Hilti 2141090 - Manuals - manualsarea.com

Page 4 - Safety

2 The type designation and serial number are printed on the type identification plate. ▶ Write down the serial number in the table below. You will be required to state the product details when contacting Hilti Service or your local Hilti organization to inquire about the product. Product information...

Page 6 - Hilti; Service after the battery has cooled down.

4 ▶ If the battery is too hot to touch, it may be defective. In this case, place the power tool in a non-flammable location, well away from flammable materials, where it can be kept under observation and left to cool down. Contact Hilti Service after the battery has cooled down. Printed: 27.07.2016 ...

Page 9 - Description

7 3 Description 3.1 Product overview Printed: 27.07.2016 | Doc-Nr: PUB / 5293001 / 000 / 00

Page 10 - Technical data

8 @ Hex. socket (SID) ; Illumination = Forward/reverse selector switch with safety lock % Control switch (with electronic speed control) & Square drive (SIW) ( Torque selector button ) Belt hook (optional) + Battery state of charge indicator § Release buttons (B18/B22 battery) / Release button (...

Page 12 - Operation

10 SIW 14A SIW 22A 1/2″ square drive with ball- notch reten- tion 3/8″ square drive with locking ring 1/2″ square drive with ball- notch reten- tion 3/8″ square drive with locking ring Torque Setting I 59 ftlb f (80 Nm) 48 ftlb f (65 Nm) 66 ftlb f (90 Nm) 55 ftlb f (75 Nm) Setting II 89 ftlb f (12...

Page 13 - Note; be fitted to allow attachment on the left or right side of the body.; Fitting an accessory tool; Check that the connection end of the accessory tool is clean.; Result; The connection end is dirty.; Removing the accessory tool; The accessory tool may be hot or have sharp edges.

11 Note The belt hook allows the power tool to be attached to a belt worn by the operator. The belt hook can be fitted to allow attachment on the left or right side of the body. ▶ Fit the belt hook. 5.3 Fitting an accessory tool SID 14ASID 22A 1. Check that the connection end of the accessory tool...

Page 15 - Pull the accessory tool off the square drive.; Setting the torque; to the left of the button.; Setting forward or reverse rotation; An interlock prevents switching while the motor is running.

13 1. Set the forward/reverse switch to the middle position or remove the battery from the power tool. 2. Pull the accessory tool off the square drive. 5.7 Setting the torque Technical data Model SID … (SID 14A OR SID 22A) ?? → page 9Model SIW … (SIW 14A OR SIW 22A) ?? → page 9 ▶ Press the torqu...

Page 16 - Screws/bolts or the workpiece may be damaged by excessively high; Removing the battery

14 ▶ Set the forward/reverse switch to the desired direction of rotation. 5.9 Screwdriving WARNING Risk of injury and damage. Screws/bolts or the workpiece may be damaged by excessively high torque; this may also lead to serious injury. ▶ Ensure that the fastener and attachment will withstand the le...

Page 17 - Care, maintenance, transport and storage

15 6 Care, maintenance, transport and storage 6.1 Care and maintenance of cordless tools WARNING Danger of electric shock! Carrying out care and maintenance while the battery is fitted presents a risk of serious physical injury and burning injury. ▶ Always remove the battery before carrying out all ...