HP 3C905-TX - Manuals - manualsarea.com

Page 2 - Notice; is a trademark of Intel Corporation.

Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not ...

Page 3 - Connecting to a Netware 3.12 server; Requirements

Connecting to a Netware 3.12 server Windows for Workgroups Connecting to a Netware 3.12 server Windows forWorkgroups Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • 3COM Etherlink 3C905 Ethernet card and drivers disk ver 2.1. • Vectra VL8 Driver Name: 3C90X.LAN Size...

Page 6 - Windows 95 SR2 Requirements

Connecting to a Netware 3.12 server Windows 95 SR2 Connecting to a Netware 3.12 server Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2 installed. • 3COM Etherlink 3C905 Ethernet card and drivers disk ver 2.1. • File Name: OEMSETUP.INF Size: 41KB Date: 3/14/97 • Windows 95 SR2 media. (If ...

Page 8 - At the “Insert Disk” notification, click on “OK.”

Connecting to a Netware 3.12 server Windows 95 SR2 and click on “Close.” (If you do not have a Computer name, Workgroup name and Computer description, contact your network administrator.) 18 At the “Insert Disk” notification, click on “OK.” 19 Set the path to your Windows 95 SR2 media and click on “...

Page 9 - Connecting to a Netware 4.1 server; Windows for Workgroups Requirements

Connecting to a Netware 4.1 server Windows for Workgroups Connecting to a Netware 4.1 server Windows for Workgroups Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • 3COM Etherlink 3C905 Ethernet card and drivers disk ver 2.1. • Vectra VL8 Driver name: 3C90X.LAN Size:...

Page 13 - Procedure

Connecting to a Netware 4.1 server Windows 95 SR2 Procedure 1 With the HP Vectra turned off, install the 3COM Etherlink III 3C905 adapter card into a PCI slot. 2 Power on the machine and restart Windows 95 SR2 in MS-DOS Mode. 3 Insert the 3COM drivers diskette (ver. 2.1 downloaded from 3COM’s Web si...

Page 14 - At the “Network” dialogue box, click on the “Identification” folder.

Connecting to a Netware 4.1 server Windows 95 SR2 16 At the “Network” dialogue box, click on the “Identification” folder. 17 Enter your “Computer Name,” “Workgroup,” and “Computer Description” and click on “Close.” (If you do not have a Computer name, Workgroup name and Computer description, contact...

Page 15 - Connecting to a Windows NT Server 3.51

Connecting to a Windows NT Server 3.51 Windows for Workgroups Ver. 3.11 Connecting to a Windows NT Server 3.51 Windows for Workgroups Ver. 3.11 Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • 3COM Etherlink 3C905 Ethernet card and drivers disk ver. 4.3. • NDIS Drive...

Page 26 - Finish the network card installation by clicking on “Next.”

Connecting to a Windows NT Server 3.51 Windows NT Workstation 4.0 18 Accept the default Network Protocol TCP/IP and click on any additional protocols, then click “Next.” (If you do not have the required Protocols information, contact your network administrator.) 19 At the “Network Services:” prompt,...

Page 27 - To complete the installation, select “Yes” to reboot your computer.

Connecting to a Windows NT Server 3.51 Windows NT Workstation 4.0 34 To complete the installation, select “Yes” to reboot your computer. c905.bk : ch_8.fb4 Page 4 Thursday, October 22, 1998 9:51 AM

Page 28 - Connecting to a Windows NT Server 4.0

Connecting to a Windows NT Server 4.0 Windows for Workgroups ver. 3.11 Connecting to a Windows NT Server 4.0 Windows for Workgroups ver. 3.11 Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • 3COM Etherlink 3C905 Ethernet card and drivers disk ver. 4.3. • DOS ODI Name...