Page 2 - Important Safety Information; Copyright Notice
2 Important Safety Information WARNING : Never look into the projector lens when the lamp is turned on; the bright light can damage your eyes. Never let children look into the lens when it is on. Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical voltages ...
Page 3 - Contents; Welcome
3 Contents Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Using Your Documentation . . . . . . . . . . . . . . . . . . . . . . . . . 8 Getting More Information . . . . . . . . . . . . . . . . . . . . . . . 8 Registration and Warranty . . . . . . . . . . . . . . ....
Page 4 - Using the Remote Control
4 Contents 2 Using the Remote Control . . . . . . . . . . . . . . . . . . 27 Using the Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . 28 Replacing the Batteries . . . . . . . . . . . . . . . . . . . . . . . . . 28 Controlling the Picture and Sound . . . . . . . . . . . . . . . . . ...
Page 5 - Fine-Tuning the Projector
Contents 5 4 Fine-Tuning the Projector . . . . . . . . . . . . . . . . . . 45 Using the Menu System . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Restoring the Default Settings . . . . . . . . . . . . . . . . . . . 47 Adjusting the Image . . . . . . . . . . . . . . . . . . . . . . . . ....
Page 6 - Projector Installation
6 Contents A Projector Installation . . . . . . . . . . . . . . . . . . . . . . . 81 B Technical Specifications . . . . . . . . . . . . . . . . . . . . 83 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83Projection Lamp . . . . . . . . . . . . . . . . . . . ....
Page 7 - Easy control
7 - Welcome T he Epson ® PowerLite ® 760c is an easy-to-use projector that weighs less than 4 pounds. The projector offers up to 2500 lumens of brightness. You can connect it to a wide range of computers and video sources. Easy control The projector’s keystone correction feature automatically correc...
Page 8 - Using Your Documentation; Getting More Information
8 Welcome Using Your Documentation This book contains all the information you need to set up and use your projector. Please follow these guidelines as you read through it: ■ Warnings must be followed carefully to avoid bodily injury. ■ Cautions must be observed to avoid damage to your equipment. ■ N...
Page 9 - Registration and Warranty
Welcome 9 ■ If you still need help after checking this User’s Guide and the sources listed above, you can use the Epson PrivateLine Support service to get help fast. Call (800) 637-7661 and enter the PIN on the card in your Start Here kit. Or take advantage of Epson’s automated support services 24 h...
Page 10 - Unpacking the Projector; Additional Components
10 Welcome Unpacking the Projector After unpacking the projector, make sure you have all the parts shown below: Save all packaging in case you need to ship the projector. Always use the original packaging (or the equivalent) when you need to send the projector to another location. If you are moving ...
Page 11 - Optional Accessories
Welcome 11 ■ Some older PowerBooks ® and Macintosh ® desktop models may need the Macintosh desktop adapter set shown on page 37 (available from Epson; see below). Older iMac ® systems may need a special adapter to provide a VGA output port; see your computer dealer. Optional Accessories To enhance y...
Page 14 - Positioning the Projector; note; TBD
14 Displaying and Adjusting the Image Positioning the Projector If the projector isn’t already installed in the room you’re using, you’ll probably want to place it on a table in front of the screen, as shown. This lets you stand in the front of the room, face the audience, and remain close enough to...
Page 16 - Projecting the Image; Turning On the Projector
16 Displaying and Adjusting the Image Projecting the Image Make sure your projector and other equipment are set up as described on page 35. Then follow the instructions below to start the projector and display an image. Turning On the Projector Turn on any connected computer or video equipment befor...
Page 17 - Selecting the Image Source; warning
Displaying and Adjusting the Image 17 3. Press the red P Power button on the remote control or on top of the projector. The projector beeps once and the Power light flashes green as the projector warms up, then an image begins to appear. When the Power light stops flashing and remains green, the pro...
Page 18 - Troubleshooting Display Problems; You Can’t Project an Image; If you’re using a PC notebook:
18 Displaying and Adjusting the Image Troubleshooting Display Problems Follow these guidelines if you’re having trouble displaying an image. You Can’t Project an Image If you don’t see the image you are trying to project, try the following: ■ Make sure the cables are connected correctly, as describe...
Page 19 - If you’re using Macintosh OS X:
Displaying and Adjusting the Image 19 ■ If the function key doesn’t permit you to display simultaneously on both screens, you should check your monitor settings to make sure both the LCD screen and the external monitor port are enabled. From the Control Panel, open the Display utility. In the Displa...
Page 21 - Adjusting the Image; Adjusting the Height of Your Image
Displaying and Adjusting the Image 21 Adjusting the Image Once you see your image, you need to make certain adjustments: ■ If the image is too high or too low, you can reposition it. See below. ■ To focus or zoom your image, see page 22. ■ If the image isn’t square, see page 22. ■ If a computer imag...
Page 22 - Focusing and Zooming Your Image; Adjusting the Image Shape
22 Displaying and Adjusting the Image Focusing and Zooming Your Image Turn the focus ring on the projector to sharpen the image. Turn the zoom ring on the projector to reduce or enlarge the image. If the image still isn’t large enough, you may need to move the projector farther away from the screen....
Page 23 - Using Keystone Correction
Displaying and Adjusting the Image 23 If your image is still distorted, you can correct it using the Keystone buttons on the projector’s control panel or the projector’s Setting menu. Using Keystone Correction To adjust your image when it is wider on the top or bottom, do the following: ■ Press one ...
Page 24 - Correcting Computer Images; Shutting Down the Projector
24 Displaying and Adjusting the Image Correcting Computer Images If you’re connected to a computer and the image doesn’t look right, press the Auto button on the remote control or the Enter button on the projector. This automatically resets the projector’s tracking, sync, resolution, and position se...
Page 25 - Using the Direct Power On Function; caution
Displaying and Adjusting the Image 25 3. Press the P Power button again. The lamp turns off. When the projector beeps twice (after about 3 seconds), you can unplug the power cord. (If the projector is mounted on the ceiling, you will need to wait 10 seconds for the projector to cool down before you ...
Page 28 - Replacing the Batteries
28 Using the Remote Control Using the Remote Control Follow these tips for using the remote control: ■ Point the remote control at the front of the projector or at the screen. ■ Stand within 20 feet of the projector. ■ Avoid using the remote under bright fluorescent lamps or in direct sunlight, or t...
Page 29 - Controlling the Picture and Sound; Switching Between Picture Sources
Using the Remote Control 29 Controlling the Picture and Sound You can use the remote control to preview and select your picture sources, temporarily turn off the picture and sound, freeze the action, zoom in on the picture, and adjust the volume. Switching Between Picture Sources If your projector i...
Page 30 - Turning Off the Picture and Sound
30 Using the Remote Control Turning Off the Picture and Sound You can use the A/V Mute button on the remote control to turn off the image and sound. This feature is useful if you want to temporarily redirect your audience’s attention. ■ To turn off the picture, press the A/V Mute button. The screen ...
Page 31 - Zooming Part of Your Image; Controlling the Volume
Using the Remote Control 31 Zooming Part of Your Image You can zoom in on a portion of the image using the E-Zoom buttons on the remote control. 1. Press the E-Zoom button on the remote control. You see a crosshair indicating the center of the zoom-in area. 2. Use the pointer button to position the ...
Page 32 - Resizing Video images
32 Using the Remote Control Resizing Video images You can use the Resize button on the remote control to adjust how an image fits into the display area. For video images, press Resize to switch the aspect ratio between 4:3 and 16:9. This lets you play certain digital video images or movies recorded ...
Page 34 - Highlighting Your Presentation; Using the Pointer Tool
34 Using the Remote Control Highlighting Your Presentation You can display a pointer to call out important information on the screen. If you want to customize the pointer tool, you can choose from three alternative shapes. Using the Pointer Tool 1. To activate the pointer tool, press the Pointer but...
Page 36 - Connecting to a Computer; Connecting to the Computer Port
36 Connecting to Computers and Other Equipment Connecting to a Computer You can connect the PowerLite projector to any computer that has a standard video output (monitor) port, including desktop models, PC notebook and notebook computers, Macintosh PowerBooks and iBooks, ® and hand-held devices. To ...
Page 37 - Using the Macintosh Desktop Adapter
Connecting to Computers and Other Equipment 37 3. When you’ve finished making any connections, see page 16 for instructions on turning on the projector and adjusting the image. Using the Macintosh Desktop Adapter If you have an older desktop Macintosh or PowerBook, the VGA cable may not fit when you...
Page 39 - Connecting to Video Equipment
Connecting to Computers and Other Equipment 39 Connecting to Video Equipment You can connect several video sources to the projector at the same time. Before starting, look at your video equipment to determine its available video output connections: ■ If your video player has a yellow RCA-style video...
Page 40 - Connecting a Composite Video Source
40 Connecting to Computers and Other Equipment Connecting a Composite Video Source 1. Locate an RCA-style video cable (one is usually provided with your video equipment or you can purchase one from an electronics dealer). 2. Connect the cable to the yellow video output connector on your player and t...
Page 41 - Connecting an S-Video Source
Connecting to Computers and Other Equipment 41 Connecting an S-Video Source 1. Locate an S-Video cable (one is usually provided with your video equipment or you can purchase one from Epson; see page 10). 2. Connect the cable to the S-Video connector on your player and the S-Video connector on the pr...
Page 42 - Connecting a Component Video Source
42 Connecting to Computers and Other Equipment Connecting a Component Video Source You will need a component-to-VGA video cable or a component video-to-VGA adapter for this connection. You can order this cable (ELPKC19) from Epson; see page 11 for more information. 1. Locate a component-to-VGA video...
Page 43 - Connecting an RGB Video Source
Connecting to Computers and Other Equipment 43 Connecting an RGB Video Source 1. Locate the VGA computer cable provided with the projector. 2. Connect the cable to the video port on your player and the Computer/Component port on the projector. 3. If you want to play sound through the projector, see ...
Page 44 - Playing Sound Through the Projector
44 Connecting to Computers and Other Equipment Playing Sound Through the Projector You can play sound through the projector’s speaker system. To play sound through the projector, follow these steps: 1. Locate the appropriate cable and connect it to the Audio jack on the projector. ■ If you have a co...
Page 46 - Using the Menu System
46 Fine-Tuning the Projector Using the Menu System You can use the remote control or the projector’s control panel to access the menus and change settings. Follow these steps: 1. To display the menu screen, press the Menu button on the remote control or on the projector. You see a menu screen simila...
Page 47 - Restoring the Default Settings
Fine-Tuning the Projector 47 4. After highlighting the option you want to adjust, use the pointer button to change the setting. In some cases, you may have to press the Enter button to view a sub-screen for changing the setting. ■ Press the left or right side of the pointer button to adjust a slider...
Page 49 - Adjusting Signal Settings
Fine-Tuning the Projector 49 ■ Brightness Lightens or darkens the overall image. ■ Contrast Adjusts the difference between light and dark areas. ■ Color Intensity (video only) Adjusts the color depth of the image. ■ Tint (video only) Adjusts the balance of green to magenta in the image (available on...
Page 50 - tip
50 Fine-Tuning the Projector 2. Use the pointer button to highlight the desired option, then adjust it as needed: ■ Auto Setup Leave this setting ON to automatically optimize the computer image. Turn it off if you want to save adjustments you have made to the video settings. ■ Tracking Adjust this v...
Page 51 - Customizing Projector Features
Fine-Tuning the Projector 51 Customizing Projector Features You can use the Settings menu to lock the buttons on the projector, adjust audio volume, and customize several other features. ■ Keystone Squares up the shape of the image after the projector has been tilted upward. If you notice lines or e...
Page 52 - Using the Projector Security Features; Enabling Password Protection
52 Fine-Tuning the Projector ■ Volume Raises or lowers the volume of the projector’s speaker. ■ EasyMP Audio Out The PowerLite 740c does not support EasyMP. Using the Projector Security Features To prevent unauthorized use of the projector, you can do the following: ■ Assign a password; this can be ...
Page 54 - Starting the Projector with a Password
54 Fine-Tuning the Projector The countdown for the elapsed time begins as soon as you close the Password Protect menu. (You can check the elapsed time in this menu next to Time elapsed .) 10. To enable your screen logo, select User’s Logo Protect and press Enter . Select ON and press Enter . When th...
Page 55 - Creating Your Own Startup Screen; Capturing the Image
Fine-Tuning the Projector 55 When you see the Password Protect Release screen again, you can try to enter the correct password. If you enter an incorrect password 30 times in succession, the projector remains locked and you must contact Epson to unlock it. If you have forgotten the password, contact...
Page 56 - Choosing When to Display the Image
56 Fine-Tuning the Projector 3. When you see a message asking whether you accept the present image as the user’s logo, select Yes and press Enter . A selection box displays over the image. 4. Use the pointer button to select the area of the image you want to use. Then press Enter . 5. When you see t...
Page 57 - Disabling the Projector’s Buttons; Customizing Power and Operation
Fine-Tuning the Projector 57 Disabling the Projector’s Buttons When you enable the Operation Lock function, you can lock all the projector’s buttons except the Power button. 1. Press the Menu button, highlight the Setting menu, and press Enter . 2. Select Operation Lock and press the Enter button. 3...
Page 59 - Maintaining the Projector
59 1 Maintaining the Projector Y our projector needs little maintenance. All you have to do is keep the lens clean and periodically clean the air filters at the side and bottom of the projector. A clogged air filter can block ventilation needed to cool the projector. The only parts you should replac...
Page 60 - Cleaning the Lens; Cleaning the Projector Case
60 Maintaining the Projector Cleaning the Lens Clean the lens whenever you notice dirt or dust on the surface. Use a canister of compressed air to remove dust. To remove dirt or smears on the lens, use lens-cleaning tissue. If necessary, moisten a soft cloth with lens cleaner and gently wipe the len...
Page 61 - Cleaning the Air Filters and Vents
Maintaining the Projector 61 Cleaning the Air Filters and Vents Clean the air filters and air intake vents after every 100 hours of use. If they are not cleaned periodically, they can become clogged with dust, preventing proper ventilation. This can cause overheating and damage the projector. Follow...
Page 62 - Replacing the Lamp and Air Filter
62 Maintaining the Projector Replacing the Lamp and Air Filter The life span of the projection lamp is about 2000 hours if Brightness Control in the Setting menu is set to High (default), and 3000 hours if Brightness Control is set to Low . It is time to replace the lamp when: ■ The projected image ...
Page 65 - Resetting the Lamp Timer
Maintaining the Projector 65 Resetting the Lamp Timer After you replace the lamp, you need to reset the lamp timer using the projector’s menus. 1. Press the Menu button on the remote control or on the projector’s control panel. You see the main menu. 2. Use the pointer button on the remote control (...
Page 66 - Transporting the Projector
66 Maintaining the Projector Transporting the Projector The projector contains many glass and precision parts. Follow these guidelines to prevent damage: ■ When shipping the projector for repairs, use the original packaging material if possible. If you do not have the original packaging, use equival...
Page 67 - Solving Problems
67 1 Solving Problems T his chapter helps you solve problems with your projector, and tells you how to contact technical support for problems you can’t solve yourself. The following information is included: ■ Using the projector’s on-screen help system ■ What to do when the projector’s status lights...
Page 69 - Checking Projector Status; What To Do When the Lights Flash
Solving Problems 69 Checking Projector Status If your projector isn’t working correctly, first turn it off, wait for it to cool (the Power light stops flashing orange), and unplug it. Then plug the power cord back in and turn on the projector. If this doesn’t solve the problem, check the lights on t...
Page 71 - Viewing Lamp Usage and Other Information; Solving Projector Operation Problems; The power doesn’t turn on.
Solving Problems 71 Viewing Lamp Usage and Other Information Use the Info menu to view information about the display settings of your computer and the number of hours the lamp has been used. Press the Menu button and highlight the Info menu. You see the lamp usage hours and various input signal sett...
Page 72 - No image appears on the screen.
72 Solving Problems Solving Problems with the Image or Sound No image appears on the screen. ■ Check that the Power light is green, not flashing, and the lens cap is off. ■ The projector may be in standby or sleep mode. If the Power light is orange, press the P Power button to turn the projector on....
Page 74 - The message
74 Solving Problems The message Not Supported is displayed. ■ Make sure the correct input signal is selected in the Signal menu (see page 49). ■ Make sure your computer’s resolution doesn’t exceed UXGA (1600 × 1200) and the frequency is supported by the projector (see page 85). If necessary, change ...
Page 75 - The image contains static or noise.
Solving Problems 75 The image isn’t square, but keystone-shaped. ■ If the top or bottom of the image is broader, press the or button on the projector until the image is square. ■ If the projector is angled toward the screen from the left or right, the image will be broader on one side. Center the pr...
Page 76 - The image is too light or dark, or colors are incorrect.
76 Solving Problems You see vertical bands or the image still looks blurry after trying the solutions in the previous section. ■ If you’re projecting from a computer and displaying an image that contains a lot of fine detail, you may notice vertical bands or some of the characters may look heavy or ...
Page 77 - There is no sound, or the sound is not loud enough.
Solving Problems 77 ■ Try adjusting the Brightness and Contrast settings on the Image menu. ■ Check your computer display settings to correct the color balance. ■ The projector’s lamp may need to be replaced. See page 62 for instructions. There is no sound, or the sound is not loud enough. ■ Press t...
Page 78 - The projector doesn’t respond to remote control commands.; Where To Get Help
78 Solving Problems Solving Problems with the Remote Control The projector doesn’t respond to remote control commands. ■ The remote control’s batteries may not be installed correctly or may be low on power. To change the batteries, see page 28. ■ Make sure you are within about 20 feet (6 meters) of ...
Page 79 - Telephone Support Services
Solving Problems 79 Telephone Support Services To use the Epson PrivateLine Support service, call (800) 637-7661 and enter the PIN on the Epson PrivateLine Support card included in your Start Here kit. This is the fastest way of speaking to a live representative, and it’s free. This service is avail...
Page 83 - Technical Specifications; General
83 A Technical Specifications General Type of display Epson poly-silicon TFT active matrix Resolution(native format) 1024 × 768 pixels (XGA) Color reproduction 24 bit, 16.8 million colors Brightness 2500 lumens (High Brightness mode)2000 lumens (Low Brightness mode) Contrast ratio 400:1 Image size 3...
Page 84 - Projection Lamp
84 Technical Specifications Projection Lamp Type UHE (Ultra High Efficiency) Power consumption 170 W Lamp life Approx. 2000 hours (High Brightness mode)Approx. 3000 hours (Low Brightness mode) Part number V13H010L32 Remote Control Range 20 feet (6 meters) Batteries (2) Alkaline AAA Dimensions Height...
Page 85 - Safety
Technical Specifications 85 Safety United States FCC 47CFR Part 15B Class B (DoC)UL60950 Third Edition Canada ICES-003 Class BCSA C22.2 No. 60950 CE Marking Directive 73/23/EECDirective 89/336/EECIEC 60950 Third EditionEN 55022, EN 55024 Pixelworks ™ DNX ™ ICs are used in this projector. Compatible ...
Page 87 - Notices; Important Safety Instructions
87 A Notices T his appendix includes safety instructions and other important information about your Epson PowerLite projector. Important Safety Instructions Follow these safety instructions when setting up and using the projector: ■ Do not place the projector on an unstable cart, stand, or table. ■ ...
Page 89 - Remote Control Information
Notices 89 Remote Control Information You can operate the projector by remote control via a line-of-sight infrared (IR) receiver at the front and rear of the projector. The projector may not respond to remote control commands under the following conditions: ■ There is an object between the remote co...
Page 90 - Declaration of Conformity
90 Notices Declaration of Conformity According to 47CFR, Part 2 and 15, Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers We: Epson America, Inc. Located at: 3840 Kilroy Airport WayMS: 3-13Long Beach, CA 90806-2469 Telephone: (562) ...
Page 91 - FCC Compliance Statement; For United States Users
Notices 91 FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential ...
Page 92 - Warranty
92 Notices Warranty Epson America, Inc. Limited Warranty Basic Two-Year Warranty and 90-Day Lamp Warranty What Is Covered: Epson America, Inc. (“Epson”) warrants to the original retail purchaser of the Epson product enclosed with this limited warranty statement that the product, if purchased new and...
Page 95 - Index
Index 95 Index A A/V Mute, 30, 56, 72Accessories, 11, 79Adapter audio, 10, 44Macintosh, 11, 37 Air filter cleaning, 61ordering, 11replacing, 62 to 64 Anti-theft device, 11, 15Aspect ratio, 83Audio adapter, 10, 44controlling volume, 31problems, troubleshooting, 77turning off (using A/V Mute), 30 Auto...
