HP ALTO-G12 - Manuals

HP ALTO-G12 – Manual in PDF format online.

Manuals:

Manual

Manual HP ALTO-G12

Summary

Page 2 - If you select SPC, you must also define the STATE.

Before you leave 1. Check the status of the Alto batteries: 4 Turn the Alto ON. 4 Press the ON button a second time (may take a moment). 4 The % charge status of the two batteries is displayed on the screen. 4 As long as the two percentages add up to more than 40%, you will be fine. If you are going...

Page 4 - If you wish to add to an existing Job file, use the

To see the coordinates of your current location, without saving them When the unit is ON, press the ON button again to get to the STATUS screen. Your coordinates are displayed. Collecting data and saving to a file Data is collected and organized into “jobs” and “features”. A job file can contain man...

Page 5 - From the Main Menu, highlight Transfer Data and press the Enter key.

Downloading the data to a PC You will need to find a computer with the “PC-GPS 3.7” software on it (which may also be labeled “Alto-G12 GPS” depending on who installed the software). All the lab computers in the ACL and at Treehaven should have it. You will also need a black, coiled cable with a COM...