Hilti 3554449 - User Manual
Hilti 3554449 Impact Driver – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – Safety
- Page 6 – Hilti; Service after the battery has cooled down.
- Page 9 – Description
- Page 10 – Technical data
- Page 12 – Operation
- Page 13 – Note; be fitted to allow attachment on the left or right side of the body.; Fitting an accessory tool; Check that the connection end of the accessory tool is clean.; Result; The connection end is dirty.; Removing the accessory tool; The accessory tool may be hot or have sharp edges.
- Page 15 – Pull the accessory tool off the square drive.; Setting the torque; to the left of the button.; Setting forward or reverse rotation; An interlock prevents switching while the motor is running.
- Page 16 – Screws/bolts or the workpiece may be damaged by excessively high; Removing the battery
- Page 17 – Care, maintenance, transport and storage
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 The type designation and serial number are printed on the type identification plate. ▶ Write down the serial number in the table below. You will be required to state the product details when contacting Hilti Service or your local Hilti organization to inquire about the product. Product information...
4 ▶ If the battery is too hot to touch, it may be defective. In this case, place the power tool in a non-flammable location, well away from flammable materials, where it can be kept under observation and left to cool down. Contact Hilti Service after the battery has cooled down. Printed: 27.07.2016 ...
7 3 Description 3.1 Product overview Printed: 27.07.2016 | Doc-Nr: PUB / 5293001 / 000 / 00
