AEG FAVORIT 88060 i- User Manual

Page 2 - Visit our website for:; CUSTOMER CARE AND SERVICE

CONTENTS 1. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3. CONTROL PANEL . . . . . ...

Page 3 - SAFETY INSTRUCTIONS; Children and vulnerable; Only for UK and Ireland.; Water connection

1. SAFETY INSTRUCTIONS Before the installation and use of the ap-pliance, carefully read the supplied in-structions. The manufacturer is not re-sponsible if an incorrect installation anduse causes injuries and damages. Alwayskeep the instructions with the appliancefor future reference. 1.1 Children ...

Page 5 - PRODUCT DESCRIPTION; TimeBeam

2. PRODUCT DESCRIPTION 1 2 3 4 5 8 10 6 7 12 9 11 1 Top spray arm 2 Upper spray arm 3 Lower spray arm 4 Filters 5 Rating plate 6 Salt container 7 Water hardness dial 8 Rinse aid dispenser 9 Detergent dispenser 10 Cutlery basket 11 Lower basket 12 Upper basket 2.1 TimeBeam TimeBeam is a light beam th...

Page 6 - CONTROL PANEL; Indicators; Salt indicator. It is always off while the programme operates.; PROGRAMMES; Programme; ÖKO PLUS

3. CONTROL PANEL 1 2 3 4 5 6 7 8 9 1 On/off button 2 Display 3 Delay touchpad 4 Program touchpad 5 ExtraHygiene touchpad 6 ÖKO PLUS touchpad 7 Multitab touchpad 8 RESET touchpad 9 Indicators Indicators Description Salt indicator. It is always off while the programme operates. Rinse aid indicator. It...

Page 7 - ExtraHygiene; Consumption values

Programme Degree of soilType of load Programmephases Options 6 Normal soilCrockery and cut-lery Wash 55 °CRinses ExtraHygiene 7 Normal or light soilDelicate crockeryand glassware Wash 45 °CRinsesDry ÖKO PLUS 8 6) All Prewash 1) The appliance senses the degree of soil and the quantity of items in the...

Page 8 - Information for test institutes; OPTIONS; Multitab

Programme 1) Duration(min) Energy(kWh) Water(l) 6 50 - 60 1.0 - 1.1 10 - 11 7 70 - 80 0.8 - 0.9 11 - 12 8 14 0.1 4 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values. Information for test institutes For a...

Page 9 - Acoustic signals; On; Setting the TimeBeam; BEFORE FIRST USE

How to activate the ExtraHygieneoption1. Press ExtraHygiene . The related in- dicator comes on. In the display youcan see the update of the pro-gramme duration. 5.4 Acoustic signals The acoustic signals operate in theseconditions:• The programme is completed.• The level of the water softener is ad- ...

Page 10 - Adjusting the water softener; Manual adjustment

6.1 Adjusting the water softener Water hardness Water softener adjustment German degrees (°dH) French degrees (°fH) mmol/l Clarke degrees Manual Elec- tronic 47 - 50 84 - 90 8.4. - 9.0 58 - 63 2 1) 10 43 - 46 76 - 83 7.6 - 8.3 53 - 57 2 1) 9 37 - 42 65 - 75 6.5 - 7.5 46 - 52 2 1) 8 29 - 36 51 - 64 5...

Page 11 - DAILY USE

6.2 Filling the salt container 1. Turn the cap counterclockwise andopen the salt container. 2. Put 1 litre of water in the salt con-tainer (only for the first time). 3. Fill the salt container with dishwash-er salt. 4. Remove the salt around the openingof the salt container. 5. Turn the cap clockwis...

Page 12 - Using the detergent; Setting and starting a; Cancelling the programme; RESET

5. Set and start the correct programmefor the type of load and the degreeof soil. 7.1 Using the detergent 20 30 M A X 1 2 3 4 + - A B C 1. Press the release button ( B ) to open the lid ( C ). 2. Put the detergent in the compart-ment ( A ) . 3. If the programme has a prewashphase, put a small quanti...

Page 13 - At the end of the programme; Important; HINTS AND TIPS; The water softener

At the end of the programme The display shows 0 and the end indica-tor comes on. 1. Press the on/off button to deactivatethe appliance. 2. Close the water tap. If you do not press the on/offbutton, the AUTO OFF functionautomatically deactivates the ap-pliance a few minutes after theend of the progra...

Page 14 - CARE AND CLEANING; Cleaning the filters

• Make sure that the spray arms can move freely before you start a pro-gramme. 8.4 Before starting a programme Make sure that: • The filters are clean and correctly in- stalled. • The spray arms are not clogged. • The position of the items in the bas- kets is correct. • The programme is applicable f...

Page 15 - Cleaning the spray arms; TROUBLESHOOTING; Problem; The programme does not start.

6. Make sure that the filter ( B ) is cor- rectly positioned under the 2 guides( C ). 7. Assemble the filter ( A ) and put it back in filter ( B ). Turn it clockwise until it locks. An incorrect position of the filterscan cause bad washing resultsand damage to the appliance. 9.2 Cleaning the spray a...

Page 16 - Make sure that the water tap is not clogged.; If the washing and drying; Dishes are wet; How to activate the rinse; Off

Problem Possible solution Make sure that the pressure of the watersupply is not too low. For this information,contact your local water authority. Make sure that the water tap is not clogged. Make sure that the filter in the inlet hose isnot clogged. Make sure that the inlet hose has no kinks orbends...

Page 17 - TECHNICAL INFORMATION; ENVIRONMENT CONCERNS

6. Adjust the released quantity of rinseaid. 7. Fill the rinse aid dispenser. 11. TECHNICAL INFORMATION Dimensions Width / Height / Depth(mm) 596 / 818 - 898 / 55 Electrical connection Refer to the rating plate. Voltage 220-240 V Frequency 50 Hz Water supply pressure Min. / max. (bar / MPa) (0.5 / 0...

AEG FAVORIT 88060 i- User Manual

Table of Contents:

Summary

Other AEG Models