypartition (select models only) on the hard drive. NOTE: A system restore ne...

Backing up and recovering your information It is very important to back up your files and keep any new software in a safe place. As you add newsoftware and data files, continue to create backups on a regular basis. How completely you are able to recover your system depends on how recent your backup ...

Using Windows Backup and Restore Guidelines: ● Be sure that the computer is connected to AC power before you start the backup process. ● Allow enough time to complete the backup process. Depending on file sizes, it may take overan hour. To create a backup: 1. Select Start > Control Panel > Sys...

Create a system restore point 1. Select Start > Control Panel > System and Security > System . 2. In the left pane, click System Protection . 3. Click the System Protection tab. 4. Follow the on-screen instructions. Restore to a previous date and time To revert to a restore point (created a...

8 Power cord set requirements The wide-range input feature of the computer permits it to operate from any line voltage from 100 to120 volts AC, or from 220 to 240 volts AC. The 3-conductor power cord set included with the computer meets the requirements for use in thecountry or region where the equi...

9 Recycling When a non-rechargeable or rechargeable battery has reached the end of its useful life, do not disposeof the battery in general household waste. Follow the local laws and regulations in your area forbattery disposal. HP encourages customers to recycle used electronic hardware, HP origina...

Index A AC adapter, spare part number 22, 23 Action keys 8antenna locations 5removal 52spare part number 20, 23, 53 Antenna Kit, spare part number 20, 53 audio, product description 2audio-in jack 12audio-out jack 12 B base enclosure, spare part number 17, 23 battery removal 32spare part number 18, 2...