HP 1101 - Manuals
HP 1101 – Manual in PDF format online.
Manuals:
Manual HP 1101
Summary
Revision history Revision Publication date Description A October 2009 ● Chapter 1 — Updated toincorporate Windows 7 and the HPMini 110 by Studio Tord Boontje ● Chapter 3 — New and updatedspare parts and descriptions ● Chapter 4 — New and updatedspare parts and descriptions ● Chapter 6 — Updated toin...
Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the device, do not place the device directly on your lap or obstruct the device air vents. Use the device only on a hard, flat surface.Do not allow another hard surface, such as an adjoining optional ...
Table of contents 1 Product description 2 External component identification Top components ................................................................................................................................... 5 TouchPad .....................................................................
1 Product description Category Description HP Mini1101 HP Mini 110 HP Mini 110 byStudio TordBoontje Compaq Mini 110 Product name HP Mini 1101 √ HP Mini 110 √ HP Mini 110 by Studio TordBoontje √ Compaq Mini 110 √ Processor Intel® Atom™ N280 1.66-GHzprocessor, 512-KB Level2 cache, 533-MHz front-side b...
2 External component identification Components included with the device may vary by region and model. The illustrations in this chapteridentify the standard features on most device models. Top components TouchPad Component Description (1) Left TouchPad button Functions like the left button on an ext...
Light Component Description Caps lock light On: Caps lock is on. 6 Chapter 2 External component identification
Keys NOTE: Refer to the illustration that most closely matches your computer. Component Description (1) Function keys Execute frequently used system functions whenpressed in combination with the fn key. (2) fn key Executes frequently used system functions whenpressed in combination with a function k...
Bottom components Component Description (1) Battery bay Holds the battery. (2) Battery release latches (2) Release the battery from the battery bay. (3) Vent Enables airflow to cool internal components. NOTE: The device fan starts up automatically to cool internal components and prevent overheating....
Wireless antennas Component Description (1) WWAN antennas (2) (select models only)* Send and receive wireless signals to communicate with wirelesswide-area networks (WWANs). NOTE: This option is not available on computers with Mobile Mi installed. (2) WLAN antennas (2)* Send and receive wireless sig...
3 Illustrated parts catalog Service tag When ordering parts or requesting information, provide the computer serial number and modeldescription provided on the service tag: (1) Product name: This is the product name affixed to the front of the device. (2) Serial number (s/n): This is an alphanumeric ...
Miscellaneous parts Description Spare part number 30-W UMA AC adapter 496813-001 Bluetooth® adapter 574670-001 High-definition video decoder 578237-001 Power cords For use in Argentina 490371-D01 For use in Australia 490371-011 For use in Brazil 490371-201 For use in Denmark 490371-081 For use in Eu...
4 Removal and replacement procedures Preliminary replacement requirements Tools required You will need the following tools to complete the removal and replacement procedures: ● Flat-bladed screwdriver ● Magnetic screwdriver ● Phillips P0 and P1 screwdrivers Service considerations The following secti...
Drive handling CAUTION: Drives are fragile components that must be handled with care. To prevent damage to the device, damage to a drive, or loss of information, observe these precautions: Before removing or inserting a hard drive, shut down the device. If you are unsure whether the deviceis off or ...
Grounding guidelines Electrostatic discharge damage Electronic components are sensitive to electrostatic discharge (ESD). Circuitry design and structuredetermine the degree of sensitivity. Networks built into many integrated circuits provide some protection,but in many cases, ESD contains enough pow...
Equipment guidelines Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation. ● When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexible strapswith a minimum of one megohm ±10% resistance in the ground cords. To provide proper ...
Component replacement procedures This chapter provides removal and replacement procedures. There are as many as 65 screws, in 9 different sizes, that must be removed, replaced, or loosened whenservicing the device. Make special note of each screw size and location during removal and replacement. Ser...
Device feet The device feet are adhesive-backed rubber pads, tethered to the base enclosure. Description Spare part number Rubber Kit 537618-001 Component replacement procedures 43
Battery Description Spare part number 6-cell lithium-polymer (Li-Pol) battery (2.55-Ah, 55-Wh) 537627-001 3-cell lithium-polymer (Li-Pol) battery (2.55-Ah, 28-Wh) 537626-001 Before disassembling the device, follow these steps: 1. Shut down the device. If you are unsure whether the device is off or i...
SIM NOTE: This section applies only to device models with WWAN capability. NOTE: If there is a SIM inserted in the SIM slot, it must be removed before disassembling the computer. Be sure that the SIM is reinserted in the SIM slot after reassembling the computer. Before removing the SIM, follow these...
Memory module Description Spare part number Memory module (PC2-5300, 533-MHz, DDR2) 512-MB (for use in HP Mini 110 and Compaq Mini 110 only) 537663-001 1024-MB 537664-001 2048-MB 537665-001 Before removing the memory module, follow these steps: 1. Shut down the device. If you are unsure whether the ...
Keyboard Description Spare part number For use only on black and blue models with Windows operating system installed ● For use only in Brazil 535689-201 ● For use only in the Czech Republic 535689-221 ● For use only in Europe 535689-A41 ● For use only in Finland, Norway, and Sweden 535689-DH1 ● For ...
RTC battery Description Spare part number RTC battery 537616-001 Before removing the real-time clock (RTC) battery, follow these steps: 1. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the deviceon, and then shut it down through the operating system. 2. Di...
Top cover Description Spare part number Top cover (includes TouchPad) ● For use with black and blue models only 537622-001 ● For use with pink HP models only 537625-001 ● For use with white HP models only 537624-001 ● For use with HP Mini 110 by Studio Tord Boontje models only 579615-001 Before remo...
WLAN module Description Spare part number WLAN/Bluetooth combination module 575920-001 Broadcom 4312 802.11/b/g/n WLAN module For use in Canada, the Cayman Islands, Guam, Puerto Rico, the U.S. Virgin Islands,and the United States 518436-001 For use in Afghanistan, Albania, Algeria, Andorra, Angola, ...
WWAN module NOTE: Not available for computers with Mobile Mi installed. Description Spare part number HP un2400 Mobile Broadband Module (select models only) 483377-002 HP un2400 Mobile Broadband Module for use only with Verizon Wireless (select models only) 483377-003 WWAN module for use only in the...
Fan Description Spare part number Fan 537613-001 NOTE: To properly ventilate the device, allow at least a 7.6-cm (3-inch) clearance on the left side of the device. The device uses an electric fan for ventilation. The fan is controlled by a temperature sensorand is designed to turn on automatically w...
Heat sink assembly Description Spare part number Heat sink assembly (includes replacement thermal material) 537619-001 Before removing the heat sink assembly, follow these steps: 1. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the deviceon, and then shut ...
System board Description Spare part number System board (includes processor and replacement thermal material) Includes Intel Atom N280 1.66-GHz processor, 512-KB Level 2 cache, 533-MHz front-side bus (FSB) For use on the following model numbers only: HP: 110-1000 — 110-1099 and Compaq: 110c-1000— 11...
Display assembly NOTE: Each display assembly spare part kit includes 1 webcam, 1 microphone, 1 speaker box, and 2 WLAN antenna transceivers/cables; WWAN on select models only. Description Spare part number For use with black HP models only ● 10.1-inch, high-definition, AntiGlare display assembly (in...
5 Setup Utility Starting the Setup Utility The Setup Utility is a ROM-based information and customization utility that can be used even when youroperating system is not working. The utility reports information about the device and provides settings for startup, security, and otherpreferences. To sta...
Setup Utility menus The menu tables in this section provide an overview of Setup Utility options. NOTE: Some of the Setup Utility menu items listed in this chapter may not be supported by your device. Main menu Select To do this System information ● View and change the system time and date. ● View i...
Diagnostics menu Select To do this Hard Disk Self Test (select models only) Run a comprehensive self-test on the hard drive. Memory Test Run a diagnostic test on the system memory. 86 Chapter 5 Setup Utility
6 Specifications Device specifications Metric U.S. Dimensions Depth 16.67 cm 6.56 in Width 26.17 cm 10.30 in Height 2.52 cm 0.99 in Weight 10.1-in. LCD, equipped with a 3-cell battery, hard drive, 1-GBmemory, WLAN module, and 2 wireless antennas 1.11 kg 2.45 lb 10.1-in. LCD, equipped with a 3-cell b...
Hard drive specifications 160-GB to 320-GB* Dimensions Height 9.5 mm Width 70 mm Weight 101 g Interface type PATA Transfer rate 100 MB/sec Security ATA security Seek times (typical read, including setting) Single track 3 ms Average 13 ms Maximum 24 ms Logical blocks 117,210,240 Disc rotational speed...
System DMA specifications Hardware DMA System function DMA0 Not applicable DMA1* Not applicable DMA2* Not applicable DMA3 Not applicable DMA4 Direct memory access controller 92 Chapter 6 Specifications
System I/O address specifications I/O address (hex) System function (shipping configuration) 000 - 00F DMA controller 000 - CF7 PCI bus 010 - 01F Motherboard resources 020 - 021 Programmable interrupt controller 022 - 03F Motherboard resources 040 - 043 System timer 044 - 05F Motherboard resources 0...
System memory map specifications Memory address System function 00000000 - 0009FFFF System board 000A0000 - 000BFFFF Mobile Intel® 945 Express Chipset Family 000A0000 - 000BFFFF PCI bus 000C0000 - 000CFFFF System board 000D0000 - 000DFFFF PCI bus 000E0000 - 000FFFFF System board 00100000 - 3F7FFFFF ...
7 Screw listing This section provides specification and reference information for the screws and screw locks used inthe device. All screws listed in this section are available in the Screw Kit, spare part number 537620-001;or in the Display Screw Kit, spare part number 538510-001. Phillips PM1.5×1.0...
8 Backup and recovery Select the section in this chapter that applies to the operating system installed on your computer. 109
Mobile Mi backup and recovery Use the instructions in this section if Mobile Mi is installed on your computer. To protect your information, back up your files and folders. Then if the system fails, you can restore yourimportant files from copies. You can also use the options listed in this section t...
Using System Restore NOTE: System Restore is the recommended option to restore the original operating system. To restore the original operating system and programs using the System Restore utility that is installedon the device, follow these steps: 1. Turn on or restart the device, and then press th...
6. Select HP Mi Restore Image Creator (for Windows) . 7. Select Download only . 8. Save ImageCreator.msi to the Windows computer. 9. Double-click ImageCreator.msi and follow the on-screen instructions to install HP Mi Restore Image Creator. 10. Insert the USB flash drive into a USB port on the Windo...
Windows 7 backup and recovery Use the instructions in the section if Windows 7 is installed on your computer. To protect your information, back up your files and folders. In case of system failure, you can use thebackup files to restore your computer. CAUTION: In the event of a hard drive failure, y...
NOTE: Be sure that the computer is connected to AC power before you start the backup process. 1. Select Start>All Programs> Roxio . 2. Select BackOnTrack>BackOnTrack Home>Disaster Recovery . 3. Select Backup drive . 4. Select a drive to back up. 5. Add a comment to describe the backup. N...
3. Enter the SoftPaq number SP42226 in the Search box, press enter , and then follow the on-screen instructions. 4. Select Download only to save the file to your computer. 5. When prompted, select Save , and then select the external drive from the list of storage locations. 6. After the file is down...
Using the Instant Restore utility when the operating system is not functioning To recover information when the operating system is not functioning, follow these steps: 1. Restart the computer. NOTE: If the operating system has stopped responding and the computer screen is blue, restart the computer ...
3. Select the System Protection tab. 4. Under Protection Settings , select the disk for which you want to create a restore point. 5. Select Create . 6. Follow the on-screen instructions. Restoring to a previous date and time To revert to a restore point (created at a previous date and time) when the...
● You can back up your information to an optional external hard drive, a network drive, or discs. ● When backing up to discs, use any of the following types of discs (purchased separately): CD-R,CD-RW, DVD+R, DVD-R, or DVD±RW. The discs you use depend on the type of optical drive youare using. NOTE:...
To create a set of recovery discs: 1. Select Start>All Programs>Recovery Manager>Recovery Disc Creation . 2. Follow the on-screen instructions. Performing a recovery NOTE: You can recover only files that you have previously backed up. HP recommends that you use Recovery Manager to create a ...
NOTE: It may take several minutes for Recovery Manager to load. 2. In the Recovery Manager window, select System Recovery . 3. Follow the on-screen instructions. Windows 7 backup and recovery 121
Windows Vista backup and recovery Use the instructions in this section if Windows Vista is installed on your computer. Backing up your information Recovery after a system failure is as complete as your most current backup. You should create yourinitial backup immediately after software setup. As you...
Using the Windows recovery tools To recover information you previously backed up, follow these steps: 1. Select Start > All Programs > Maintenance > Backup and Restore Center . 2. Follow the on-screen instructions to recover your entire computer (select models only) or your files. NOTE: Win...
Using f11 CAUTION: Using f11 completely erases hard drive contents and reformats the hard drive. All files you have created and any software installed on the computer are permanently removed. The f11 recovery tool reinstalls the operating system and HP programs and drivers that were installed at the...
Windows XP backup and recovery Use the instructions in this section if Windows XP is installed on your computer. To protect your information, use the Windows® Backup utility (select models only) to back up files andfolders or create recovery points. In case of system failure, you can use the backup ...
NOTE: Be sure that the computer is connected to AC power before you start the backup process. NOTE: The backup process may take over an hour, depending on file size and the speed of the computer. 1. Select Start > All Programs > Accessories > System Tools > Backup . 2. Follow the on-scre...
9 Connector pin assignments Audio-in (microphone) Pin Signal 1 Audio signal in 2 Audio signal in 3 Ground 128 Chapter 9 Connector pin assignments
External monitor Pin Signal 1 Red analog 2 Green analog 3 Blue analog 4 Not connected 5 Ground 6 Ground analog 7 Ground analog 8 Ground analog 9 +5 VDC 10 Ground 11 Monitor detect 12 DDC 2B data 13 Horizontal sync 14 Vertical sync 15 DDC 2B clock 130 Chapter 9 Connector pin assignments
Universal Serial Bus Pin Signal 1 +5 VDC 2 Data - 3 Data + 4 Ground 132 Chapter 9 Connector pin assignments
10 Power cord set requirements The wide range input feature of the device permits it to operate from any line voltage from 100 to 120volts AC or from 220 to 240 volts AC. The 3-conductor power cord set included with the device meets the requirements for use in the countryor region where the equipmen...
Requirements for specific countries and regions Country/region Accredited agency Applicable note number Australia EANSW 1 Austria OVE 1 Belgium CEBC 1 Canada CSA 2 Denmark DEMKO 1 Finland FIMKO 1 France UTE 1 Germany VDE 1 Italy IMQ 1 Japan METI 3 The Netherlands KEMA 1 Norway NEMKO 1 The People's R...
11 Recycling Battery When a battery has reached the end of its useful life, do not dispose of the battery in general householdwaste. Follow the local laws and regulations in your area for computer battery disposal. Display WARNING! The backlight contains mercury. Exercise caution when removing and h...
Index A AC adapter, spare part number 28 administrator password 85antenna removal 82spare part number 25, 76 antennas 15applications key, Windows 7audio, product description 2audio-in (microphone) jack 12audio-out (headphone) jack 12audio-in jack pin assignments 128 audio-out jack pin assignments 12...
HP Manuals
-
HP CM1312 MFP
Manual
-
HP DV2700
Manual
-
HP 203A
Manual
-
HP 13-2000
Manual
-
HP 1320NW
Manual
-
HP D4360
Manual
-
HP W19Q
Manual
-
HP FC2143
Manual
- HP ZV6000 Manual
-
HP 7500
Manual
-
HP C4591A
Manual
-
HP E4411B
Manual
-
HP N6310
Manual
- HP nx7000 Manual
-
HP DL120
Manual
- HP w1707 Manual
-
HP CV136A#B1H
Manual
-
HP X585z
Manual
-
HP 686714-S01
Manual
- HP 1200 series Manual