Page 3 - Contents; About This Guide
edge switch 2/32 installation guide iii Contents About This Guide Intended Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ixRelated Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 5 - Flexport Upgrade Instructions
Contents edge switch 2/32 installation guide v Configure Port Addresses (S/390 Mode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–36Configure SNMP Trap Message Recipients . . . . . . . . . . . . . . . . . . . . . . . . . . 2–39Configure and Enable E-mail Notification . . . . . . . . . ....
Page 6 - B Technical Specifications
vi edge switch 2/32 installation guide Contents Declaration of Conformity for Products Marked with FCC Logo—United States Only A–3Modifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A–3Network and Serial Cables . . . . . . . . . . ....
Page 8 - Tables; B–4 Environmental
viii edge switch 2/32 installation guide Contents 2–40 Switch page—Identification tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–56 2–41 Switch page—Date/Time tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–57 2–42 Switch page—Parameters ...
Page 9 - This installation guide provides information to help you:; Intended Audience; Fibre Channel technology; Related Documentation
About This Guide ix edge switch 2/32 installation guide About This Guide This installation guide provides information to help you: • Set up the Edge Switch 2/32. • Configure the Edge Switch 2/32. • Manage the Edge Switch 2/32. • Contact technical support for additional assistance. Intended Audience ...
Page 10 - Document Conventions; The conventions included in; Table 1: Document Conventions; Bold
About This Guide x edge switch 2/32 installation guide Document Conventions The conventions included in Table 1 apply. Table 1: Document Conventions Element Convention Cross-reference links Blue text: Figure 1 Key names, menu items, buttons, and dialog box titles Bold File names, application names, ...
Page 11 - Symbols in Text
About This Guide xi edge switch 2/32 installation guide Symbols in Text These symbols may be found in the text of this manual. They have the following meanings. WARNING: Text set off in this manner indicates that failure to follow directions in the warning could result in bodily harm or loss of life...
Page 12 - Rack Stability
About This Guide xii edge switch 2/32 installation guide Any surface or area of the equipment marked with these symbols indicates the presence of a hot surface or hot component. Contact with this surface could result in injury. WARNING: To reduce the risk of injury from a hot component, allow the su...
Page 13 - Getting Help; HP Technical Support; HP Authorized Reseller
About This Guide xiii edge switch 2/32 installation guide Getting Help If you still have a question after reading this manual, contact an HP authorized service provider or access our website: http://thenew.hp.com. HP Technical Support In North America, call technical support at 1-800-652-6672, avail...
Page 15 - Introduction; The HAFM server and minimum hardware specifications.
edge switch 2/32 installation guide 1–1 1 Introduction The HP StorageWorks Edge Switch 2/32 provides dynamic switched connections between Fibre Channel servers and devices in a storage area network (SAN) environment. SANs introduce the concept of server-to-device networking and multi-switch fabrics,...
Page 16 - Edge Switch 2/32 Description
1–2 edge switch 2/32 installation guide Introduction Edge Switch 2/32 Description The switch can be installed on a table or desk top, or mounted in an equipment cabinet or in any standard equipment rack. Multiple switches and the HAFM server communicate on a local area network (LAN) through one or m...
Page 17 - Features
edge switch 2/32 installation guide 1–3 Introduction Features The following sections describe the features of the Edge Switch 2/32: Error-Detection, Reporting, and Serviceability The switch provides the following error-detection, reporting, and serviceability features: • Light-emitting diodes (LEDs)...
Page 18 - Zoning
1–4 edge switch 2/32 installation guide Introduction • Data collection through the Product Manager application to help isolate system problems. The data includes a memory dump file and audit, hardware, and engineering logs. • Simple network management protocol (SNMP) management using the Fibre Allia...
Page 19 - Switch Management
edge switch 2/32 installation guide 1–5 Introduction Zones are grouped into zone sets. A zone set is a group of zones that is enabled (activated) or disabled across all switches in a multi-switch fabric. Only one zone set can be enabled at one time. Multi-Switch Fabrics A Fibre Channel topology that...
Page 20 - Field Replaceable Units
1–6 edge switch 2/32 installation guide Introduction checking is done for pre-existing conditions and no prompts display to guide users through tasks. Refer to hp StorageWorks CLI reference guide for edge switches and directors. This manual provides details on the Product Manager application for the...
Page 21 - SFP Transceivers; Each fan FRU can be replaced while the switch is operating.; Power Supplies
edge switch 2/32 installation guide 1–7 Introduction Figure 1–3: Edge Switch 2/32 (Rear View) SFP Transceivers A single-mode or multi-mode fiber-optic cable attaches to a port through a pluggable small form factor (SFP) transceiver. The SFP provides a duplex LC interface, and can be detached from th...
Page 22 - Appendix B; Connectors and Indicators
1–8 edge switch 2/32 installation guide Introduction Each power supply has a separate CTP connection to allow for independent AC power sources. The power supplies are input-rated at 100 to 230 volts alternating current (VAC). Power supply requirements are listed in Appendix B . Connectors and Indica...
Page 23 - Power and System Error LEDs; Port SFP — Amber and green LEDs to the left of the port, as shown in; Maintenance Port; Software Diagnostic Features
edge switch 2/32 installation guide 1–9 Introduction Power and System Error LEDs The PWR LED, as shown in Figure 1–2 illuminates when the switch is connected to facility AC power and powered on. If the LED extinguishes, a facility power source, power cord, or power distribution failure is indicated....
Page 24 - HAFM Server Description; The HAFM server, as shown in; Figure 1–4: HAFM server
1–10 edge switch 2/32 installation guide Introduction • FRUs provide on-board diagnostic and monitoring circuits that continuously report FRU status to the HAFM and Product Manager applications. These applications provide system alerts and logs that display failure and diagnostic information at the ...
Page 25 - Ethernet Hub; Optional Kits; Table 1–1: Edge switch 2/32 Optional Kits
edge switch 2/32 installation guide 1–11 Introduction Although a configured switch operates normally without HAFM server intervention, an attached server should operate at all times to monitor switch operation, log events and configuration changes, and report failures. The HAFM server provides an au...
Page 27 - Installing and Configuring; Summary of Installation Tasks; Table 2–1: Installation Task Summary; HAFM
edge switch 2/32 installation guide 2-1 2 Installing and Configuring the Edge Switch 2/32 This chapter describes tasks to install, configure, and verify operation of the edge switch 2/32. The switch can be installed on a table or desk top, or mounted in any standard equipment rack. For a list of the...
Page 28 - Task Number and Description
2-2 edge switch 2/32 installation guide Installing and Configuring the Edge Switch 2/32 Task 6: Configure the Switch to the HAFM Application Required if Task 5: HAFM Server (Optional) task was done. 2–13 Task 7: Record or Verify HAFM Server Restore Information Required if Task 5: HAFM Server (Option...
Page 29 - Installation Options
edge switch 2/32 installation guide 2-3 Installing and Configuring the Edge Switch 2/32 Installation Options The switch is installed in one of two configurations. The options are: • Table or desk top—one or more switches, an optional HAFM server, and an optional Ethernet hub are delivered and instal...
Page 30 - Unpack and Inspect the Switch
2-4 edge switch 2/32 installation guide Installing and Configuring the Edge Switch 2/32 Task 2: Unpack, Inspect, and Install the Switch The following paragraphs provide instructions to unpack and inspect the edge switch 2/32, and install it in a desktop or rack-mount configuration. Unpack and Inspec...
Page 31 - the ports are tested.; switch 2/32 service manual to isolate the problem.; Rack-Mount Installation
edge switch 2/32 installation guide 2-5 Installing and Configuring the Edge Switch 2/32 4. Verify that the SFP optical transceivers are installed as required for your installation. 5. Connect the U.S. or country-specific (optional) AC power cords to the right (PS0) and left (PS1) receptacles at the ...
Page 32 - Task 3: Configure Network Information
2-6 edge switch 2/32 installation guide Installing and Configuring the Edge Switch 2/32 Task 3: Configure Network Information The edge switch 2/32 is delivered with the following default network addresses: • MAC address—the media access control (MAC) address is programmed into FLASH memory on the CT...
Page 33 - — The Microsoft Windows 98, Windows; The Connection Description dialog box displays, as shown in
edge switch 2/32 installation guide 2-7 Installing and Configuring the Edge Switch 2/32 Verify the type of LAN installation with the customer’s network administrator. If one switch is installed on a dedicated LAN, network addresses do not require change. If multiple switches are installed or a publi...
Page 34 - Figure 2–1: Connection Description dialog box; in the Name field and click OK. The Connect To; Figure 2–2: Connect To dialog box
2-8 edge switch 2/32 installation guide Installing and Configuring the Edge Switch 2/32 Figure 2–1: Connection Description dialog box 5. Type edge switch 2-32 in the Name field and click OK. The Connect To dialog box displays, as shown in Figure 2–2 . Figure 2–2: Connect To dialog box
Page 35 - Figure 2–3: Port Settings dialog box; None
edge switch 2/32 installation guide 2-9 Installing and Configuring the Edge Switch 2/32 6. Ensure the Connect using field displays COM1 or COM2 (depending on the serial communication port connection to the switch), and click OK. The Port Settings dialog box displays, as shown in Figure 2–3 . Figure ...
Page 36 - Figure 2–4: HyperTerminal window; ipconfig; — MAC Address; Request completed OK; HyperTerminal window.
2-10 edge switch 2/32 installation guide Installing and Configuring the Edge Switch 2/32 Figure 2–4: HyperTerminal window 9. At the C> prompt, type ipconfig and press Enter. The HyperTerminal window displays with configuration information listed as follows: — MAC Address — IP Address (default is ...
Page 37 - message box displays, as shown in; Figure 2–5: Disconnect Now dialog box; Click No to exit and close the HyperTerminal application.; Choose Start > Shut Down. The Shut Down Windows dialog box displays.; terminal. Replace the protective plate over the maintenance port.
edge switch 2/32 installation guide 2-11 Installing and Configuring the Edge Switch 2/32 11. Choose Exit from the File menu to close the HyperTerminal application. A message box displays, as shown in Figure 2–5 . Figure 2–5: Disconnect Now dialog box 12. Click Yes. A message box displays, as shown i...
Page 38 - Task 15: Configure the Switch from the Embedded Web Server
2-12 edge switch 2/32 installation guide Installing and Configuring the Edge Switch 2/32 2. Connect the remaining end of the Ethernet cable to the LAN as follows: a. If the switch is installed on a customer-supplied LAN segment, connect the cable to the LAN as directed by the customer’s network admi...
Page 39 - Task 6: Configure the Switch to the HAFM Application; Figure 2–7: New Product dialog box; from the Product Type field and click OK. A new switch icon; through; Task 7: Record or Verify HAFM Server Restore Information
edge switch 2/32 installation guide 2-13 Installing and Configuring the Edge Switch 2/32 Task 6: Configure the Switch to the HAFM Application To manage a new switch, it must be identified to the HAFM application. To identify the new switch: 1. Right-click in a blank area of the Product View page and...
Page 40 - desktop) to maximize the Product View page.; explains operational states and associated; Table 2–2: Switch Operational States and Symbols
2-14 edge switch 2/32 installation guide Installing and Configuring the Edge Switch 2/32 Task 8: Verify Switch-to-HAFM Server Communication Communication must be verified between the switch and the HAFM server (High Availability Fabric Manager and Product Manager applications). To verify switch-to-s...
Page 41 - Figure 2–8: Switch Hardware View page
edge switch 2/32 installation guide 2-15 Installing and Configuring the Edge Switch 2/32 Figure 2–8: Switch Hardware View page 4. Inspect switch status at the Hardware View page and perform one of the following steps: a. If the switch displays operational (no FRU alert symbols and a green circle at ...
Page 42 - Configure HP Flexport Technology Feature Key; Chapter 3; Configure OSMS Feature Key; To configure the OSMS feature key:
2-16 edge switch 2/32 installation guide Installing and Configuring the Edge Switch 2/32 • Fiber connection (FICON) management server (FMS) These features allow open systems or FICON host control of the switch and are mutually exclusive. Only one of these features can be installed at a time. Feature...
Page 43 - Figure 2–9: Configure Feature Key dialog box; Click New. The New Feature Key dialog box displays, as shown in; Figure 2–10: New Feature Key dialog box; OK. The Enable Feature Key dialog box displays, as shown in; Figure 2–11: Enable Feature Key dialog box
edge switch 2/32 installation guide 2-17 Installing and Configuring the Edge Switch 2/32 Figure 2–9: Configure Feature Key dialog box 3. Click New. The New Feature Key dialog box displays, as shown in Figure 2–10 . Figure 2–10: New Feature Key dialog box 4. Type the OSMS feature key (case-sensitive ...
Page 44 - Configure FMS Feature Key; or zSeries 900 Parallel Enterprise; Figure 2–12: Configure Feature Key dialog box; Figure 2–13: New Feature Key dialog box; OK. The Enable Feature Key dialog box displays.
2-18 edge switch 2/32 installation guide Installing and Configuring the Edge Switch 2/32 Configure FMS Feature Key Perform this procedure to configure the FMS feature key. This feature key enables host control of the switch from an IBM System/390 or zSeries 900 Parallel Enterprise server attached to...
Page 45 - Figure 2–14: Activate FMS feature key; Configure OSMS; To configure the open systems management server:; Figure 2–15: Configure Open Systems Management server dialog box
edge switch 2/32 installation guide 2-19 Installing and Configuring the Edge Switch 2/32 Figure 2–14: Activate FMS feature key Task 10: Configure OSMS or FICON Management Server (Optional) Perform this task to configure the open systems management server or FICON management server. Only one manageme...
Page 46 - Prohibited. If a check mark displays, host control is prohibited.; Configure FMS; To configure the FICON management server:; Figure 2–16: Configure FICON Management server dialog box
2-20 edge switch 2/32 installation guide Installing and Configuring the Edge Switch 2/32 2. Allow or prohibit host (OSI server) control by selecting Host Control Prohibited. If a check mark displays, host control is prohibited. 3. Click Activate to enable a change and allow or prohibit open systems ...
Page 47 - as shown in; Table 2–3: Code Page Choices
edge switch 2/32 installation guide 2-21 Installing and Configuring the Edge Switch 2/32 • Active = Saved—when this option is enabled, the active configuration of logical port addresses is used when the IPL configuration file is updated. If a check mark displays, the Active = Saved option is enabled...
Page 48 - Figure 2–17: Configure Date and Time dialog box; Set Date and Time Manually; To set the switch date and time manually:
2-22 edge switch 2/32 installation guide Installing and Configuring the Edge Switch 2/32 Figure 2–17: Configure Date and Time dialog box Set Date and Time Manually To set the switch date and time manually: 1. At the Configure Date and Time dialog box, click Periodic Date/Time Synchronization to dese...
Page 49 - Periodically Synchronize Date and Time; Figure 2–18: Date and Time Synced dialog box; Identify the switch to the HAFM application.
edge switch 2/32 installation guide 2-23 Installing and Configuring the Edge Switch 2/32 Periodically Synchronize Date and Time To set the switch to periodically synchronize date and time with the HAFM application: 1. Click Periodic Date/Time Synchronization to select the option (check mark in the b...
Page 50 - Configure Switch Identification; Name; Figure 2–19: Configure Identification dialog box
2-24 edge switch 2/32 installation guide Installing and Configuring the Edge Switch 2/32 • Configure switch ports. • Configure logical port addresses. • Configure SNMP trap message recipients. • Configure and enable e-mail notification. • Enable call-home notification. Configure Switch Identificatio...
Page 51 - Configuring the Switch; To set the unit offline.; Configure Switch Parameters dialog box displays, as shown in
edge switch 2/32 installation guide 2-25 Installing and Configuring the Edge Switch 2/32 c. Type a switch description of 255 alphanumeric characters or less in the Description field. d. Type the switch’s physical location (255 alphanumeric characters or less) in the Location field. e. Type the name ...
Page 52 - Figure 2–20: Configure Switch Parameters dialog box; Use information under “; Switch Parameters; Configure the following parameters as required by your fabric.; Domain ID
2-26 edge switch 2/32 installation guide Installing and Configuring the Edge Switch 2/32 Figure 2–20: Configure Switch Parameters dialog box Ordinarily, you do not need to change values in this dialog box from their defaults. The only exception is the Preferred Domain ID. Change this value if the sw...
Page 53 - Preferred
edge switch 2/32 installation guide 2-27 Installing and Configuring the Edge Switch 2/32 Preferred NOTE: To change this value, you must first set the switch offline. Choose Set Online State from the Maintenance menu to display the Set Online State dialog box, then click the Set Offline button. Be su...
Page 54 - Domain RSCNs; Click either the S/390 or Open Systems radio buttons:
2-28 edge switch 2/32 installation guide Installing and Configuring the Edge Switch 2/32 Enabling the rerouting delay ensures that frames are delivered in order through the fabric to their destination. If there is a change to the fabric topology that creates a new path (for example, a new switch is ...
Page 55 - Use; Open Systems; Configure Fabric Operating Parameters; To set the unit offline:
edge switch 2/32 installation guide 2-29 Installing and Configuring the Edge Switch 2/32 • Use Open Systems mode for all other (non-FICON) Fibre Channel environments. Configure Fabric Operating Parameters Use procedures in this section to set parameters on the switch for fabric operation through the...
Page 56 - Figure 2–21: Configure Fabric Parameters dialog box; Use information under “; Fabric Parameters
2-30 edge switch 2/32 installation guide Installing and Configuring the Edge Switch 2/32 Figure 2–21: Configure Fabric Parameters dialog box NOTE: Ordinarily, you do not need to change values in this dialog box from their defaults. The only exception is the Preferred Domain ID. Change this value if ...
Page 57 - Switch Priority
edge switch 2/32 installation guide 2-31 Installing and Configuring the Edge Switch 2/32 R_A_TOV Configure resource allocation time-out value (R_A_TOV) in tenth-of-a-second increments. This variable works with the error detect time-out value (E_D_TOV) variable to control the switch’s behavior when a...
Page 58 - Interop Mode; Select the following option:
2-32 edge switch 2/32 installation guide Installing and Configuring the Edge Switch 2/32 • If you have three switches and set two to Default and one to Never Principal, the switch with the Default setting and the lowest WWN becomes the principal switch. At least one switch in a multiswitch fabric ne...
Page 60 - Configure Port
2-34 edge switch 2/32 installation guide Installing and Configuring the Edge Switch 2/32 A right-click in the Speed column allows you to choose from a menu to set all ports to 1 Gb/sec, 2 Gb/sec, or Navigate. g. Port Binding—Click this check box to display a check mark and enable WWN binding for the...
Page 62 - Configure Ports
2-36 edge switch 2/32 installation guide Installing and Configuring the Edge Switch 2/32 e. Bound WWN—Enter a World Wide Name (WWN) in the proper format (xx.xx.xx.xx.xx.xx.xx.xx) or a nickname configured through the Product Manager application. The device with this WWN or nickname will have exclusiv...
Page 63 - Figure 2–24: Configure Addresses—Active dialog box
edge switch 2/32 installation guide 2-37 Installing and Configuring the Edge Switch 2/32 Figure 2–24: Configure Addresses—Active dialog box a. Select a blank Name field and type a descriptive port name of 24 or fewer alphanumeric characters. Use a name that reflects the device connected to the port....
Page 64 - Figure 2–25: Save Address Configuration As dialog box
2-38 edge switch 2/32 installation guide Installing and Configuring the Edge Switch 2/32 • Prohibit or allow connections for an entire row (row 0C is prohibited in the Configure Addresses—Active dialog box example), • Prohibit or allow connections for all switch ports, • Block or unblock all switch ...
Page 65 - Configure SNMP Trap Message Recipients; To configure SNMP trap recipients:; Agent. The Configure SNMP Agent dialog box displays, as shown in; Figure 2–26: Configure SNMP Agent dialog box; sysContact; . Type a decimal port number in the associated UDP Port Number; field to override the default.
edge switch 2/32 installation guide 2-39 Installing and Configuring the Edge Switch 2/32 Configure SNMP Trap Message Recipients Perform this procedure to configure community names, write authorizations, and network addresses and for up to 12 SNMP trap message recipients. A trap recipient is a manage...
Page 66 - Figure 2–27: Configure SNMP dialog box—Enable Authorization Traps; Click Activate to save the information and close the dialog box.; Configure and Enable E-mail Notification; ” on
2-40 edge switch 2/32 installation guide Installing and Configuring the Edge Switch 2/32 2. To enable transmission of trap messages to configured SNMP management workstations, click Enable Authorization Traps. A check mark displays in the box when transmission is enabled, as shown in Figure 2–27 . F...
Page 67 - Figure 2–28: Configure E-Mail dialog box; Click OK to save the information and close the dialog box.
edge switch 2/32 installation guide 2-41 Installing and Configuring the Edge Switch 2/32 Figure 2–28: Configure E-Mail dialog box a. Type the IP address or DNS host name of the SMTP server in the SMTP server field. Use 64 alphanumeric characters or less. It is recommended the IP address be used. b. ...
Page 68 - Configure and Enable Call-Home Features; You are notified of a threshold alert in four ways:; Choose Configure > Threshold Alerts to configure the following:; Active or inactive state of the alert.
2-42 edge switch 2/32 installation guide Installing and Configuring the Edge Switch 2/32 Configure and Enable Call-Home Features There are two call-home features available, and only one is installed when the HAFM application is installed on the HAFM server. To learn more about configuring Call-Home ...
Page 69 - Procedures; Figure 2–29: Configure Threshold Alerts dialog box
edge switch 2/32 installation guide 2-43 Installing and Configuring the Edge Switch 2/32 Procedures Use the following procedures to create a new threshold alert, or to modify, activate, deactivate, or delete an alert. Create New Alert 1. At the Hardware View for the selected switch, choose Configure...
Page 70 - Click New. The New Threshold Alert dialog box displays, as shown in; Figure 2–30: New Threshold Alerts dialog box—first screen
2-44 edge switch 2/32 installation guide Installing and Configuring the Edge Switch 2/32 2. Click New. The New Threshold Alert dialog box displays, as shown in Figure 2–30 . Figure 2–30: New Threshold Alerts dialog box—first screen 3. Enter a name from one to 64 characters in length. All characters ...
Page 71 - Figure 2–31: New Threshold Alerts dialog box—second screen
edge switch 2/32 installation guide 2-45 Installing and Configuring the Edge Switch 2/32 5. Click Next. A new screen displays with additional parameters. The name configured for the alert displays at the top of the screen. Click Previous to return to the previous screen, as shown in Figure 2–31 . Fi...
Page 72 - Figure 2–32: New Threshold Alerts dialog box—third screen; Either select Port Type or Port List.
2-46 edge switch 2/32 installation guide Installing and Configuring the Edge Switch 2/32 9. Click Next. A new screen displays for selecting ports for the alerts, as shown in Figure 2–32 . Figure 2–32: New Threshold Alerts dialog box—third screen 10. Either select Port Type or Port List. • If you sel...
Page 73 - Figure 2–33: New Threshold Alerts dialog box—summary screen
edge switch 2/32 installation guide 2-47 Installing and Configuring the Edge Switch 2/32 11. Click Next. A final screen displays to provide a summary of your alert configuration. To make any changes, backwards and forwards through the configuration screens by selecting Previous and Next, as shown in...
Page 74 - Modify an Alert
2-48 edge switch 2/32 installation guide Installing and Configuring the Edge Switch 2/32 Figure 2–34: Configure Threshold Alerts dialog box—alerts activated Modify an Alert Use the following steps to modify an existing threshold alert configuration. 1. Choose Configure > Threshold Alerts. The Con...
Page 75 - Perform either of the following steps:; Select Finish when you are done.; Activate or Deactivate Alerts; To change the state, select the alert information in the table.; Delete Alerts; Use the following steps to delete existing threshold alerts.
edge switch 2/32 installation guide 2-49 Installing and Configuring the Edge Switch 2/32 6. Click Next when you are done. A Modify Threshold screen displays where you can change the % utilization, cumulative minutes for the threshold to occur before notification, and the time interval for measuring ...
Page 76 - page by closing the window.; Figure 2–35: Test Remote Notification dialog box; Information dialog box displays, as shown in; . Click OK to close the; Figure 2–36: Information dialog box
2-50 edge switch 2/32 installation guide Installing and Configuring the Edge Switch 2/32 Task 13: Test Remote Notification (Optional) If the call-home and e-mail notification features are enabled, set up the HAFM application to test these remote notification features. Because the features are config...
Page 77 - Task 14: Back Up HAFM Configuration Data; Task 16: Cable Fibre Channel
edge switch 2/32 installation guide 2-51 Installing and Configuring the Edge Switch 2/32 Task 14: Back Up HAFM Configuration Data It is important to back up the HAFM configuration data. This data is used to restore the HAFM server operating environment in case of hard drive failure. Refer to the hp ...
Page 78 - Network Information; ” on page 2–6. The Username and Password Required; dialog box displays, as shown in; Figure 2–37: Username and Password Required dialog box
2-52 edge switch 2/32 installation guide Installing and Configuring the Edge Switch 2/32 3. At the browser, enter the IP address of the switch as the internet uniform resource locator (URL). Use the default IP address of 10.1.1.10, the factory preset of 10.1.1.10, or the IP address configured while ...
Page 79 - Type the default user name and password.; Figure 2–38: Embedded Web Server interface—View window
edge switch 2/32 installation guide 2-53 Installing and Configuring the Edge Switch 2/32 4. Type the default user name and password. NOTE: The default user name is Administrator and the default password is password. The user name and password are case-sensitive. 5. Click OK. The Embedded Web Server ...
Page 80 - Configure Switch Ports; To configure one or more ports:; Figure 2–39: Block or unblock a port from the Configure window
2-54 edge switch 2/32 installation guide Installing and Configuring the Edge Switch 2/32 Configure Switch Ports Perform the procedure in this section to configure names and operating characteristics for the switch ports. To configure one or more ports: 1. At the View window, click Configure at the l...
Page 81 - Your changes to the; Identification tab selected, as shown in
edge switch 2/32 installation guide 2-55 Installing and Configuring the Edge Switch 2/32 c. Choose the check box in the 10-100 km column to enable extended distance buffering for a port (default is disabled). A check mark in the box indicates extended distance operation up to 100 kilometers (through...
Page 82 - Figure 2–40: Switch page—Identification tab; Click Activate to save the information. The message
2-56 edge switch 2/32 installation guide Installing and Configuring the Edge Switch 2/32 Figure 2–40: Switch page—Identification tab a. Type a switch name of 24 alphanumeric characters or less in the Name field. Each switch should be configured with a unique name. If the switch is installed on a pub...
Page 83 - Configure Date and Time
edge switch 2/32 installation guide 2-57 Installing and Configuring the Edge Switch 2/32 Configure Date and Time Perform this procedure to configure the effective date and time for the switch. To set the date and time: 1. At the Configure window, click the Switch tab, then select Date/Time tab. The ...
Page 84 - Configure Switch and Fabric Parameters; At the Current State window, click Set Offline. The message; Your; panel opens with the Ports page displayed.
2-58 edge switch 2/32 installation guide Installing and Configuring the Edge Switch 2/32 Configure Switch and Fabric Parameters Perform this procedure to configure the following switch and fabric operating parameters: Buffer-to-Buffer Credit (BB_Credit), Error Detect Time Out Value (E_D_TOV), and Re...
Page 85 - Figure 2–42: Switch page—Parameters tab
edge switch 2/32 installation guide 2-59 Installing and Configuring the Edge Switch 2/32 Figure 2–42: Switch page—Parameters tab a. At the Preferred Domain ID field, type a value between 1 and 31 (default is 1). The domain ID uniquely identifies each switch in a fabric. All fabric-attached switches ...
Page 86 - Click Activate to save the information. The message; Set Fabric Parameters
2-60 edge switch 2/32 installation guide Installing and Configuring the Edge Switch 2/32 c. Click the Rerouting Delay check box to enable or disable the option. If a check mark displays, the option is enabled. If rerouting delay is enabled, traffic is delayed through a fabric by the specified E_D_TO...
Page 87 - Figure 2–43: Switch page—Fabric Parameters tab; Select the Interop Mode:
edge switch 2/32 installation guide 2-61 Installing and Configuring the Edge Switch 2/32 Figure 2–43: Switch page—Fabric Parameters tab a. At the BB_Credit field, type a value between 1 an 60 buffers. The default is 16. Use a value of 60 buffers only for extended distance port operation. b. At the R...
Page 88 - Configure Network Information; Configure Ports (Open Systems; Switch page displays with the Network tab selected, as shown in
2-62 edge switch 2/32 installation guide Installing and Configuring the Edge Switch 2/32 — HP Fabric 1.0. Default. Select this mode if the fabric contains only HP switches and switches that are operating in HP Fabric 1.0 mode. — Open Fabric 1.0. Select this mode if the fabric contains HP directors a...
Page 89 - Figure 2–44: Switch page—Network tab
edge switch 2/32 installation guide 2-63 Installing and Configuring the Edge Switch 2/32 Figure 2–44: Switch page—Network tab a. At the IP Address field, type the new value as specified by the customer’s network administrator (default is 10.1.1.10, factory preset is 10.1.1.10). b. At the Subnet Mask...
Page 90 - shown in; Figure 2–45: Network configuration changes activated; arp; Username and Password Required dialog box displays.
2-64 edge switch 2/32 installation guide Installing and Configuring the Edge Switch 2/32 3. Click Activate to save the information. The following message box displays, as shown in Figure 2–45 . Figure 2–45: Network configuration changes activated 4. Update the address resolution protocol (ARP) table...
Page 91 - Type the default user name and password.; with the Ports tab displayed.
edge switch 2/32 installation guide 2-65 Installing and Configuring the Edge Switch 2/32 7. Type the default user name and password. NOTE: The default user name is Administrator and the default password is password. The user name and password are case-sensitive. 8. Click OK. The Embedded Web Server ...
Page 92 - Figure 2–46: Management page—SNMP tab
2-66 edge switch 2/32 installation guide Installing and Configuring the Edge Switch 2/32 Figure 2–46: Management page—SNMP tab a. For each trap recipient to be configured, type a community name of 32 alphanumeric characters or less in the associated Community Name field. The community name is incorp...
Page 93 - Click Activate to save the information. The message; Configure User Rights; To configure passwords:; For the Administrator set of data fields:
edge switch 2/32 installation guide 2-67 Installing and Configuring the Edge Switch 2/32 3. Click Activate to save the information. The message Your changes to the SNMP configuration have been successfully activated displays. Configure User Rights Perform this procedure to configure the administrato...
Page 94 - Figure 2–47: User Rights page; Click Activate to save the information. The message
2-68 edge switch 2/32 installation guide Installing and Configuring the Edge Switch 2/32 c. Type the administrator password again in the Confirm New Password field, as shown in Figure 2–47 . Figure 2–47: User Rights page 3. For the Operator set of data fields: a. Type the operator user name (as spec...
Page 95 - Task 16: Cable Fibre Channel Ports; with port 0 and continue sequentially to the left through port 31.
edge switch 2/32 installation guide 2-69 Installing and Configuring the Edge Switch 2/32 Task 16: Cable Fibre Channel Ports Perform this task to connect devices to the switch. To cable Fibre Channel ports: 1. Route singlemode or multimode fiber-optic cables (depending on the type of SFP pluggable op...
Page 96 - If the switch is managed by an attached HAFM server, go to; Hardware View page for the selected switch displays.; Figure 2–48: Port Properties dialog box
2-70 edge switch 2/32 installation guide Installing and Configuring the Edge Switch 2/32 5. Connect the switch-attached fiber-optic cable to the port SFP transceiver. 6. If the switch is managed by an attached HAFM server, go to step 7 . If the switch is managed by the Embedded Web Server interface:...
Page 99 - Configure menus of the Product Manager; Unpack and Inspect the Optics; Unpack and inspect the optics as follows:; Edge Switch 2/32 Upgrade
edge switch 2/32 installation guide 3–1 3 Flexport Upgrade Instructions This chapter provides instructions for upgrading the edge switch 2/32 from 16 ports to 24 ports and from 24 ports to 32 ports by installing the Edge Switch 2/32 flexport upgrade kit, see Table 1–1 on page 1–11. Each port expansi...
Page 100 - Upgrading to 24 Ports; step a; Figure 3–1: Edge Switch 2/32 port locations
3–2 edge switch 2/32 installation guide Flexport Upgrade Instructions Upgrading to 24 Ports Ports 0 through 15 should already be populated (see Figure 3–1 , 3 ). 1. Insert 8 new optical transceivers into ports 16 through 23 (see Figure 3–1 , 2 ) as follows: a. To install a new SFP transceiver, posit...
Page 101 - Upgrading to 32 Ports; Ports 0 through 23 should already be populated (see
edge switch 2/32 installation guide 3–3 Flexport Upgrade Instructions Upgrading to 32 Ports Ports 0 through 23 should already be populated (see Figure 3–1 , 2 and 3 ). 1. Insert 8 new optical transceivers into ports 24 through 31 (see Figure 3–1 , 1 ). a. To install a new SFP transceiver, position o...
Page 102 - Feature Key dialog box displays, as shown in; Figure 3–2: Configure Feature Key dialog box; Figure 3–3: New Feature Key dialog box; The Enable Feature Key dialog box displays, as shown in; Figure 3–4: Enable Feature Key dialog box
3–4 edge switch 2/32 installation guide Flexport Upgrade Instructions 2. Choose Features from the Configure menu on the menu bar. The Configure Feature Key dialog box displays, as shown in Figure 3–2 . Figure 3–2: Configure Feature Key dialog box 3. Click New to add a new feature key. The New Featur...
Page 103 - Click Activate to activate the new feature key.
edge switch 2/32 installation guide 3–5 Flexport Upgrade Instructions The Enable Feature Key dialog box displays with a warning, stating that this action will override the current set of features on the switch. If features are enabled on the switch, they will be listed in the left column.The list on...
Page 105 - Regulatory Compliance Notices; This appendix covers the following topics:; Regulatory Compliance ID Numbers
edge switch 2/32 installation guide A–1 A Regulatory Compliance Notices This appendix covers the following topics: • Regulatory Compliance ID Numbers , page A–1 • Federal Communications Commission Notice , page A–2 • Canadian Notice (Avis Canadien) , page A–4 • European Union Notice , page A–4 • Jap...
Page 106 - Federal Communications Commission Notice; Class A Equipment
A–2 edge switch 2/32 installation guide Regulatory Compliance Notices Federal Communications Commission Notice Part 15 of the Federal Communications Commission (FCC) Rules and Regulations has established Radio Frequency (RF) emission limits to provide an interference-free radio frequency spectrum. M...
Page 107 - Reorient or relocate the receiving antenna.; Modifications
edge switch 2/32 installation guide A–3 Regulatory Compliance Notices • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the ...
Page 108 - European Union Notice
A–4 edge switch 2/32 installation guide Regulatory Compliance Notices IEC EMC Statement (Worldwide) This is a Class A product. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures. Spécification ATI Classe A (France) DE...
Page 109 - Japanese Notice
edge switch 2/32 installation guide A–5 Regulatory Compliance Notices • EN55024 1998 (IEC61000-4-2, IEC61000-4-3, IEC61000-4-4, IEC61000-4-5, IEC61000-4-6, IEC61000-4-8, IEC61000-4-11)-Electromagnetic Immunity • EN60950 (IEC60950)-Product Safety • Power Quality: (IEC610000-3-2)-Harmonics and (IEC610...
Page 110 - German Noise Declaration; LASERTURVALLISUUS
A–6 edge switch 2/32 installation guide Regulatory Compliance Notices Harmonics Conformance (Japan) German Noise Declaration Schalldruckpegel Lp = 66.8 dB(A)Am Arbeitsplatz (operator position)Normaler Betrieb (normal operation)Nach ISO 7779:1988 / EN 27779:1991 (Typprüfung) Laser Safety WARNING: To ...
Page 111 - Certification and Classification Information
edge switch 2/32 installation guide A–7 Regulatory Compliance Notices Laitteen käyttäminen muulla kuin käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle. VARNING ! Om apparaten används på annat sätt än i bruksanvisning specif...
Page 112 - The OLM includes the following certifications:
The OLM includes the following certifications: • UL Recognized Component (USA) • CSA Certified Component (Canada) • TUV Certified Component (European Union) • CB Certificate (Worldwide) The following figure shows the Class 1 information label that appears on the metal cover of the OLM housing.
Page 113 - Declaration of Conformity; The Declaration of Conformity is shown on the next page.
edge switch 2/32 installation guide A–9 Regulatory Compliance Notices Declaration of Conformity The Declaration of Conformity is shown on the next page.
Page 115 - Technical Specifications; This appendix contains the following information:; Factory Defaults; Item
edge switch 2/32 installation guide B–1 B Technical Specifications This appendix contains the following information: • Factory Defaults , page B–1 • Physical Dimensions , page B–3 • Environmental Specifications , page B–4 • Power Requirements , page B–4 • Operating Tolerances , page B–4 • Laser Info...
Page 116 - Configuration
B–2 edge switch 2/32 installation guide Technical Specifications Table B–2: Switch Factory-Default Values for Reset Configuration Option Configuration Description Default Identification Switch Name NULL string Switch Description “Fibre Channel Switch” Switch Contact “End User Contact (please configu...
Page 117 - Physical Dimensions; Table B–3
edge switch 2/32 installation guide B–3 Technical Specifications Physical Dimensions Table B–3 lists edge switch 2/32 dimensions. SNMP SNMP Communities “public” — 5 NULL strings SNMP Write Authorizations Read only per community Trap Recipient IP Addressees 0 for each UDP Por t 162 SNMP Authorization...
Page 118 - Environmental Specifications; Figure B–4; Power Requirements; Table B–5; Operating Tolerances; Table B–6
Environmental Specifications Figure B–4 lists environmental ranges for shipping, storing, and operating the hp StorageWorks edge switch 2/32. Power Requirements Table B–5 lists edge switch 2/32 power requirements. Operating Tolerances Table B–6 lists heating and cooling specifications, shock toleran...
Page 119 - Laser Information
edge switch 2/32 installation guide B–5 Technical Specifications Laser Information Three configurations of cards with fixed optics will be provided for each of the connector types: four extended long-wave ports, four long-wave ports, and four short-wave ports. Table B–7: Laser specs — 2 Gb Shock and...
Page 121 - Glossary; The following cross-references are used in this glossary:
edge switch 2/32 installation guide Glossary–1 Glossary This glossary defines terms used in this guide or in other guides in this series, and is not a comprehensive glossary of computer terms. The following cross-references are used in this glossary: Contrast with. This refers to a term that has an ...
Page 122 - Send a transmission to all N_Ports on a fabric.
Glossary–2 edge switch 2/32 installation guide Glossary backplane The backplane provides 48 VDC power distribution and connections for all logic cards. backup FRU When an active FRU fails, an identical backup FRU takes over operation automatically (failover) to maintain director and Fibre Channel li...
Page 124 - See optical fiber connector.
Glossary–4 edge switch 2/32 installation guide Glossary configuration data Configuration data includes: identification data, port configuration data, operating parameters, SNMP configuration, and zoning configuration. A configuration backup file is required to restore configuration data if the CTP2 ...
Page 125 - See destination address.
edge switch 2/32 installation guide Glossary–5 Glossary default Pertaining to an attribute, value, or option that is assumed when none is explicitly specified. default zone Contains all attached devices that are not members of a separate zone. destination address Address identifier that indicates th...
Page 127 - Any active director or node in a switched fabric.
edge switch 2/32 installation guide Glossary–7 Glossary fabric element Any active director or node in a switched fabric. fabric port Physical interface within the fabric that connects to an N_Port through a point-to-point full duplex connection. failover Automatic and non-disruptive transition of fu...
Page 128 - See fiber port module card.
Glossary–8 edge switch 2/32 installation guide Glossary FPM See fiber port module card. F_Port See fabric port. FRU See field-replaceable unit. gateway A multi-homed host used to route network traffic from one network to another, and to pass network traffic from one protocol to another. gateway addr...
Page 129 - A fabric consisting of only HP products.
edge switch 2/32 installation guide Glossary–9 Glossary homogeneous fabric A fabric consisting of only HP products. hop count The number of hops a unit of information traverses in a fabric. host bus adapter Logic card that provides a link between the server and storage subsystem, and that integrates...
Page 130 - See internet protocol address.
Glossary–10 edge switch 2/32 installation guide Glossary interswitch link Also known as ISL. Physical E_Port connection between two directors in a fabric. I/O configuration See input/output configuration. IOCDS A data set that contains an I/O configuration definition built by the IOCP. IOCP See inpu...
Page 131 - See logical unit number.
edge switch 2/32 installation guide Glossary–11 Glossary logical unit number Also known as LUN. In Fibre Channel addressing, a logical unit number is a number assigned to a storage device which, in combination with the storage device’s node port’s world wide name, represents a unique identifier for ...
Page 132 - See offline sequence.
Glossary–12 edge switch 2/32 installation guide Glossary multi-switch fabric Fibre Channel fabric created by linking more than one director or fabric switching device within a fabric. name server Program that translates names from one form into another. Domain name servers (DNS) translate domain nam...
Page 133 - In a network, any route between any two ports.
edge switch 2/32 installation guide Glossary–13 Glossary Offline—when the director is set offline, all ports are set offline. The director transmits the offline sequence (OLS) to attached devices, and the devices cannot log in to the director. operating state (port) Valid states include Online, Offl...
Page 134 - Series of self-tests executed each time the unit is booted or reset.
Glossary–14 edge switch 2/32 installation guide Glossary persistent binding A form of server-level access control that uses configuration information to bind a server to a specific Fibre Channel storage volume (or logical device) using a unit number. port Receptacle on a device to which a cable lead...
Page 135 - See storage area network.
edge switch 2/32 installation guide Glossary–15 Glossary remote access link Connection to a device or program on a computer network via a (geographically) remote workstation. remote notification A process by which a system is able to inform remote users and/or workstations of certain classes of even...
Page 136 - See system services processor.
Glossary–16 edge switch 2/32 installation guide Glossary SNMP community Also known as SNMP community string. SNMP community is a cluster of managed products (in SNMP terminology, hosts) to which the server or managed product running the SNMP agent belongs. SNMP community name The name assigned to a ...
Page 137 - See universal port module card.
edge switch 2/32 installation guide Glossary–17 Glossary unblocked port Devices attached to an unblocked port can login to the director and communicate with devices attached to any other unblocked port assuming that this is supported by the current zoning configuration. unicast Communication between...
Page 138 - zone member
Glossary–18 edge switch 2/32 installation guide Glossary zone member Specification of a device to be included in a zone. A zone member can be identified by the port number of the director to which it is attached or by its world wide name. In multi-switch fabrics, identification of end-devices/nodes ...
Page 139 - Index
edge switch 2/32 installation guide Index–1 Index 10/100 Mbps LAN connectors 1–11 A active zone set state, default value B–3 additional port function configuring 2–16 reset by configuration reset 2–6 addresses, director default values B–2 alerts, introduction 1–3 audience ix B BB_Credit default valu...
