AEG FFB53630ZM- User Manual

4. CONTROL PANEL 1 2 4 5 6 8 3 7 1 On/off button 2 Program button 3 Programme indicators 4 Display 5 Delay button 6 Option button 7 Indicators 8 Start button 4.1 Indicators Indicator Description Washing phase. It comes on when the washing phase operates. Rinsing phase. It comes on when the rinsing p...

Indicator Description Delay indicator. Door indicator. It comes on when the appliance door is open or is not cor-rectly closed. 5. PROGRAMMES Programme Degree of soilType of load Programme phases Options 1) • Normal soil• Crockery and cutlery • Prewash• Wash 50 °C• Rinses• Dry • TimeSaver• XtraDry 2...

Programme 1) Water (l) Energy (kWh) Duration (min) 13 - 15 1.4 - 1.6 140 - 160 9 0.8 30 13 - 14 0.9 - 1.1 70 - 85 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values. 5.2 Information for test institutes Fo...

• The indicators and are off. • The indicator still flashes. • The display shows the current setting. – = rinse aid empty notification activated. – = rinse aid empty notification deactivated. 2. Press Start to change the setting. 3. Press on/off to confirm the setting. 6.4 AirDry AirDry improves the...

Activating options can affect the water and energy consumption as well as the programme duration. 7.1 XtraDry Activate this option to boost the drying performance. With XtraDry on, the duration of some programmes, water consumption and the last rinse temperature can be affected.XtraDry is a permanen...

4. Carefully shake the funnel by its handle to get the last granules inside. 5. Remove the salt around the opening of the salt container. 6. Turn the cap of the salt container clockwise to close the salt container. CAUTION! Water and salt can come out of the salt container when you fill it. After yo...

Opening the door while the appliance operates Opening the door while a programme is running stops the appliance. It may affect the energy consumption and the programme duration. After closing the door, the appliance continues from the point of interruption. If the door is opened for more than 30 sec...

11. CARE AND CLEANING WARNING! Before maintenance, deactivate the appliance and disconnect the mains plug from the main socket. Dirty filters and clogged spray arms decrease the washing results. Make a check regularly and, if necessary, clean them. 11.1 Cleaning the filters The filter system is made...

CAUTION! An incorrect position of the filters can cause bad washing results and damage to the appliance. 11.2 Cleaning the spray arms Do not remove the spray arms. If the holes in the spray arms are clogged, remove remaining parts of soil with a thin pointed object. 11.3 External cleaning • Clean th...

Problem and alarm code Possible cause and solution The appliance trips the cir-cuit-beaker. • The amperage is insufficient to supply simultaneously all the appliances in use. Check the socket amperage andthe capacity of the meter or turn off one of the applian-ces in use. • Internal electrical fault...

Refer to "Before first use" , "Daily use" or "Hints and tips" for other possible causes. 13. TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 600 / 850 / 625 Electrical connection 1) Voltage (V) 220 - 240 Frequency (Hz) 50 Water supply pressure Min. / max. bar (MP...